RE: mxe octave filure(Was Re: GraphicsMagick 16bit on windows)

[JohnD]

> -----Original Message-----
> From: Tatsuro MATSUOKA [mailto:address@hidden
> Sent: Tuesday, July 07, 2015 6:47 AM
> To: JohnD; address@hidden
> Subject: Re: mxe octave filure(Was Re: GraphicsMagick 16bit on windows)
> 
>  >>  After octave build, I have met an error.
> >>  $ LANG=C make tar-dist
> >>  make: *** No rule to make target '/c/usr/Tatsu/msys2_mingw32/mxe-
> >>  octave32/mxe-octave/installed-packages/build-gcc', needed by
> >>  '/c/usr/Tatsu/msys2_mingw32/mxe-octave32/mxe-octave/installed-
> >>  packages/mpfr'.  Stop.
> >>
> >>  For mingw mxe build gcc was not build so that this kind of thing
> > corrected.
> >>  This build was started on June 20. ItS \s old.
> >>
> >>  If I freshly re-start mxe-build, is this issue solved?
> >>
> >
> > In src/cloog.mk, isl.mk, mpc.mk and mfpr.mk, remove 'build-gcc' from
> > PKG_DEPS It shouldn’t need it - even for notmal cross mingw buid.
> 
> 
> 
> I have deleted 'build-gcc' in src/cloog.mk, isl.mk, mpc.mk and mfpr.mk.
> And resume the make.
> 
> In building mpfr,
> libtool: link: gcc -std=gnu99 -shared  .libs/exceptions.o .libs/extract.o
> .libs/uceil_exp2.o .libs/uceil_log2.o .libs/ufloor_log2.o .libs/add.o 
> .libs/add1.o
> .libs/add_ui.o .libs/agm.o .libs/clear.o .libs/cmp.o .libs/cmp_abs.o
> .libs/cmp_si.o .libs/cmp_ui.o .libs/comparisons.o .libs/div_2exp.o 
> .libs/div_2si.o
> .libs/div_2ui.o .libs/div.o .libs/div_ui.o .libs/dump.o .libs/eq.o 
> .libs/exp10.o
> .libs/exp2.o .libs/exp3.o .libs/exp.o .libs/frac.o .libs/frexp.o .libs/get_d.o
> .libs/get_exp.o .libs/get_str.o .libs/init.o .libs/inp_str.o .libs/isinteger.o
> .libs/isinf.o .libs/isnan.o .libs/isnum.o .libs/const_log2.o .libs/log.o 
> .libs/modf.o
> .libs/mul_2exp.o .libs/mul_2si.o .libs/mul_2ui.o .libs/mul.o .libs/mul_ui.o
> .libs/neg.o .libs/next.o .libs/out_str.o .libs/printf.o .libs/vasprintf.o
> .libs/const_pi.o .libs/pow.o .libs/pow_si.o .libs/pow_ui.o .libs/print_raw.o
> .libs/print_rnd_mode.o .libs/reldiff.o .libs/round_prec.o .libs/set.o
> .libs/setmax.o .libs/setmin.o
> .libs/set_d.o .libs/set_dfl_prec.o .libs/set_exp.o .libs/set_rnd.o 
> .libs/set_f.o
> .libs/set_prc_raw.o .libs/set_prec.o .libs/set_q.o .libs/set_si.o 
> .libs/set_str.o
> .libs/set_str_raw.o .libs/set_ui.o .libs/set_z.o .libs/sqrt.o .libs/sqrt_ui.o
> .libs/sub.o .libs/sub1.o .libs/sub_ui.o .libs/rint.o .libs/ui_div.o 
> .libs/ui_sub.o
> .libs/urandom.o .libs/urandomb.o .libs/get_z_exp.o .libs/swap.o 
> .libs/factorial.o
> .libs/cosh.o .libs/sinh.o .libs/tanh.o .libs/sinh_cosh.o .libs/acosh.o 
> .libs/asinh.o
> .libs/atanh.o .libs/atan.o .libs/cmp2.o .libs/exp_2.o .libs/asin.o
> .libs/const_euler.o .libs/cos.o .libs/sin.o .libs/tan.o .libs/fma.o 
> .libs/fms.o
> .libs/hypot.o .libs/log1p.o .libs/expm1.o .libs/log2.o .libs/log10.o 
> .libs/ui_pow.o
> .libs/ui_pow_ui.o .libs/minmax.o .libs/dim.o .libs/signbit.o .libs/copysign.o
> .libs/setsign.o .libs/gmp_op.o .libs/init2.o .libs/acos.o .libs/sin_cos.o
> .libs/set_nan.o .libs/set_inf.o .libs/set_zero.o .libs/powerof2.o 
> .libs/gamma.o
> .libs/set_ld.o .libs/get_ld.o .libs/cbrt.o .libs/volatile.o 
> .libs/fits_sshort.o
> .libs/fits_sint.o .libs/fits_slong.o .libs/fits_ushort.o .libs/fits_uint.o
> .libs/fits_ulong.o .libs/fits_uintmax.o .libs/fits_intmax.o .libs/get_si.o
> .libs/get_ui.o .libs/zeta.o .libs/cmp_d.o .libs/erf.o .libs/inits.o 
> .libs/inits2.o
> .libs/clears.o .libs/sgn.o .libs/check.o .libs/sub1sp.o .libs/version.o
> .libs/mpn_exp.o .libs/mpfr-gmp.o .libs/mp_clz_tab.o .libs/sum.o .libs/add1sp.o
> .libs/free_cache.o .libs/si_op.o .libs/cmp_ld.o .libs/set_ui_2exp.o
> .libs/set_si_2exp.o .libs/set_uj.o .libs/set_sj.o .libs/get_sj.o 
> .libs/get_uj.o
> .libs/get_z.o .libs/iszero.o .libs/cache.o .libs/sqr.o .libs/int_ceil_log2.o
> .libs/isqrt.o .libs/strtofr.o .libs/pow_z.o .libs/logging.o .libs/mulders.o
> .libs/get_f.o .libs/round_p.o .libs/erfc.o .libs/atan2.o .libs/subnormal.o
> .libs/const_catalan.o .libs/root.o .libs/sec.o .libs/csc.o .libs/cot.o 
> .libs/eint.o
> .libs/sech.o .libs/csch.o .libs/coth.o
> .libs/round_near_x.o .libs/constant.o .libs/abort_prec_max.o
> .libs/stack_interface.o .libs/lngamma.o .libs/zeta_ui.o .libs/set_d64.o
> .libs/get_d64.o .libs/jn.o .libs/yn.o .libs/rem1.o .libs/get_patches.o
> .libs/add_d.o .libs/sub_d.o .libs/d_sub.o .libs/mul_d.o .libs/div_d.o 
> .libs/d_div.o
> .libs/li2.o .libs/rec_sqrt.o .libs/min_prec.o .libs/buildopt.o .libs/digamma.o
> .libs/bernoulli.o .libs/isregular.o .libs/set_flt.o .libs/get_flt.o 
> .libs/scale2.o
> .libs/set_z_exp.o .libs/ai.o .libs/gammaonethird.o .libs/grandom.o   -lgmp  
> -m32
> -O2 -mtune=pentiumpro -march=pentiumpro -Wl,--output-def -Wl,.libs/libmpfr-
> 4.dll.def   -o .libs/libmpfr-4.dll -Wl,--enable-auto-image-base -Xlinker 
> --out-
> implib -Xlinker .libs/libmpfr.dll.a
> C:/msys64/mingw32/lib/gcc/i686-w64-mingw32/4.9.2/../../../../i686-w64-
> mingw32/bin/ld.exe: cannot find -lgmp
> collect2.exe: error: ld returned 1 exit status
> Makefile:431: recipe for target 'libmpfr.la' failed
> make[4]: *** [libmpfr.la] Error 1
> 
> In mxe-octave/usr/lib, libgmp.dll.a exists.
> 
> In mpfr.mk,
>         --with-gmp-lib='$(HOST_LIBDIR)'
> 
> Does HOST_LIBDIR should be added?
> 
> Tatsuro

What is toy mxe-configure options, and what make are doing? Just make? Or make 
nsis-installer?