[Qemu-devel] [RFC PATCH 3/6] scsi-generic: allow customization of the lun

[Paolo Bonzini]

This allows passthrough of devices with LUN != 0, by redirecting them to
LUN0 in the emulated target.

Signed-off-by: Paolo Bonzini <address@hidden>
---
 hw/scsi-generic.c |   38 +++++++++++++++++++++++++++++++++-----
 1 files changed, 33 insertions(+), 5 deletions(-)

diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index e6f0efd..fb38934 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -230,8 +230,11 @@ static void scsi_read_data(SCSIRequest *req)
         return;
     }
 
-    if (r->req.cmd.buf[0] == REQUEST_SENSE && s->driver_status & 
SG_ERR_DRIVER_SENSE)
-    {
+    switch (r->req.cmd.buf[0]) {
+    case REQUEST_SENSE:
+        if (!(s->driver_status & SG_ERR_DRIVER_SENSE)) {
+            break;
+        }
         s->senselen = MIN(r->len, s->senselen);
         memcpy(r->buf, s->sensebuf, s->senselen);
         r->io_header.driver_status = 0;
@@ -246,6 +249,32 @@ static void scsi_read_data(SCSIRequest *req)
         /* Clear sensebuf after REQUEST_SENSE */
         scsi_clear_sense(s);
         return;
+
+    case REPORT_LUNS:
+       assert(!s->lun);
+        if (r->req.cmd.xfer < 16) {
+            scsi_command_complete(r, -EINVAL);
+            return;
+        }
+        r->io_header.driver_status = 0;
+        r->io_header.status = 0;
+        r->io_header.dxfer_len  = 16;
+        r->len = -1;
+        r->buf[3] = 8;
+        scsi_req_data(&r->req, 16);
+        scsi_command_complete(r, 0);
+        return;
+
+    case INQUIRY:
+        if (req->lun != s->lun) {
+            if (r->req.cmd.xfer < 1) {
+                scsi_command_complete(r, -EINVAL);
+                return;
+            }
+            outbuf[0] = 0x7f;
+            return MIN(req->cmd.xfer, SCSI_MAX_INQUIRY_LEN);
+        }
+        break;
     }
 
     ret = execute_command(s->bs, r, SG_DXFER_FROM_DEV, scsi_read_complete);
@@ -335,7 +364,7 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t 
*cmd)
     SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
     int ret;
 
-    if (cmd[0] != REQUEST_SENSE && req->lun != s->lun) {
+    if (cmd[0] != REQUEST_SENSE && cmd[0] != INQUIRY && req->lun != s->lun) {
         DPRINTF("Unimplemented LUN %d\n", req->lun);
         scsi_set_sense(s, SENSE_CODE(LUN_NOT_SUPPORTED));
         r->req.status = CHECK_CONDITION;
@@ -510,8 +539,6 @@ static int scsi_generic_initfn(SCSIDevice *dev)
     }
 
     /* define device state */
-    s->lun = scsiid.lun;
-    DPRINTF("LUN %d\n", s->lun);
     s->qdev.type = scsiid.scsi_type;
     DPRINTF("device type %d\n", s->qdev.type);
     if (s->qdev.type == TYPE_TAPE) {
@@ -552,6 +579,7 @@ static SCSIDeviceInfo scsi_generic_info = {
     .get_sense    = scsi_get_sense,
     .qdev.props   = (Property[]) {
         DEFINE_BLOCK_PROPERTIES(SCSIGenericState, qdev.conf),
+        DEFINE_PROP_UINT32("lun",  SCSIDiskState, lun, 0),
         DEFINE_PROP_END_OF_LIST(),
     },
 };
-- 
1.7.4.4