[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Ltib] LPC3250: u-boot hangs
From: |
Kevin Wells |
Subject: |
RE: [Ltib] LPC3250: u-boot hangs |
Date: |
Tue, 28 Jul 2009 20:17:41 +0200 |
Hi Dimitri,
There seems to be an issue when u-boot does a saveenv() after booting from
FLASH.
We'll look at it and fix it in the next u-boot patch, but for now, just use SD
boot
and leave the card in the system.
S1l autoboot setup for u-boot.bin form the SD card is..
"aboot blk u-boot.bin raw 0x83fc0000"
thanks,
Kevin
> -----Original Message-----
> From: address@hidden [mailto:ltib-
> address@hidden On Behalf Of Dmitry Vinokurov
> Sent: Monday, July 27, 2009 10:23 PM
> To: address@hidden
> Subject: [Ltib] LPC3250: u-boot hangs
>
> Hello,
>
> I installed u-boot from SD card on RDK LPC3250 as it described in
> "Phytec LPC3250 QuickStart BSP Linux":
> /*
> linux>load blk u-boot.bin raw 0x83fc0000
> File loaded successfully
>
> linux>nsave
>
> linux>aboot flash raw 0x83fc0000
> Autoboot configuration updated
> */
>
> Then if I enter boot command everything is fine, u-boot works.
>
> But after reboot I get following output:
> /*
> Phytec LPC3250 board
> Build date: Oct 29 2008 15:42:39
> Autoboot in progress, press any key to stop
>
>
> U-Boot 2009.03-rc1 (Jul 14 2009 - 10:32:03)
>
> DRAM: 64 MB
> NAND: 64 MiB
> */
>
> Then board hangs without any messages.
>
> Any ideas?
>
> Thanks in advance.
>
> P.S.: last cvs version of LTIB and u-boot 2009.03-rc1.
>
> --
> Best Regards,
> Dmitry Vinokurov
> <address@hidden>
>
>
>
> _______________________________________________
> LTIB home page: http://ltib.org
>
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib