[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v18 5/7] pvpanic: add document of pvpanic
From: |
Hu Tao |
Subject: |
[Qemu-devel] [PATCH v18 5/7] pvpanic: add document of pvpanic |
Date: |
Wed, 10 Apr 2013 11:33:54 +0800 |
Signed-off-by: Hu Tao <address@hidden>
---
docs/specs/pvpanic.txt | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 docs/specs/pvpanic.txt
diff --git a/docs/specs/pvpanic.txt b/docs/specs/pvpanic.txt
new file mode 100644
index 0000000..d72d667
--- /dev/null
+++ b/docs/specs/pvpanic.txt
@@ -0,0 +1,37 @@
+PVPANIC DEVICE
+==============
+
+pvpanic device is a simulated ISA device, through which a guest panic
+event is sent to qemu, and a QMP event is generated. This allows
+management apps (e.g. libvirt) to be notified and respond to the event.
+
+The management app has the option of waiting for GUEST_PANICKED events,
+and/or polling for guest-panicked RunState, to learn when the pvpanic
+device has fired a panic event.
+
+ISA Interface
+-------------
+
+pvpanic uses port 0x505 to receive a panic event from the guest. On
+write, bit 0 is set to indicate guest panic has happened. On read, bit
+0 is set to indicate guest panic notification is supported. Remaining
+bits are reserved, and should be written as 0, and ignored on read.
+
+ACPI Interface
+--------------
+
+pvpanic device is defined with ACPI ID "QEMU0001". Custom methods:
+
+RDPT: To determine whether guest panic notification is supported.
+Arguments: None
+Return: Returns a byte, bit 0 set to indicate guest panic
+ notification is supported. Other bits are reserved and
+ should be ignored.
+
+WRPT: To send a guest panic event
+Arguments: Arg0 is a byte, with bit 0 set to indicate guest panic has
+ happened. Other bits are reserved and should be cleared.
+Return: None
+
+The ACPI device will automatically refer to the right port in case it
+is modified.
--
1.8.1.4
- [Qemu-devel] [PATCH v18 0/7] Add pvpanic device to deal with guest panic event, Hu Tao, 2013/04/09
- [Qemu-devel] [PATCH v18 4/7] pvpanic: pass configurable ioport to seabios, Hu Tao, 2013/04/09
- [Qemu-devel] [PATCH v18 5/7] pvpanic: add document of pvpanic,
Hu Tao <=
- [Qemu-devel] [PATCH v18 1/7] add a new runstate: RUN_STATE_GUEST_PANICKED, Hu Tao, 2013/04/09
- [Qemu-devel] [PATCH v18 7/7] Wire up disabled wait a panicked event on s390, Hu Tao, 2013/04/09
- [Qemu-devel] [PATCH v18 6/7] pvpanic: create pvpanic by default for machine 1.5, Hu Tao, 2013/04/09
- Re: [Qemu-devel] [PATCH v18 0/7] Add pvpanic device to deal with guest panic event, Paolo Bonzini, 2013/04/10