Re: [Partysip-dev] libosip-0.8.8 and partysip-0.4.5 major release!

[Aymeric Moizard]

On Thu, 27 Jun 2002, Tim Na wrote:

> Great job! About Solaris, we recently upgade it to Solaris 8 and
> partysip is workin fine with the new CVS version. I have been a bit
> busy with implementing a simple plugin for IM service.

Great! Give me news about it...

> So far so good :-)
> If I see a problem, I will report it.
> oh BTW, gethostbyname_r() detection is not still working.  I will try to
> look into it later. :-)

Can you send the file config.cache and config.status and config.log?

Not a big deal, anyway!
I think I'll keep the define as it is and this should work for ever:
#if defined(_OSF_SOURCE)||defined(HAVE_FUNC_GETHOSTBYNAME_R_3)
 ...
#elif defined(__sun__)||defined(HAVE_FUNC_GETHOSTBYNAME_R_5)
 ...
#elif defined(HAVE_FUNC_GETHOSTBYNAME_R_6) /* linux */

#else
 #error ....
#endif

> Thanks.
>
> Regards,
> Tim Na
>
> Samsung Electornics.
> Mobile Telecommunication Department.
> ----- Original Message -----
> From: "Aymeric Moizard" <address@hidden>
> To: <address@hidden>; <address@hidden>; <address@hidden>
> Sent: Wednesday, June 26, 2002 8:36 PM
> Subject: [Partysip-dev] libosip-0.8.8 and partysip-0.4.5 major release!
>
>
> >
> > I'm finally there!
> > I worked the past week on the windows port of partysip.
> > (the ppl/win32 replaces the ppl/unix library). It's now
> > running fine on *linux*, *OpenBSD*, and *windows*. (I need some
> > people to validate the solaris and osf ports, please test it
> > and send a report!)
> >
> > About oSIP:
> >
> > Working for the first time on windows, I have to warn user of
> > previous version of oSIP that they should get a lot of trouble!!
> > The contributions that I get on year ago is just plain wrong!
> > The method sthread_join(), instead of waiting for thread to
> > terminate just kill them even if they are unfinished!
> >
> > I suppose that windows users experienced some troubles... :)
> > From now on, I will try to maintain and validate myself the windows
> > port... :(
> >
> > About Partysip:
> >
> > Partysip has reached its first step of developpement:
> > * registrar capability.
> > * redirect/stateless/statefull support.
> > * record-routing mode is available and optionnal.
> >
> > Interoperability issues:
> > partysip is (try) to be compliant with the latest draft-09.
> > But almost all HW phones (or even software ones) are not. This fact
> > makes it difficult to successfully handle calls when record-routing
> > mode is enabled! Even if partysip has the backward compatibility
> > mechanism with rfc2543, softwares and HW phones are not exactly
> > compliant with it! If you are not testing partysip: DO NOT
> > enable record-routing.
> >
> > I've been able to use 2 UA (josua) and 2 proxy (partysip) and
> > I tested call flows with and without record-routing and it's
> > working fine! I'm using the "draft-ietf-sipping-call-flows-00.txt"
> > to verfiy the validity of the call flows. (but this spec contains
> > a few errors I'll report...)
> >
> > Configuration :
> >  plenty of users are trying to use partysip with the original
> > configuration file (partysip.conf) which is defined to be used for
> > local test on 127.0.0.1. partysip can't support using two different
> > interface and if partysip is running on this interface, it won't
> > be able to handle UA that are not defined to run on 127.0.0.1.
> > Remember to edit at least the serverip entry in the config file
> > to be the IP of your host for the network you are testing.
> >
> > Next step for partysip:
> > * clean the code (especially make sfp.c and slp.c more readable :)
> > * call plugins evrywhere they must be called (this is tested
> >   only for new incomnig request, new outgoing request in uap,
> >   but not tested for requests and responses for stateless and
> >   statefull mode as no operations are actually needed.
> > * new plugins:
> >   * accounting (with record-route enabled)
> >   * filtering with a 'static' table for forwarding/rejecting request
> >
> > josua, partysip and osip pre release are available on
> > osip.atosc.org/download. Please report any success or failure tests!
> > The new version is running on anode.atosc.org port 5060.
> >
> > Hope this is enough for you.
> > Enjoy
> > Aymeric
> >
> >
> > _______________________________________________
> > Partysip-dev mailing list
> > address@hidden
> > http://mail.freesoftware.fsf.org/mailman/listinfo/partysip-dev
> >
>
> _______________________________________________
> Partysip-dev mailing list
> address@hidden
> http://mail.freesoftware.fsf.org/mailman/listinfo/partysip-dev
>