Re: [Qemu-devel] Request for openhackware.git mirror

[Andreas Färber]

Hi Mark,

Am 03.03.2014 19:08, schrieb Mark Cave-Ayland:
> On 02/03/14 20:41, Andreas Färber wrote:
> 
>> [1] Using `make CROSS_COMPILE=powerpc-elf-` works for GCC 4.8.2 and
>> binutils 2.24; I did not find a solution for my identically versioned
>> CROSS_COMPILE=powerpc-eabi- setup (that I had been successfully using
>> for OpenBIOS), lacking an __eabi symbol on final ld.
> 
> Hi Andreas,
> 
> This is great news! FWIW I've just tried building a clone of the
> repository at git://git.qemu-project.org/openhackware.git and it looks
> good until the final link stage:
> 
> 
> powerpc-elf-ld -m elf32ppc -O2 -g -nostdlib -T src/main.ld -o
> .objs/main.out .objs/main.o .objs/bootinfos.o .objs/bloc.o .objs/pci.o
> .objs/of.o .objs/start.o .objs/nvram.o .objs/vga.o .objs/mm.o
> .objs/char.o .objs/malloc.o .objs/errno.o .objs/_vprintf.o
> .objs/printf.o .objs/sprintf.o .objs/snprintf.o .objs/vprintf.o
> .objs/vsprintf.o .objs/vsnprintf.o .objs/dprintf.o .objs/vdprintf.o
> .objs/memcpy.o .objs/memccpy.o .objs/mempcpy.o .objs/memmove.o
> .objs/memcmove.o .objs/mempmove.o .objs/memset.o .objs/memcmp.o
> .objs/memchr.o .objs/rawmemchr.o .objs/memrchr.o .objs/memmem.o
> .objs/strcpy.o .objs/strdup.o .objs/strndup.o .objs/stpcpy.o
> .objs/stpncpy.o .objs/strcat.o .objs/strncat.o .objs/strcmp.o
> .objs/strcasecmp.o .objs/strncmp.o .objs/strncasecmp.o .objs/strchr.o
> .objs/strchrnul.o .objs/strrchr.o .objs/basename.o .objs/dirname.o
> .objs/strlen.o .objs/strnlen.o .objs/exec_core.o .objs/exec_elf.o
> .objs/exec_xcoff.o .objs/exec_macho.o .objs/exec_chrp.o
> .objs/exec_prep.o .objs/exec_pef.o .objs/fs_core.o .objs/fs_raw.o
> .objs/fs_ext2.o .objs/fs_isofs.o .objs/fs_hfs.o .objs/part_core.o
> .objs/part_apple.o .objs/part_isofs.o .objs/part_prep.o
> .objs/dev_char_pckbd.o .objs/dev_char_kbdadb.o .objs/dev_char_kbd.o
> powerpc-elf-ld: .objs/main.out section .text.startup will not fit in
> region start
> powerpc-elf-ld: section .text [0000000005800400 -> 0000000005812e23]
> overlaps section .text.startup [0000000005800054 -> 00000000058006d7]
> powerpc-elf-ld: section .rodata.str1.4 [00000000058006d8 ->
> 0000000005804cdb] overlaps section .text [0000000005800400 ->
> 0000000005812e23]
> powerpc-elf-ld: region start overflowed by 18668 bytes
> make: *** [.objs/main.out] Error 1
> 
> address@hidden:~/src/ohw/openhackware$ powerpc-elf-gcc -v
> Using built-in specs.
> COLLECT_GCC=powerpc-elf-gcc
> COLLECT_LTO_WRAPPER=/home/build/ppc-cross/libexec/gcc/powerpc-elf/4.8.2/lto-wrapper
> 
> Target: powerpc-elf
> Configured with: ../gcc-4.8.2/configure --prefix=/home/build/ppc-cross
> --enable-languages=c --target=powerpc-elf --disable-libssp
> Thread model: single
> gcc version 4.8.2 (GCC)
> address@hidden:~/src/ohw/openhackware$
> 
> 
> Am I missing something from the build in order for the final link to
> complete correctly?

Hm, repository looks okay, and I didn't run into this yet. Possibly you
are using different binutils?

Presumably you did try make clean CROSS_COMPILE=... :)

I chose not to apply one hunk from Rene Rebe since not needed here.
Maybe the above .rodata.str1.4 would end up in .rodata this way?

Make it link at al.

  - Rene Rebe <address@hidden>

--- OpenHackWare-release-0.4/src/main.ld       2005-03-31
09:23:33.000000000 +0200
+++ OpenHackWare-release-0.4-hacked/src/main.ld        2008-05-06
11:23:29.000000000 +0200
@@ -49,7 +49,7 @@
         _sdata_end = . ;
         . = ALIGN(4) ;
         _ro_start = . ;
-        .rodata    : { *(.rodata) } > bios
+        .rodata    : { *(.rodata*) } > bios
         _ro_end = . ;
         . = ALIGN(4) ;
         _RTAS_start = .;

Cheers,
Andreas