[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up
From: |
Hal Murray |
Subject: |
Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up |
Date: |
Sun, 29 May 2016 07:28:06 -0700 |
address@hidden said:
> One of the HOWTO's premises is that you have zeroconf. If you're only going
> to use it on your LAN, not make it public, you can get away with giving a
> .local address in your other configs. I'll add a clarification.
I thought part of the goal was to get more pool servers. That needs a fixed IP
Address.
I thought you avoided needing zeroconf by requiring a display and kbd on the
SBC.
If you are assuming zeroconf, I think that should be pointed out very early.
Are there any other assumptions that might not be obvious?
--
These are my opinions. I hate spam.
- Re: [gpsd-dev] PPS over USB, (continued)
Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up, Mike, 2016/05/22
Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up, Hal Murray, 2016/05/20
Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up, Hal Murray, 2016/05/24
Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up, Eric S. Raymond, 2016/05/29