[Ltib] LPC3250: u-boot hangs

[Dmitry Vinokurov]

Hello,

I installed u-boot from SD card on RDK LPC3250 as it described in 
"Phytec LPC3250 QuickStart BSP Linux":
/*
linux>load blk u-boot.bin raw 0x83fc0000
File loaded successfully

linux>nsave

linux>aboot flash raw 0x83fc0000
Autoboot configuration updated
*/

Then if I enter boot command everything is fine, u-boot works.

But after reboot I get following output:
/*
Phytec LPC3250 board
Build date: Oct 29 2008 15:42:39
Autoboot in progress, press any key to stop


U-Boot 2009.03-rc1 (Jul 14 2009 - 10:32:03)

DRAM:  64 MB
NAND:  64 MiB
*/

Then board hangs without any messages.

Any ideas?

Thanks in advance.

P.S.: last cvs version of LTIB and u-boot 2009.03-rc1.

--
Best Regards, 
Dmitry Vinokurov 
<address@hidden>