Re: [Qemu-devel] [PATCH] esp: add Tekram DC-390 emulation (PC SCSI adapter)

[Andreas Färber]

Am 01.08.2012 18:59, schrieb Hervé Poussineau:
> Difference with AMD PCscsi is that DC-390 contains a EEPROM,
> and that a romfile is available to add INT13 support.
> 
> This has been successfully tested on:
> - MS DOS 6.22 (using DC390 ASPI driver)
> - MS Windows 98 SE (using DC390 driver)
> - MS Windows NT 3.1 (using DC390 driver)
> - MS Windows NT 4.0 (using DC390 driver)
> - hard disk and cdrom boot
> 
> Signed-off-by: Hervé Poussineau <address@hidden>
> 
> ---
> 
> You're now able to install MS Windows NT 3.1 (which does not support
> IDE cdroms) directly on an empty VM, without installing MS-DOS first!
> 
>  hw/esp.c |  116 
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 116 insertions(+)
> 
> diff --git a/hw/esp.c b/hw/esp.c
> index c6422ad..423e311 100644
> --- a/hw/esp.c
> +++ b/hw/esp.c
> @@ -26,6 +26,7 @@
>  #include "sysbus.h"
>  #include "pci.h"
>  #include "scsi.h"
> +#include "eeprom93xx.h"
>  #include "esp.h"
>  #include "trace.h"
>  #include "qemu-log.h"
> @@ -1185,10 +1186,125 @@ static TypeInfo esp_pci_info = {
>      .class_init = esp_pci_class_init,
>  };
>  
> +typedef struct {
> +    PCIESPState pci;
> +    eeprom_t *eeprom;
> +} DC390State;
> +
> +static uint32_t dc390_read_config(PCIDevice *dev, uint32_t addr, int l)
> +{
> +    DC390State *pci = DO_UPCAST(DC390State, pci.dev, dev);

Using QOM cast macros in place of DO_UPCAST() would be preferred.

> +    uint32_t val;
> +
> +    val = pci_default_read_config(dev, addr, l);
> +
> +    if (addr == 0x00 && l == 1) {
> +        /* First byte of address space is AND-ed with EEPROM DO line */
> +        if (!eeprom93xx_read(pci->eeprom)) {
> +            val &= ~0xff;
> +        }
> +    }
> +
> +    return val;
> +}
> +
> +static void dc390_write_config(PCIDevice *dev,
> +                               uint32_t addr, uint32_t val, int l)
> +{
> +    DC390State *pci = DO_UPCAST(DC390State, pci.dev, dev);
> +    if (addr == 0x80) {
> +        /* EEPROM write */
> +        int eesk = val & 0x80 ? 1 : 0;
> +        int eedi = val & 0x40 ? 1 : 0;
> +        eeprom93xx_write(pci->eeprom, 1, eesk, eedi);
> +    } else if (addr == 0xc0) {
> +        /* EEPROM CS low */
> +        eeprom93xx_write(pci->eeprom, 0, 0, 0);
> +    } else {
> +        pci_default_write_config(dev, addr, val, l);
> +    }
> +}
> +
> +static int dc390_scsi_init(PCIDevice *dev)
> +{
> +    DC390State *pci = DO_UPCAST(DC390State, pci.dev, dev);
> +    uint8_t *contents;
> +    uint16_t chksum = 0;
> +    int i, ret;
> +
> +    /* init base class */
> +    ret = esp_pci_scsi_init(dev);
> +    if (ret < 0) {
> +        return ret;
> +    }
> +
> +    /* EEPROM */
> +    pci->eeprom = eeprom93xx_new(&dev->qdev, 64);

DEVICE(dev)

> +
> +    /* set default eeprom values */
> +    contents = (uint8_t *)eeprom93xx_data(pci->eeprom);
> +
> +#define EE_ADAPT_SCSI_ID 64
> +#define EE_MODE2         65
> +#define EE_DELAY         66
> +#define EE_TAG_CMD_NUM   67
> +#define EE_ADAPT_OPTIONS 68
> +#define EE_BOOT_SCSI_ID  69
> +#define EE_BOOT_SCSI_LUN 70
> +#define EE_CHKSUM1       126
> +#define EE_CHKSUM2       127
> +
> +#define OPTION_F6_F8_AT_BOOT   0x01
> +#define OPTION_BOOT_FROM_CDROM 0x02
> +#define OPTION_INT13           0x04
> +#define OPTION_SCAM_SUPPORT    0x08

Usually such constants are requested not to be in the middle of a function.

> +
> +    for (i = 0; i < 16; i++) {
> +        contents[i * 2] = 0x57;
> +        contents[i * 2 + 1] = 0x00;
> +    }
> +    contents[EE_ADAPT_SCSI_ID] = 7;
> +    contents[EE_MODE2] = 0x0f;
> +    contents[EE_TAG_CMD_NUM] = 0x04;
> +    contents[EE_ADAPT_OPTIONS] = OPTION_F6_F8_AT_BOOT
> +                               | OPTION_BOOT_FROM_CDROM
> +                               | OPTION_INT13;
> +
> +    /* update eeprom checksum */
> +    for (i = 0; i < EE_CHKSUM1; i += 2) {
> +        chksum += contents[i] + (((uint16_t)contents[i + 1]) << 8);
> +    }
> +    chksum = 0x1234 - chksum;
> +    contents[EE_CHKSUM1] = chksum & 0xff;
> +    contents[EE_CHKSUM2] = chksum >> 8;
> +
> +    return 0;
> +}
> +
> +static void dc390_class_init(ObjectClass *klass, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(klass);
> +    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
> +
> +    k->init = dc390_scsi_init;
> +    k->romfile = "INT13.BIN";
> +    k->config_read = dc390_read_config;
> +    k->config_write = dc390_write_config;
> +    dc->desc = "Tekram DC-390 SCSI adapter";
> +}
> +
> +static TypeInfo dc390_info = {

static const please.

> +    .name = "dc390",
> +    .parent = "am53c974",

Introduce a TYPE_... constant for the parent to avoid runtime breakage
if renamed?

Andreas

> +    .instance_size = sizeof(DC390State),
> +    .class_init = dc390_class_init,
> +};
> +
>  static void esp_register_types(void)
>  {
>      type_register_static(&sysbus_esp_info);
>      type_register_static(&esp_pci_info);
> +    type_register_static(&dc390_info);
>  }
>  
>  type_init(esp_register_types)
> 


-- 
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg