[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] Affecting LED3 in YAPA2
From: |
Felix Ruess |
Subject: |
Re: [Paparazzi-devel] Affecting LED3 in YAPA2 |
Date: |
Mon, 5 Dec 2011 19:38:43 +0100 |
Hi,
Well, it's a bit hard to do both with the same led.
E.g. if you send something via telemetry you don't know if it's
actually received on the ground and that doesn't say anything if you
are currently receiving datalink messages.
So first you have to decide what behaviour exactly you want. Blink
when something is transmitted to the ground, blink when something is
received?
Or led on if the last datalink message received is less than x seconds old...?
That is not added so far, but is easily done.
(Well, LED(3) actually blinks if you use radio control via datalink
and you receive a message... that should made configurable anyway...)
Cheers, Felix
On Mon, Dec 5, 2011 at 7:03 PM, limaiem imed <address@hidden> wrote:
> Hi Felix,
>
> both if possible,
>
> should I program it ? or are there something done ?
>
> thanks a lot
>
>
>
> Imed LIMAIEM
> address@hidden
>
>
>
> On Mon, Dec 5, 2011 at 7:00 PM, Felix Ruess <address@hidden> wrote:
>>
>> Hi Imed,
>>
>> what exactly do you want to use the LED for? Blink when you receive,
>> or send a message? Or both?
>> Or do you want to indicate datalink status?
>>
>> Cheers, Felix
>>
>> On Sun, Dec 4, 2011 at 7:16 PM, limaiem imed <address@hidden> wrote:
>> > Hi all,
>> >
>> > I would Like to use the 3rd LED on YAPA2 Board for the Xbee Telemetry.
>> >
>> > The LED1 is affected to general processor time: -DTIME_LED=1
>> > The LED2 to the GPS throughout: -DGPS_LED=2
>> >
>> > Since the Telemetry is on the serial UART1 port, I searched for strings
>> > like
>> > ($)_LED in the whole code but found nothing related to UART1 port ...
>> >
>> > Some one can help ?
>> >
>> > Regards,
>> >
>> > Imed LIMAIEM
>> > address@hidden
>> >
>> >
>> > _______________________________________________
>> > Paparazzi-devel mailing list
>> > address@hidden
>> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
- [Paparazzi-devel] Affecting LED3 in YAPA2, limaiem imed, 2011/12/04
- Re: [Paparazzi-devel] Affecting LED3 in YAPA2, Felix Ruess, 2011/12/05
- Re: [Paparazzi-devel] Affecting LED3 in YAPA2, limaiem imed, 2011/12/05
- Re: [Paparazzi-devel] Affecting LED3 in YAPA2,
Felix Ruess <=
- Re: [Paparazzi-devel] Affecting LED3 in YAPA2, limaiem imed, 2011/12/05
- Re: [Paparazzi-devel] Affecting LED3 in YAPA2, Felix Ruess, 2011/12/05
- Re: [Paparazzi-devel] Affecting LED3 in YAPA2, limaiem imed, 2011/12/05
- Re: [Paparazzi-devel] Affecting LED3 in YAPA2, Felix Ruess, 2011/12/05
- Re: [Paparazzi-devel] Affecting LED3 in YAPA2, limaiem imed, 2011/12/05