[Plex86-devel] panic: default case on i.b1 of 0xCE

[Felix Nawothnig]

Hi.

I'm trying to get plex86 with win95 as guest os working but when i try to start 
plex it shows up a screen saying a msg like "VGA BIOS" etc. but crashed 
immediatly with

bochs: disk: enabling LBA mode
::plex86 panic: 
::default case on i.b1 of 0xCE

Fatal monitor error caused Panic


The whole msg:

Processing config file ../conf/win95...
Allocating 16MB of physical memory in VM
Mapping virtualized physical memory into monitor
Zeroing virtualized physical memory
Mapping monitor print buffer into user mem.
bochs: [cmos] Setting initial clock to: Wed Sep 29 07:12:35 1999
bochs: font_width = 8
bochs: font_height = 16
bochs: default_depth = 16
bochs: waiting for MapNotify
bochs: MapNotify found.
bochs: vga: interval=200000
bochs: TTY not used, serial port is not connected
bochs: bx_options.floppy_command_delay = 500
bochs: Opening image for device 0
ROM: loading image '../bios/BIOS-plex86-current' @ 0xf0000 (65536 bytes)
ROM: loading image '../bios/VGABIOS-elpin-2.40' @ 0xc0000 (32768 bytes)
Setting prescan depth to 3
prescan on
Processed 73 lines of config file '../conf/win95'
Initializing plugins
Running VM
::init_monitor OK -----------------
nexus_size = 0x24E

bochs: CMOS: write reg 14h: value = 04h
::sysIOOut: No handler defined for port 0x46E8!.

::sysIOOut: No handler defined for port 0x102!.

::sysIOOut: No handler defined for port 0x4AE8!.

bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: vga: io write: 3da: ignoring: feature ctrl & vert sync
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write 3c0: address mode reg=16
bochs: vga: io write 3c0: address mode reg=17
bochs: vga: io write 3c0: address mode reg=18
bochs: vga: io write 3c0: address mode reg=19
bochs: vga: io write 3c0: address mode reg=20
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: disk: enabling LBA mode
::plex86 panic: 
::default case on i.b1 of 0xCE

Fatal monitor error caused Panic
eax:0x70001
ebx:0x7c00
ecx:0x70001
edx:0x80
ebp:0xfff8
esi:0x0
edi:0x500
esp:0xfffe
eflags:0x86
eip:0xffa4
cs:s=0x0, dl=0xffff, dh=0x9b00, valid=1
ss:s=0x0, dl=0xffff, dh=0x9300, valid=1
ds:s=0x0, dl=0xffff, dh=0x9300, valid=1
es:s=0x0, dl=0xffff, dh=0x9300, valid=1
fs:s=0x0, dl=0xffff, dh=0x9300, valid=1
gs:s=0x0, dl=0xffff, dh=0x9300, valid=1
ldtr:s=0x0, dl=0x0, dh=0x0, valid=0
tr:s=0x0, dl=0x0, dh=0x0, valid=0
gdtr:base=0x0, limit=0x0
idtr:base=0x0, limit=0x3ff
dr0:0x0
dr1:0x0
dr2:0x0
dr3:0x0
dr6:0xffff0ff0
dr7:0x400
tr3:0x0
tr4:0x0
tr5:0x0
tr6:0x0
tr7:0x0
cr0:0x60000032
cr1:0x0
cr2:0x0
cr3:0x0
cr4:0x0
inhibit_mask:0
Stack dump:
Current instruction:
 0000.0000FFA4  CE                       into   

Shutting down plugins
bochs: Note: X11: bx_gui_c::exit() not implemented yet.
Unmapping guest physical memory.
Unmapping monitor print buffer.
Tearing down VM
Closing VM



flx