Re: Nokia 6230i over IrDA

[Andrew \"ruskie\" Levstik]

Marco Arioli wrote :

> Hi,
> I have installed the latest gnokii and I'm trying to get it works with
> my new Nokia 6230i (firmware version 3.40 / 23-05-05 / RM-72) but
> without success.
> 
> Here is the debugging:
> 
> HOME> irdadump
> 10:44:06.396556 xid:cmd 059fda8d > ffffffff S=6 s=4 (14)
> 10:44:06.392716 xid:rsp 059fda8d < 0000f56f S=6 s=3 Nokia 6230i
> hint=b125 [ PnP Modem Fax Telephony IrCOMM IrOBEX ] (28)
> 10:44:06.484572 xid:cmd 059fda8d > ffffffff S=6 s=5 (14)
> 
> HOME> gnokii --identify
> GNOKII Version 0.6.9
> LOG: debug mask is 0x1
> phone instance config:
> model: 6510
> port_device: /dev/ircomm0
> connection_type: 0
> init_length: 0
> serial_baudrate: 19200
> serial_write_usleep: -1
> hardware_handshake: 0
> require_dcd: 0
> smsc_timeout: 100
> connect_script:
> disconnect_script:
> rfcomm_cn: 1
> sm_retry: off
> Connecting
> Serial device: opening device /dev/ircomm0
> Serial device: setting speed to 115200
> Serial device: setting RTS to low and DTR to low
> Getting model...
> Message sent: 0x1b / 0x0006
> 00 01 00 07 01 00                               |
> [Echo cancelled]
> SM_Block: exiting the retry loop
> Message sent: 0x1b / 0x0006
> 00 01 00 07 01 00                               |
> [Echo cancelled]
> 
> ...and so on
> 
> This is the /etc/gnokiirc
> 
> [global]
> port = /dev/ircomm0
> model = 6510
> initlength = default
> connection = serial
> use_locking = yes
> serial_baudrate = 19200
> smsc_timeout = 10
> 
> [gnokiid]
> bindir = /usr/local/sbin/
> 
> [connect_script]
> TELEPHONE = 12345678
> [disconnect_script]
> 
> [logging]
> debug = on
> rlpdebug = off
> xdebug = off
> 
> 
> Any ideas?
> 
> Gnokii worked good with my previous cell Nokia 6210 (model=7110).
> 
> Thanks,
> Marco Arioli
> 
> 
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gnokii-users
> 
> 

Try doing ifconfig irda0 and put the:
irda0     Link encap:IrLAP  HWaddr 42:9f:a3:76
the HWaddr into your port = 42:9f:a3:76
and no /dev entry anywhere... that's how I have it and it works...

-- 
Andrew "ruskie" Levstik
Source Mage GNU/Linux Games grimoire guru

Key id = 9A5117F8
Key fingerprint = 6731 FEF2 99A8 4672 5962  69AB 3DAF DA67 9A51 17F8