[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Help-gnu-radius] Radius Not responding
From: |
Bob Robichaud |
Subject: |
Re: [Help-gnu-radius] Radius Not responding |
Date: |
Tue, 23 Sep 2003 15:00:59 -0400 |
Our users file is very large and came from old old radius running MERIT
radius
This is what the users file looks like
joe Authentication-Type="Unix-PW"
Framed-Protocol = PPP,
Framed-IP-Address = 255.255.255.254,
Framed-IP-Netmask = 255.255.255.0,
Framed-Routing =Broadcast-Listen,
Framed-MTU = 1500,
Framed-Compression = Van-Jacobson-TCP-IP
I had to add an Attribute to dictionary hoping it would work
Authentication-Type 1027 integer -[L--R-R]
VALUE Authentication-Type Unix-PW 1
I could try using Auth-Type and System in my users file but for some reason
I thought Authentication-Type was needed for Shiva Lan Rover.
> > My question is would Maximum number of children active cause the error
> > Invalid user [joe], CLID unknown
>
> No. What do you have your users file set to authenticate off of? If it is
> the system password file there is no user joe that radius can see. If you
> are authenticating from a database, radius did not find an entry with the
> Username joe. Radius gives a different error for wrong password (which
> tells you what the wrong password is.) The only thing you have to do now
> is add user joe to whatever you are authenticating off of in the users
> file.
>
> Add this to your users file to confirm all works for a quick test:
>
> joe Password = "testing",
> Simultaneous-Use = 1
> Service-Type = Framed-User,
> Framed-Protocol = PPP
>
> I bet with that in there the Shiva will authenticate user joe with
> password testing.
>
> Gerald
>