gnokii-users
[Top][All Lists]
Advanced
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: xgnokii 0.6.19 with nokia 6021

From: Maarten Vanraes
Subject: Re: xgnokii 0.6.19 with nokia 6021
Date: Thu, 25 Oct 2007 20:59:24 +0200 (CEST)
User-agent: SquirrelMail/1.4.8 
I worked down from 0.6.19 to 0.6.14 (which was the one from my distro)

i did `./configure && make && gnokii/gnokii --identify` for each one

and only the 0.6.14 worked


except, when i re-executed with 'gnokii/gnokii --identify', all the others
worked...

something must be wrong with the compiling since 0.6.15, but i donno what.

in any case:
xgnokii doesn't give battery level and network status

so i tried to find the gnokii equivalent, but i could not find it.
what are the options to give to gnokii for battery level?
getnetworkinfo seemed to work, but i don't see the signal level there...

Sincerely,

Maarten


> testing logs:
>
> address@hidden alien]# gnokii --identify
> GNOKII Version 0.6.20cvs
> Couldn't read /root/.gnokiirc config file.
> Couldn't read /root/.gnokiirc config file.
> LOG: debug mask is 0x1
> LOG: rlpdebug mask is 0x1
> Config read from file /etc/gnokiirc.
> Lockfile /var/lock/LCK..ttyUSB0 is stale. Overriding it..
> phone instance config:
> model: 6021
> port_device: /dev/ttyUSB0
> connection_type: 2
> init_length: 0
> serial_baudrate: 19200
> serial_write_usleep: -1
> hardware_handshake: 0
> require_dcd: 0
> smsc_timeout: 100
> connect_script:
> disconnect_script:
> rfcomm_cn: 1
> sm_retry: off
> Connecting
> Serial device: opening device /dev/ttyUSB0
> Serial device: setting RTS to low and DTR to low
> Serial device: setting RTS to high and DTR to high
> Serial device: setting speed to 19200
> Switching to FBUS mode
>
>
> and then nothing happens...
>
>> (suggestion from pkot for me to use dku5 connection, now it works well.)
> had some segfault with SMS.
>>
>> recompiled CVS version.
>>
>> now i get this:
>>
>> address@hidden alien]# xgnokii
>> Couldn't read /root/.gnokiirc config file.
>> Couldn't read /root/.gnokiirc config file.
>> LOG: debug mask is 0x1
>> LOG: rlpdebug mask is 0x1
>> Config read from file /etc/gnokiirc.
>>
>> (xgnokii:16999): Gtk-WARNING **: horizontal scrolling not implemented
>>
>> (xgnokii:16999): Gtk-WARNING **: horizontal scrolling not implemented
> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> uid mismatch
>> phone instance config:
>> model: 6021
>> port_device: /dev/ttyUSB0
>> connection_type: 2
>> init_length: 0
>> serial_baudrate: 19200
>> serial_write_usleep: -1
>> hardware_handshake: 0
>> require_dcd: 0
>> smsc_timeout: 100
>> connect_script:
>> disconnect_script:
>> rfcomm_cn: 1
>> sm_retry: off
>> Connecting
>> Serial device: opening device /dev/ttyUSB0
>> Serial device: setting RTS to low and DTR to low
>> Serial device: setting RTS to high and DTR to high
>> Serial device: setting speed to 19200
>> Switching to FBUS mode
>>
>>
>> here it hangs, and does nothing...
>>
>>
>>> i tried some times and fiddled with settings, and right now it works,
> allthough i fear, next time it will not:
>>>
>>> only changed from 6510 to 6021 in config.
>>>
>>> logs from phone:
>>>
>>> address@hidden ~]$ xgnokii
>>> LOG: debug mask is 0x1
>>> LOG: rlpdebug mask is 0x1
>>>
>>> (xgnokii:3560): Gtk-WARNING **: horizontal scrolling not implemented
>>>
>>> (xgnokii:3560): Gtk-WARNING **: horizontal scrolling not implemented
> phone instance config:
>>> model: 6021
>>> port_device: /dev/ttyUSB0
>>> connection_type: 0
>>> init_length: 0
>>> serial_baudrate: 19200
>>> serial_write_usleep: -1
>>> hardware_handshake: 0
>>> require_dcd: 0
>>> smsc_timeout: 100
>>> connect_script:
>>> disconnect_script:
>>> rfcomm_cn: 1
>>> sm_retry: off
>>> Connecting
>>> Serial device: opening device /dev/ttyUSB0
>>> Serial device: setting speed to 115200
>>> Serial device: setting RTS to low and DTR to low
>>> Getting model...
>>> Message sent: 0x1b / 0x0006
>>> 00 01 00 07 01 00                               |
>>> [Received Ack of type 1b, seq: 80]
>>> Message sent: 0x1b / 0x0006
>>> 00 01 00 07 01 00                               |
>>> [Received Ack of type 1b, seq:  1]
>>> [Sending Ack of type 1b, seq: 4]
>>> Message received: 0x1b / 0x0032
>>> 01 39 00 08 00 01 58 2c 00 26 56 20 30 34 2e 39 |  9    X, &V 04.9 30
> 0a 30 39 2d 30 35 2d 30 36 0a 52 4d 2d 39 34 | 0 09-05-06 RM-94 0a 28 63
> 29 20 4e 6f 6b 69 61 2e 20 20 0a 43 00 |  (c) Nokia.   C 00 00
>                                     |
>>> Received message type 1b
>>> model length: 5
>>> Received model RM-94
>>> Identifying...
>>> Message sent: 0x1b / 0x0005
>>> 00 01 00 00 41                                  |     A
>>> Message sent: 0x1b / 0x0006
>>> 00 01 00 07 01 00                               |
>>> [Received Ack of type 1b, seq:  2]
>>> [Received Ack of type 1b, seq:  3]
>>> [Sending Ack of type 1b, seq: 5]
>>> Message received: 0x1b / 0x001a
>>> 01 39 00 01 00 01 41 14 00 10 33 35 34 38 33 38 |  9    A   354838 30
> 31 38 36 38 33 31 38 30 00                   | 018683180
>>> Received message type 1b
>>> Received imei 354838018683180
>>> [Sending Ack of type 1b, seq: 6]
>>> Message received: 0x1b / 0x0032
>>> 01 39 00 08 00 01 58 2c 00 26 56 20 30 34 2e 39 |  9    X, &V 04.9 30
> 0a 30 39 2d 30 35 2d 30 36 0a 52 4d 2d 39 34 | 0 09-05-06 RM-94 0a 28 63
> 29 20 4e 6f 6b 69 61 2e 20 20 0a 43 00 |  (c) Nokia.   C 00 00
>                                     |
>>> Received message type 1b
>>> Received revision V 04.90
>>> model length: 5
>>> Received model RM-94
>>> Found model "RM-94"
>>> Found model "RM-94"
>>> Getting network info ...
>>> Message sent: 0x0a / 0x0009
>>> 00 01 00 0b 00 02 00 00 00                      |
>>> [Received Ack of type 0a, seq:  4]
>>> [Sending Ack of type 0a, seq: 7]
>>> Message received: 0x0a / 0x000a
>>> 01 74 00 0c 00 01 04 04 64 51                   |  t      dQ
>>> Received message type 0a
>>> RF level 100,000000
>>> Getting battery level...
>>> Message sent: 0x17 / 0x0006
>>> 00 01 00 0a 02 00                               |
>>> [Received Ack of type 17, seq:  5]
>>> [Sending Ack of type 17, seq: 0]
>>> Message received: 0x17 / 0x000a
>>> 01 36 00 0b 01 01 16 04 07 07                   |  6
>>> Received message type 17
>>> Battery level 100,000000
>>>
>>> Message sent: 0x19 / 0x0006
>>> 00 01 00 1f 01 00                               |
>>> [Received Ack of type 19, seq:  6]
>>> [Sending Ack of type 19, seq: 1]
>>> Message received: 0x19 / 0x005e
>>> 01 33 00 20 01 0b 05 08 01 00 00 01 00 01 05 08 |  3
>>> 02 00 00 01 00 01 05 08 03 00 00 01 00 01 05 08 |
>>> 04 00 00 01 00 01 05 08 05 00 00 01 00 02 05 08 |
>>> 06 00 00 0a 00 0a 05 08 07 00 00 0a 00 0a 05 08 |
>>> 08 00 00 03 00 03 05 08 09 00 00 1e 00 1e 05 08 |
>>> 0a 00 00 3f 00 04 05 08 0b 00 00 64 00 64       |    ?       d d
> Received message type 19
>>> Incoming clock!
>>> Message sent: 0x19 / 0x0006
>>> 00 01 00 19 00 02                               |
>>> [Received Ack of type 19, seq:  7]
>>> [Sending Ack of type 19, seq: 2]
>>> Message received: 0x19 / 0x0006
>>> 01 33 00 1a 09 00                               |  3
>>> Received message type 19
>>> Incoming clock!
>>> Getting network info ...
>>> Message sent: 0x0a / 0x0009
>>> 00 01 00 0b 00 02 00 00 00                      |
>>> [Received Ack of type 0a, seq:  0]
>>> [Sending Ack of type 0a, seq: 3]
>>> Message received: 0x0a / 0x000a
>>> 01 74 00 0c 00 01 04 04 64 51                   |  t      dQ
>>> Received message type 0a
>>> RF level 100,000000
>>> Getting battery level...
>>> Message sent: 0x17 / 0x0006
>>> 00 01 00 0a 02 00                               |
>>> [Received Ack of type 17, seq:  1]
>>> [Sending Ack of type 17, seq: 4]
>>> Message received: 0x17 / 0x000a
>>> 01 36 00 0b 01 01 16 04 07 07                   |  6
>>> Received message type 17
>>> Battery level 100,000000
>>>
>>> Message sent: 0x19 / 0x0006
>>> 00 01 00 1f 01 00                               |
>>> [Received Ack of type 19, seq:  2]
>>> [Sending Ack of type 19, seq: 5]
>>> Message received: 0x19 / 0x005e
>>> 01 33 00 20 01 0b 05 08 01 00 00 01 00 01 05 08 |  3
>>> 02 00 00 01 00 01 05 08 03 00 00 01 00 01 05 08 |
>>> 04 00 00 01 00 01 05 08 05 00 00 01 00 02 05 08 |
>>> 06 00 00 0a 00 0a 05 08 07 00 00 0a 00 0a 05 08 |
>>> 08 00 00 03 00 03 05 08 09 00 00 1e 00 1e 05 08 |
>>> 0a 00 00 3f 00 04 05 08 0b 00 00 64 00 64       |    ?       d d
> Received message type 19
>>> Incoming clock!
>>> Message sent: 0x19 / 0x0006
>>> 00 01 00 19 00 02                               |
>>> [Received Ack of type 19, seq:  3]
>>> [Sending Ack of type 19, seq: 6]
>>> Message received: 0x19 / 0x0006
>>> 01 33 00 1a 09 00                               |  3
>>> Received message type 19
>>> Incoming clock!
>>> Getting network info ...
>>> Message sent: 0x0a / 0x0009
>>> 00 01 00 0b 00 02 00 00 00                      |
>>> [Received Ack of type 0a, seq:  4]
>>> [Sending Ack of type 0a, seq: 7]
>>> Message received: 0x0a / 0x000a
>>> 01 74 00 0c 00 01 04 04 64 50                   |  t      dP
>>> Received message type 0a
>>> RF level 100,000000
>>> Getting battery level...
>>> Message sent: 0x17 / 0x0006
>>> 00 01 00 0a 02 00                               |
>>> [Received Ack of type 17, seq:  5]
>>> [Sending Ack of type 17, seq: 0]
>>> Message received: 0x17 / 0x000a
>>> 01 36 00 0b 01 01 16 04 07 07                   |  6
>>> Received message type 17
>>> Battery level 100,000000
>>>
>>> Message sent: 0x19 / 0x0006
>>> 00 01 00 1f 01 00                               |
>>> [Received Ack of type 19, seq:  6]
>>> [Sending Ack of type 19, seq: 1]
>>> Message received: 0x19 / 0x005e
>>> 01 33 00 20 01 0b 05 08 01 00 00 01 00 01 05 08 |  3
>>> 02 00 00 01 00 01 05 08 03 00 00 01 00 01 05 08 |
>>> 04 00 00 01 00 01 05 08 05 00 00 01 00 02 05 08 |
>>> 06 00 00 0a 00 0a 05 08 07 00 00 0a 00 0a 05 08 |
>>> 08 00 00 03 00 03 05 08 09 00 00 1e 00 1e 05 08 |
>>> 0a 00 00 3f 00 04 05 08 0b 00 00 64 00 64       |    ?       d d
> Received message type 19
>>> Incoming clock!
>>> Message sent: 0x19 / 0x0006
>>> 00 01 00 19 00 02                               |
>>> [Received Ack of type 19, seq:  7]
>>> [Sending Ack of type 19, seq: 2]
>>> Message received: 0x19 / 0x0006
>>> 01 33 00 1a 09 00                               |  3
>>> Received message type 19
>>> Incoming clock!
>>> Getting network info ...
>>> Message sent: 0x0a / 0x0009
>>> 00 01 00 0b 00 02 00 00 00                      |
>>> [Received Ack of type 0a, seq:  0]
>>> [Sending Ack of type 0a, seq: 3]
>>> Message received: 0x0a / 0x000a
>>> 01 74 00 0c 00 01 04 04 64 50                   |  t      dP
>>> Received message type 0a
>>> RF level 100,000000
>>> Getting battery level...
>>> Message sent: 0x17 / 0x0006
>>> 00 01 00 0a 02 00                               |
>>> [Received Ack of type 17, seq:  1]
>>> [Sending Ack of type 17, seq: 4]
>>> Message received: 0x17 / 0x000a
>>> 01 36 00 0b 01 01 16 04 07 07                   |  6
>>> Received message type 17
>>> Battery level 100,000000
>>>
>>> Message sent: 0x19 / 0x0006
>>> 00 01 00 1f 01 00                               |
>>> [Received Ack of type 19, seq:  2]
>>> [Sending Ack of type 19, seq: 5]
>>> Message received: 0x19 / 0x005e
>>> 01 33 00 20 01 0b 05 08 01 00 00 01 00 01 05 08 |  3
>>> 02 00 00 01 00 01 05 08 03 00 00 01 00 01 05 08 |
>>> 04 00 00 01 00 01 05 08 05 00 00 01 00 02 05 08 |
>>> 06 00 00 0a 00 0a 05 08 07 00 00 0a 00 0a 05 08 |
>>> 08 00 00 03 00 03 05 08 09 00 00 1e 00 1e 05 08 |
>>> 0a 00 00 3f 00 04 05 08 0b 00 00 64 00 64       |    ?       d d
> Received message type 19
>>> Incoming clock!
>>> Message sent: 0x19 / 0x0006
>>> 00 01 00 19 00 02                               |
>>> [Received Ack of type 19, seq:  3]
>>> [Sending Ack of type 19, seq: 6]
>>> Message received: 0x19 / 0x0006
>>> 01 33 00 1a 09 00                               |  3
>>> Received message type 19
>>> Incoming clock!
>>> Getting network info ...
>>> Message sent: 0x0a / 0x0009
>>> 00 01 00 0b 00 02 00 00 00                      |
>>> [Received Ack of type 0a, seq:  4]
>>> [Sending Ack of type 0a, seq: 7]
>>> Message received: 0x0a / 0x000a
>>> 01 74 00 0c 00 01 04 04 64 50                   |  t      dP
>>> Received message type 0a
>>> RF level 100,000000
>>> Getting battery level...
>>> Message sent: 0x17 / 0x0006
>>> 00 01 00 0a 02 00                               |
>>> [Received Ack of type 17, seq:  5]
>>> [Sending Ack of type 17, seq: 0]
>>> Message received: 0x17 / 0x000a
>>> 01 36 00 0b 01 01 16 04 07 07                   |  6
>>> Received message type 17
>>> Battery level 100,000000
>>>
>>> Message sent: 0x19 / 0x0006
>>> 00 01 00 1f 01 00                               |
>>> [Received Ack of type 19, seq:  6]
>>> [Sending Ack of type 19, seq: 1]
>>> Message received: 0x19 / 0x005e
>>> 01 33 00 20 01 0b 05 08 01 00 00 01 00 01 05 08 |  3
>>> 02 00 00 01 00 01 05 08 03 00 00 01 00 01 05 08 |
>>> 04 00 00 01 00 01 05 08 05 00 00 01 00 02 05 08 |
>>> 06 00 00 0a 00 0a 05 08 07 00 00 0a 00 0a 05 08 |
>>> 08 00 00 03 00 03 05 08 09 00 00 1e 00 1e 05 08 |
>>> 0a 00 00 3f 00 04 05 08 0b 00 00 64 00 64       |    ?       d d
> Received message type 19
>>> Incoming clock!
>>> Message sent: 0x19 / 0x0006
>>> 00 01 00 19 00 02                               |
>>> [Received Ack of type 19, seq:  7]
>>> [Sending Ack of type 19, seq: 2]
>>> Message received: 0x19 / 0x0006
>>> 01 33 00 1a 09 00                               |  3
>>> Received message type 19
>>> Incoming clock!
>>> Getting network info ...
>>> Message sent: 0x0a / 0x0009
>>> 00 01 00 0b 00 02 00 00 00                      |
>>> [Received Ack of type 0a, seq:  0]
>>> [Sending Ack of type 0a, seq: 3]
>>> Message received: 0x0a / 0x000a
>>> 01 74 00 0c 00 01 04 04 64 50                   |  t      dP
>>> Received message type 0a
>>> RF level 100,000000
>>> Getting battery level...
>>> Message sent: 0x17 / 0x0006
>>> 00 01 00 0a 02 00                               |
>>> [Received Ack of type 17, seq:  1]
>>> [Sending Ack of type 17, seq: 4]
>>> Message received: 0x17 / 0x000a
>>> 01 36 00 0b 01 01 16 04 07 07                   |  6
>>> Received message type 17
>>> Battery level 100,000000
>>>
>>> Message sent: 0x19 / 0x0006
>>> 00 01 00 1f 01 00                               |
>>> [Received Ack of type 19, seq:  2]
>>> [Sending Ack of type 19, seq: 5]
>>> Message received: 0x19 / 0x005e
>>> 01 33 00 20 01 0b 05 08 01 00 00 01 00 01 05 08 |  3
>>> 02 00 00 01 00 01 05 08 03 00 00 01 00 01 05 08 |
>>> 04 00 00 01 00 01 05 08 05 00 00 01 00 02 05 08 |
>>> 06 00 00 0a 00 0a 05 08 07 00 00 0a 00 0a 05 08 |
>>> 08 00 00 03 00 03 05 08 09 00 00 1e 00 1e 05 08 |
>>> 0a 00 00 3f 00 04 05 08 0b 00 00 64 00 64       |    ?       d d
> Received message type 19
>>> Incoming clock!
>>>
>>>
>>> ...
>>>
>>>
>>>>
>>>>> Hi,
>>>>>
>>>>> On 10/18/07, Maarten Vanraes <address@hidden> wrote:
>>>>>> nokia 6021
>>>>>> model: RM-94
>>>>>>
>>>>>> the 6021 is listed in the 6150 driver (i've seen it in the code).
>>>>>
>>>>> 6510 driver.
>>>>
>>>> sorry typo
>>>>
>>>>>> the first time i used it with the cable, it worked, without any
> changes,
>>>>>> it took a long time to connect, (first tried a bunch of serial
> things) and
>>>>>> then it switched to FBUS and it worked, battery, signal level,
> etc... all
>>>>>> was fast.
>>>>>>
>>>>>> the second time i execute it, it takes less time to connect to it,
> it switches to FBUS quite fast, and it gets the model info and
> stuff, but
>>>>>> now
>>>>>> i can't see the battery level and signal level, and i get lotsa
> 'SM_Block
>>>>>> exting retry loop'.
>>>>>>
>>>>>> any ideas?
>>>>>
>>>>
>>>> config:
>>>> [global]
>>>>
>>>> port = /dev/ttyUSB0
>>>> model = 6510
>>>> initlength = default
>>>> connection = serial
>>>> use_locking = yes
>>>> serial_baudrate = 19200
>>>> smsc_timeout = 10
>>>>
>>>> [gnokiid]
>>>> bindir = /usr/sbin/
>>>>
>>>> [connect_script]
>>>> TELEPHONE = 12345678
>>>> [disconnect_script]
>>>>
>>>> [logging]
>>>>
>>>> debug = on
>>>> rlpdebug = on
>>>> xdebug = off
>>>>
>>>>
>>>> log from xgnokii with the phone connected through the USB cable:
>>>>
>>>> address@hidden ~]$ xgnokii
>>>> LOG: debug mask is 0x1
>>>> LOG: rlpdebug mask is 0x1
>>>>
>>>> (xgnokii:2817): Gtk-WARNING **: horizontal scrolling not implemented
>>>>
>>>> (xgnokii:2817): Gtk-WARNING **: horizontal scrolling not implemented
> phone instance config:
>>>> model: 6510
>>>> port_device: /dev/ttyUSB0
>>>> connection_type: 0
>>>> init_length: 0
>>>> serial_baudrate: 19200
>>>> serial_write_usleep: -1
>>>> hardware_handshake: 0
>>>> require_dcd: 0
>>>> smsc_timeout: 100
>>>> connect_script:
>>>> disconnect_script:
>>>> rfcomm_cn: 1
>>>> sm_retry: off
>>>> Connecting
>>>> Serial device: opening device /dev/ttyUSB0
>>>> Serial device: setting speed to 115200
>>>> Serial device: setting RTS to low and DTR to low
>>>> Getting model...
>>>> Message sent: 0x1b / 0x0006
>>>> 00 01 00 07 01 00                               |
>>>> [Received Ack of type 1b, seq: 80]
>>>> Message sent: 0x1b / 0x0006
>>>> 00 01 00 07 01 00                               |
>>>> [Received Ack of type 1b, seq:  1]
>>>> [Sending Ack of type 1b, seq: 7]
>>>> Message received: 0x1b / 0x0032
>>>> 01 39 00 08 00 01 58 2c 00 26 56 20 30 34 2e 39 |  9    X, &V 04.9 30
> 0a 30 39 2d 30 35 2d 30 36 0a 52 4d 2d 39 34 | 0 09-05-06 RM-94 0a 28 63
> 29 20 4e 6f 6b 69 61 2e 20 20 0a 43 00 |  (c) Nokia.   C 00 00
>                                      |
>>>> Received message type 1b
>>>> model length: 5
>>>> Received model RM-94
>>>> Identifying...
>>>> Message sent: 0x1b / 0x0005
>>>> 00 01 00 00 41                                  |     A
>>>> Message sent: 0x1b / 0x0006
>>>> 00 01 00 07 01 00                               |
>>>> [Received Ack of type 1b, seq:  2]
>>>> [Received Ack of type 1b, seq:  3]
>>>> [Sending Ack of type 1b, seq: 0]
>>>> Message received: 0x1b / 0x001a
>>>> 01 39 00 01 00 01 41 14 00 10 33 35 34 38 33 38 |  9    A   354838 30
> 31 38 36 38 33 31 38 30 00                   | 018683180
>>>> Received message type 1b
>>>> Received imei 354838018683180
>>>> [Sending Ack of type 1b, seq: 1]
>>>> Message received: 0x1b / 0x0032
>>>> 01 39 00 08 00 01 58 2c 00 26 56 20 30 34 2e 39 |  9    X, &V 04.9 30
> 0a 30 39 2d 30 35 2d 30 36 0a 52 4d 2d 39 34 | 0 09-05-06 RM-94 0a 28 63
> 29 20 4e 6f 6b 69 61 2e 20 20 0a 43 00 |  (c) Nokia.   C 00 00
>                                      |
>>>> Received message type 1b
>>>> Received revision V 04.90
>>>> model length: 5
>>>> Received model RM-94
>>>> Found model "RM-94"
>>>> Found model "RM-94"
>>>> Getting network info ...
>>>> Message sent: 0x0a / 0x0009
>>>> 00 01 00 0b 00 02 00 00 00                      |
>>>> SM_Block: exiting the retry loop
>>>> Message sent: 0x0a / 0x0009
>>>> 00 01 00 0b 00 02 00 00 00                      |
>>>> SM_Block: exiting the retry loop
>>>> Message sent: 0x0a / 0x0009
>>>> 00 01 00 0b 00 02 00 00 00                      |
>>>> SM_Block: exiting the retry loop
>>>> Getting battery level...
>>>> Message sent: 0x17 / 0x0006
>>>> 00 01 00 0a 02 00                               |
>>>> SM_Block: exiting the retry loop
>>>> Message sent: 0x17 / 0x0006
>>>> 00 01 00 0a 02 00                               |
>>>> SM_Block: exiting the retry loop
>>>> Message sent: 0x17 / 0x0006
>>>> 00 01 00 0a 02 00                               |
>>>> SM_Block: exiting the retry loop
>>>> Message sent: 0x19 / 0x0006
>>>> 00 01 00 1f 01 00                               |
>>>> SM_Block: exiting the retry loop
>>>> Message sent: 0x19 / 0x0006
>>>> 00 01 00 1f 01 00                               |
>>>> SM_Block: exiting the retry loop
>>>> Message sent: 0x19 / 0x0006
>>>> 00 01 00 1f 01 00                               |
>>>> SM_Block: exiting the retry loop
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> gnokii-users mailing list
>>>> address@hidden
>>>> http://lists.nongnu.org/mailman/listinfo/gnokii-users
>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> gnokii-users mailing list
>>> address@hidden
>>> http://lists.nongnu.org/mailman/listinfo/gnokii-users
>>>
>>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> gnokii-users mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/gnokii-users
>>
>>
>
>
>
>
>
>
>
>
>
>
> --
> Alien is my name and head-biting is my game.
>
>
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gnokii-users
>
>
reply via email to
[Prev in Thread] Current Thread [Next in Thread]