[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up
From: |
Eric S. Raymond |
Subject: |
Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up |
Date: |
Sun, 29 May 2016 08:09:20 -0400 |
User-agent: |
Mutt/1.5.23 (2014-03-12) |
Hal, I folded in most of your siuggestions directly. A note about one:
Hal Murray <address@hidden>:
> "You can choose to configure the SBC to use a fixed, static IP address.."
>
> The whole goal was to setup a NTP server. How are you going to use it
> without a static IP Address? (We could discuss that, but you probably don't
> want to go down that rathole.)
One of the HOWTO's premises is that you have zeroconf. If you're only going
to use it on your LAN, not make it public, you can get away with giving
a .local address in your other configs. I'll add a clarification.
--
<a href="http://www.catb.org/~esr/">Eric S. Raymond</a>
- [gpsd-dev] PPS over USB, (continued)
Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up, Mike, 2016/05/22
Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up, Hal Murray, 2016/05/20
Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up, Hal Murray, 2016/05/24
- Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up,
Eric S. Raymond <=
Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up, Eric S. Raymond, 2016/05/29