Re: [Freeipmi-users] ipmi-sensors with Intel SE7210

[Alexey V Paramonov]

Hi,
here you are:
(I don't know what theese strange characters mean, such as "BMC I2C 
device", maybe this is because of my terminal encoding, or unicode)

=============================================================================
localhost ~ # ipmi-raw -D ssif 0 6 1
rcvd: 01 00 20 81 02 40 51 9F 22 03 00 11 43
=============================================================================
localhost ~ # ipmi-locate
Probing KCS device using DMIDECODE... done
IPMI Version: 28.229
IPMI locate driver: UNKNOWN
IPMI locate driver: 212
IPMI interface: UNKNOWN
BMC I2C device: юІфQ▒©є█ПЇ√
ІЇDЕкЇ└Q▒©─
BMC memory base address: BF91558400000001
Register space: 8

Probing SMIC device using DMIDECODE... done
IPMI Version: 28.229
IPMI locate driver: UNKNOWN
IPMI locate driver: 212
IPMI interface: UNKNOWN
BMC I2C device: юІфQ▒©є█ПЇ√
ІЇDЕкЇ└Q▒©─
BMC memory base address: BF91558400000001
Register space: 8

Probing BT device using DMIDECODE... done
IPMI Version: 28.229
IPMI locate driver: UNKNOWN
IPMI locate driver: 212
IPMI interface: UNKNOWN
BMC I2C device: юІфQ▒©є█ПЇ√
ІЇDЕкЇ└Q▒©─
BMC memory base address: BF91558400000001
Register space: 8

Probing SSIF device using DMIDECODE... FAILED

Probing KCS device using SMBIOS... done
IPMI Version: 1.5
IPMI locate driver: UNKNOWN
IPMI locate driver: 0
IPMI interface: SSIF
BMC I2C device: /dev/i2c-0
BMC SMBUS slave address: 42
Register space: 1

Probing SMIC device using SMBIOS... done
IPMI Version: 1.5
IPMI locate driver: UNKNOWN
IPMI locate driver: 0
IPMI interface: SSIF
BMC I2C device: /dev/i2c-0
BMC SMBUS slave address: 42
Register space: 1

Probing BT device using SMBIOS... done
IPMI Version: 1.5
IPMI locate driver: UNKNOWN
IPMI locate driver: 0
IPMI interface: SSIF
BMC I2C device: /dev/i2c-0
BMC SMBUS slave address: 42
Register space: 1

Probing SSIF device using SMBIOS... FAILED

Probing KCS device using ACPI... done
IPMI Version: 1.5
IPMI locate driver: SMBIOS
IPMI locate driver: 0
IPMI interface: SSIF
BMC I2C device: /dev/i2c-0
BMC SMBUS slave address: 4
Register space: 1

Probing SMIC device using ACPI... done
IPMI Version: 1.5
IPMI locate driver: SMBIOS
IPMI locate driver: 0
IPMI interface: SSIF
BMC I2C device: /dev/i2c-0
BMC SMBUS slave address: 4
Register space: 1

Probing BT device using ACPI... done
IPMI Version: 1.5
IPMI locate driver: SMBIOS
IPMI locate driver: 0
IPMI interface: SSIF
BMC I2C device: /dev/i2c-0
BMC SMBUS slave address: 4
Register space: 1

Probing SSIF device using ACPI... done
IPMI Version: 1.5
IPMI locate driver: SMBIOS
IPMI locate driver: 0
IPMI interface: SSIF
BMC I2C device: /dev/i2c-0
BMC SMBUS slave address: 4
Register space: 1

Probing KCS device using PCI... done
IPMI Version: 1.5
IPMI locate driver: SMBIOS
IPMI locate driver: 0
IPMI interface: SSIF
BMC I2C device: /dev/i2c-0
BMC SMBUS slave address: 4
Register space: 1

Probing SMIC device using PCI... done
IPMI Version: 1.5
IPMI locate driver: SMBIOS
IPMI locate driver: 0
IPMI interface: SSIF
BMC I2C device: /dev/i2c-0
BMC SMBUS slave address: 4
Register space: 1

Probing BT device using PCI... done
IPMI Version: 1.5
IPMI locate driver: SMBIOS
IPMI locate driver: 0
IPMI interface: SSIF
BMC I2C device: /dev/i2c-0
BMC SMBUS slave address: 4
Register space: 1

Probing SSIF device using PCI... done
IPMI Version: 1.5
IPMI locate driver: SMBIOS
IPMI locate driver: 0
IPMI interface: SSIF
BMC I2C device: /dev/i2c-0
BMC SMBUS slave address: 4
Register space: 1

KCS device default values:

SMIC device default values:

BT device default values:
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI locate driver: 0
IPMI interface: SMIC
BMC I2C device:
BMC I/O base address: CA9
Register space: 1

SSIF device default values:
=============================================================================


Bala.A:
> Hi Alexey,
>
> SSIF driver in main CVS version and latest stable version 0.2.3 work fine.
>  When testing SSIF interface, I have noticed that, sometimes mBMC doesn't
> response properly.
>
> Could you tell me output of the following commands?
>
> ipmi-locate
> ipmi-raw -D ssif 0 6 1
>
>
> Thanks,
>
> Bala
> ---
> Free as in freedom
> http://www.gnu.org/
>
>   
> > I just realized you're using an Intel box.  Do you have one of those
> > intel cards for IPMI.  I think they're called IMM?
> >
> > If not, I think that means the Intel box uses the SSIF interface.
> >
> > Bala, can comment more on that.  I'm not 100% if this code is working
> > yet.  Or it's partially working, but you have to pass something on the
> > command line.
> >
> > Al
> >
> > On Wed, 2006-07-26 at 10:56 +0400, Alexey V Paramonov wrote:
> >     
> > > I decided to start from the beginigng,
> > > cleaned all previous installations ( make uninstall ) and used 'find
> > > -name "*freeipmi*"' in /usr to check that nothing left after older
> > > installations.
> > > checked out CVS version today, ./configure --prefix=/usr; make; make
> > > install
> > > and now
> > >
> > > bmc-info hangs (loops forever, other posts to the list say that this is
> > > some kind of a general problem with  Intel SE7210? )
> > > and
> > >
> > > ipmi-sensors says:
> > > localhost ~ # ipmi-sensors
> > > ipmi_open_inband(): Invalid argument
> > >
> > >
> > > Anand Babu пишет:
> > >       
> > > > On Tue, Jul 25, 2006 at 01:37:01AM +0400, Alexey V Paramonov wrote:
> > > > ,----
> > > > | Hi all.
> > > > | Just installed freeipmi from CVS, bmc-info seems to work fine (see
> > > > | output below), but ipmi-sensors says "Cat ate the fish", please
> > > > | help.
> > > > |
> > > > | localhost ~ # ipmi-sensors
> > > > |
> > > > | >>--:>  >>--:>  >>--:> >>--:>
> > > > | ~ ~   Cat ate the fish!!  ~ ~
> > > > | >>--:>  >>--:>  >>--:> >>--:>
> > > > | Fish Exception Handler:
> > > > | tag        : unbound-variable
> > > > | throw args : (#f Unbound variable: ~S (sensors-argp) #f)
> > > > | data       : [/usr/sbin/ipmi-sensors]
> > > > | No backtrace available.
> > > > `----
> > > >
> > > > This looks like installation problem. sensors-common.scm is not
> > > > loaded. This can happen if your installation is broken.
> > > >
> > > > Check out for these things:
> > > > * make sure you don't have unnecessary sensors .scm file in current
> > > >   folder.
> > > > * multiple installations of freeipmi found
> > > > * tell us the output of
> > > >   $ which ipmi-sensors
> > > >   $ updatedb; locate sensors-common.scm
> > > >
> > > >
> > > >         
> > >
> > > _______________________________________________
> > > Freeipmi-users mailing list
> > > address@hidden
> > > http://lists.gnu.org/mailman/listinfo/freeipmi-users
> > >
> > >       
> > --
> > Albert Chu
> > address@hidden
> > 925-422-5311
> > Computer Scientist
> > High Performance Systems Division
> > Lawrence Livermore National Laboratory
> >
> >
> >
> > _______________________________________________
> > Freeipmi-users mailing list
> > address@hidden
> > http://lists.gnu.org/mailman/listinfo/freeipmi-users
> >
> >
> >     
>
>
>
>