Nokia 6610 and serious warning from gnokii after gnokii --identify

[linux]

Hello,

after gnokii --identify i get a serious warning:

gnokii --identify
GNOKII Version 0.6.8
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1
LOG: xdebug mask is 0x1
phone instance config:
model: 6610
port_device: /dev/ircomm0
connection_type: 4
init_length: 0
serial_baudrate: 9600
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ircomm0
Nokia 6610      9183
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message received: 0x1b / 0x002e
01 31 00 08 00 01 58 28 00 21 56 20 34 2e 37 34 |  1    X( !V 4.74
0a 31 34 2d 30 34 2d 30 33 0a 4e 48 4c 2d 34 0a |  14-04-03 NHL-4
28 63 29 20 4e 4d 50 2e 0a 43 00 00 00 00       | (c) NMP. C
Received message type 1b
model length: 5
Received model NHL-4
Sorry, this function is known to break your phone (Nokia phones series 40 v1).
Refusing to do it. You may try to use AT driver. If you are brave enough to
test the driver anyway, please contact developers at address@hidden
See also http://thread.gmane.org/gmane.linux.drivers.gnokii/3195
Telephone interface init failed: Command called isn't implemented in model.
Quitting.
Serial device: closing device

I will use my 6610 only to connect my laoptop to internet. So the only thing I 
need is the moden. I hope it is ok to use this. Can I ignore the warning?

King regards

Peter