Re: problem with docs (Was: make check?)

[Tatsuro MATSUOKA]

----- Original Message -----

> From: Ben Abbott 
> To: Octave Maintainers List ; Mike Miller 
> Cc: 
> Date: 2016/7/11, Mon 10:25
> Subject: Re: problem with docs (Was: make check?)
> 
> 
>>  On Jul 10, 2016, at 8:33 PM, Ben Abbott <address@hidden> wrote:
>> 
>>>  On Jul 10, 2016, at 8:09 AM, Ben Abbott <address@hidden> wrote:
>>> 
>>>  I tried “make check” for the default branch and encountered the error 
> below.
>>> 
>>>  warning: docstring file 
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
>>>  error: no such file, 
> '/Users/bpabbott/Development/mercurial/default/build/test/--no-init-path'
>>>  error: source: error sourcing file 
> '/Users/bpabbott/Development/mercurial/default/build/test/--no-init-path'
>>>  error: execution exception in --no-init-path
>>> 
>>>  Is anyone else seeing this?
>>> 
>>>  $ hg tip
>>>  pulling from /Users/bpabbott/Development/mercurial/octave
>>>  searching for changes
>>>  no changes found
>>>  changeset:   22081:a5a99a830c8c
>>>  bookmark:    @
>>>  tag:         tip
>>>  user:        Mike Miller <address@hidden>
>>>  date:        Thu Jul 07 13:55:37 2016 -0700
>>>  summary:     Set default floating point unit state when initializing 
> the interpreter (bug #48418)
>>> 
>>>  Ben
>> 
>>  Ok. My mistake. It’s not “make check” that fails. I’m just no longer able 
> to build the docs.
>> 
>>  I suspect a problem with the changeset below.
>> 
>>      http://hg.savannah.gnu.org/hgweb/octave/rev/df50d42d4b1b
>> 
>>  I’m not building in the source tree, but have started a build to see if 
> that works.
>> 
>>  The warnings/errors I see are below. 
>> 
>>   GEN      doc/interpreter/voronoi.txt
>>  warning: docstring file 
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
>>  error: no such file, 
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>>  error: source: error sourcing file 
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>>  error: execution exception in --no-init-path
>> 
>>  <snip> </snip>
>> 
>>   GEN      doc/interpreter/plot-uitoggletoolproperties.texi
>>  warning: docstring file 
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
>>  error: no such file, 
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>>  error: source: error sourcing file 
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>>  error: execution exception in --no-init-path
>> 
>>  <snip> </snip>
>> 
>>   MAKEINFO ../sources/doc/interpreter/octave.info
>>  doc/interpreter/plot.texi:102: warning: could not find @image file 
> `plot.txt' nor alternate text
>>  doc/interpreter/plot.texi:422: warning: could not find @image file 
> `hist.txt' nor alternate text
>>  doc/interpreter/plot.texi:1308: warning: could not find @image file 
> `errorbar.txt' nor alternate text
>>  doc/interpreter/plot.texi:1576: warning: could not find @image file 
> `polar.txt' nor alternate text
>>  doc/interpreter/plot.texi:2577: warning: could not find @image file 
> `mesh.txt' nor alternate text
>>  doc/interpreter/plot.texi:2600: warning: could not find @image file 
> `plot3.txt' nor alternate text
>>  doc/interpreter/sparse.texi:671: warning: could not find @image file 
> `spmatrix.txt' nor alternate text
>>  doc/interpreter/sparse.texi:1052: warning: could not find @image file 
> `spmatrix.txt' nor alternate text
>>  doc/interpreter/sparse.texi:1104: warning: could not find @image file 
> `spchol.txt' nor alternate text
>>  doc/interpreter/sparse.texi:1109: warning: could not find @image file 
> `spcholperm.txt' nor alternate text
>> 
>>  <snip> </snip>
>> 
>>   GEN      doc/interpreter/doc-cache
>>  warning: docstring file 
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
>>  error: no such file, 
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>>  error: source: error sourcing file 
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>>  error: execution exception in --no-init-path
>> 
>>  <snip> </snip>
>> 
>>   GEN      doc/interpreter/voronoi.eps
>>  warning: docstring file 
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
>>  error: no such file, 
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>>  error: source: error sourcing file 
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>>  error: execution exception in --no-init-path
>> 
>>  <snip> </snip>
>> 
>>   GEN      doc/interpreter/splinefit6.eps
>>  warning: docstring file 
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
>>  error: no such file, 
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>>  error: source: error sourcing file 
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>>  error: execution exception in --no-init-path
>>   TEXI2DVI doc/interpreter/octave.dvi
>>  /sw/bin/texi2dvi: etex exited with bad status, quitting.
>>  Makefile:27464: recipe for target 'doc/interpreter/octave.dvi’ failed
>> 
>>  Ben
> 
> lol, I tried building in the source tree. The result has the same errors as 
> before and some a new “feature”.
> 
>   GEN      doc/interpreter/triplot.txt
> wwaarrnniinngg::  ddooccssttrriinngg  ffiillee  
> ''//ssww//llooccaall//sshhaarree//ooccttaavvee//44..11..00++//eettcc//bbuuiilltt--iinn--ddooccssttrriinnggss''
>   
> nnoott  ffoouunndd
> 
> eerrrroorr::  nnoo  ssuucchh  ffiillee,,  
> ''//UUsseerrss//bbppaabbbbootttt//DDeevveellooppmmeenntt//mmeerrccuurriiaall//ddeeffaauulltt//ssoouurrcceess//----nnoo--iinniitt--ppaatthh''
> 
> eerrrroorr::  ssoouurrccee::  eerrrroorr  ssoouurrcciinngg  ffiillee  
> ''//UUsseerrss//bbppaabbbbootttt//DDeevveellooppmmeenntt//mmeerrccuurriiaall//ddeeffaauulltt//ssoouurrcceess//----nnoo--iinniitt--ppaatthh''
> 
> eerrrroorr::  eexxeeccuuttiioonn  eexxcceeppttiioonn  iinn  
> ----nnoo--iinniitt--ppaatthh
> 
>   GEN      doc/interpreter/griddata.txt
>   GEN      doc/interpreter/convhull.txt
> warning: docstring file 
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
> error: no such file, 
> '/Users/bpabbott/Development/mercurial/default/sources/--no-init-path'
> error: source: error sourcing file 
> '/Users/bpabbott/Development/mercurial/default/sources/--no-init-path'
> error: execution exception in --no-init-path
> warning: docstring file 
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
> error: no such file, 
> '/Users/bpabbott/Development/mercurial/default/sources/--no-init-path'
> error: source: error sourcing file 
> '/Users/bpabbott/Development/mercurial/default/sources/--no-init-path'
> error: execution exception in --no-init-path
> 
> Ben


I have pulled and updated the hg clone in my ubuntu 14.04 PC (amd64), 
and bootstrap, re-configure and make.

All build process including make documents went well.
Revision   :   22084:79ee6df71b51
bookmark   : @
tag        :         tip
user       :       Mike Miller <address@hidden>
date       :         Sun Jul 10 11:02:44 2016 -0700
file       :     liboctave/wrappers/fpucw-wrappers.c
explanation:
Fix compilation error in fpucw-wrappers.c on non-x86 systems

* fpucw-wrappers.c (octave_begin_long_double_rounding): Declare the oldcw
variable used by BEGIN_LONG_DOUBLE_ROUNDING unconditionally since its value
is returned unconditionally.

   HG ID for this build is "79ee6df71b51"

Tatsuro