[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE : RE : [lwip-users] Messages
From: |
VANSTAEN Laurent RD-MAPS-GRE |
Subject: |
RE : RE : [lwip-users] Messages |
Date: |
Mon, 13 Sep 2004 14:14:10 +0200 |
Hi all,
I've traced the messages I send to the server, I have an Hexa display of
these messages but where can I find the valid Hexa frame for a Confack message
(for exemple) ? I've tried the PPP RFC 1661 but there's not the level of detail
I am looking for. I would really like to see the entire frame in hexa, to
compare with mine and see if I missed an option or something.
thanks,
Laurent Vanstaen
-----Message d'origine-----
De : address@hidden [mailto:address@hidden De la part de VANSTAEN Laurent
RD-MAPS
Envoyé : mardi 7 septembre 2004 09:13
À : Mailing list for lwIP users
Objet : RE : [lwip-users] Messages
The problem is that I try to connect to a GPRS APN (Orange) using PPP, so I
cannot configure the server side. It seems that this APN wants to use Protocol
Field Compression and Address/Control Field Compression. Does LWIP PPP support
these options ? I think so but I'm not sure.
-----Message d'origine-----
De : address@hidden [mailto:address@hidden De la part de Craig Graham Envoyé :
lundi 6 septembre 2004 19:43 À : Mailing list for lwIP users Objet : Re:
[lwip-users] Messages
I saw that happen when directly connecting to a PPP server on my linux box
(via a serial lead). It's appears to be caused by bad handling of unsupported
compression options during the PPP setup phase (the solution I used was to
disable those compression schemes at the server end).
On Monday 06 September 2004 13:47, VANSTAEN Laurent RD-MAPS-GRE wrote:
> Hi,
> I still have a problem with GPRS, PPP and LWIP. My peer sends a
> first Configure-Request Packets, then receives a Configure-Request as
> an answer, and sends back a Configure-Request-Ack. And that scheme
> occurs 3 or 4 times before I get a NO CARRIER message (the other peer
> got bored and went away I think). Why do I keep receiving
> Configure-Request ? I should receive a "Receive-Configure-Request",
> good or bad, packet, but I don't .... Does someone know what it means
> ?
>
> Thanks,
>
> Laurent Vanstaen
_______________________________________________
lwip-users mailing list
address@hidden http://lists.nongnu.org/mailman/listinfo/lwip-users
_______________________________________________
lwip-users mailing list
address@hidden http://lists.nongnu.org/mailman/listinfo/lwip-users
- RE : RE : [lwip-users] Messages,
VANSTAEN Laurent RD-MAPS-GRE <=