Re: xgnokii 0.6.19 with nokia 6021

[Maarten Vanraes]

> Hi,
>
> On 10/18/07, Maarten Vanraes <address@hidden> wrote:
>> nokia 6021
>> model: RM-94
>>
>> the 6021 is listed in the 6150 driver (i've seen it in the code).
>
> 6510 driver.

sorry typo

>> the first time i used it with the cable, it worked, without any changes,
>> it took a long time to connect, (first tried a bunch of serial things)
>> and
>> then it switched to FBUS and it worked, battery, signal level, etc...
>> all
>> was fast.
>>
>> the second time i execute it, it takes less time to connect to it, it
>> switches to FBUS quite fast, and it gets the model info and stuff, but
>> now
>> i can't see the battery level and signal level, and i get lotsa
>> 'SM_Block
>> exting retry loop'.
>>
>> any ideas?
>

config:
[global]

port = /dev/ttyUSB0
model = 6510
initlength = default
connection = serial
use_locking = yes
serial_baudrate = 19200
smsc_timeout = 10

[gnokiid]
bindir = /usr/sbin/

[connect_script]
TELEPHONE = 12345678
[disconnect_script]

[logging]

debug = on
rlpdebug = on
xdebug = off


log from xgnokii with the phone connected through the USB cable:

address@hidden ~]$ xgnokii
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1

(xgnokii:2817): Gtk-WARNING **: horizontal scrolling not implemented

(xgnokii:2817): Gtk-WARNING **: horizontal scrolling not implemented
phone instance config:
model: 6510
port_device: /dev/ttyUSB0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
[Received Ack of type 1b, seq: 80]
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
[Received Ack of type 1b, seq:  1]
[Sending Ack of type 1b, seq: 7]
Message received: 0x1b / 0x0032
01 39 00 08 00 01 58 2c 00 26 56 20 30 34 2e 39 |  9    X, &V 04.9
30 0a 30 39 2d 30 35 2d 30 36 0a 52 4d 2d 39 34 | 0 09-05-06 RM-94
0a 28 63 29 20 4e 6f 6b 69 61 2e 20 20 0a 43 00 |  (c) Nokia.   C
00 00                                           |
Received message type 1b
model length: 5
Received model RM-94
Identifying...
Message sent: 0x1b / 0x0005
00 01 00 00 41                                  |     A
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
[Received Ack of type 1b, seq:  2]
[Received Ack of type 1b, seq:  3]
[Sending Ack of type 1b, seq: 0]
Message received: 0x1b / 0x001a
01 39 00 01 00 01 41 14 00 10 33 35 34 38 33 38 |  9    A   354838
30 31 38 36 38 33 31 38 30 00                   | 018683180
Received message type 1b
Received imei 354838018683180
[Sending Ack of type 1b, seq: 1]
Message received: 0x1b / 0x0032
01 39 00 08 00 01 58 2c 00 26 56 20 30 34 2e 39 |  9    X, &V 04.9
30 0a 30 39 2d 30 35 2d 30 36 0a 52 4d 2d 39 34 | 0 09-05-06 RM-94
0a 28 63 29 20 4e 6f 6b 69 61 2e 20 20 0a 43 00 |  (c) Nokia.   C
00 00                                           |
Received message type 1b
Received revision V 04.90
model length: 5
Received model RM-94
Found model "RM-94"
Found model "RM-94"
Getting network info ...
Message sent: 0x0a / 0x0009
00 01 00 0b 00 02 00 00 00                      |
SM_Block: exiting the retry loop
Message sent: 0x0a / 0x0009
00 01 00 0b 00 02 00 00 00                      |
SM_Block: exiting the retry loop
Message sent: 0x0a / 0x0009
00 01 00 0b 00 02 00 00 00                      |
SM_Block: exiting the retry loop
Getting battery level...
Message sent: 0x17 / 0x0006
00 01 00 0a 02 00                               |
SM_Block: exiting the retry loop
Message sent: 0x17 / 0x0006
00 01 00 0a 02 00                               |
SM_Block: exiting the retry loop
Message sent: 0x17 / 0x0006
00 01 00 0a 02 00                               |
SM_Block: exiting the retry loop
Message sent: 0x19 / 0x0006
00 01 00 1f 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x19 / 0x0006
00 01 00 1f 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x19 / 0x0006
00 01 00 1f 01 00                               |
SM_Block: exiting the retry loop