Hi Eric,
please run ./paparazzi_version in the Paparazzi directory and provide the
exact version it outputs.
E.g. I tested with v4.9_devel-311-g9ec9a92
On which version did it work?
And I guess you accidentally provided the wrong airframe file, that one is
for a tiny0.99 with IR sensors...
Cheers, Felix
On Thu, Dec 6, 2012 at 9:43 AM, <address@hidden> wrote:
Hi
felix,thank for your many many... help
I use the V4.9 from the week begining...
I hope to fly tomorow..
the join file was good (for the bat problem) few weeks ago ..
Regards,
Eric
Felix Ruess <address@hidden> a écrit :
Hi Eric,
can you please provide some more details?
Which exact paparazzi_version are you using? Can you post your airframe
file?
I just checked with my Lisa/L 1.0 and the bat voltage follows my input
voltage just fine..
Cheers, Felix
On Wed, Dec 5, 2012 at 7:24 PM, <address@hidden> wrote:
Hi,
Now I can compile on lisaL and booz....
On LisaL, I havea problem with the BAT on the ground station.
The ADC0 (pin14) really move (oscilloscope), the CPU has been changed...
On the PC the value of BAT (lab psu) it change on boot, but still stable
untill I reboot LisaL..
After the boot, I can do anythink with my PSU, the ground station still
on
the boot value...
regards,
Eric
______________________________****_________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/****mailman/listinfo/paparazzi-****devel<https://lists.nongnu.org/**mailman/listinfo/paparazzi-**devel>
<https://lists.nongnu.**org/mailman/listinfo/**paparazzi-devel<https://lists.nongnu.org/mailman/listinfo/paparazzi-devel>
>
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel