[Qemu-devel] [PATCH v2 2/3] e1000: allow command-line selection of card model

[Gabriel L. Somlo]

Allow selection of different card models from the qemu
command line, to better accomodate a wider range of guests.

Signed-off-by: Romain Dolbeau <address@hidden>
Signed-off-by: Gabriel Somlo <address@hidden>
---
 hw/net/e1000.c | 95 ++++++++++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 79 insertions(+), 16 deletions(-)

diff --git a/hw/net/e1000.c b/hw/net/e1000.c
index 1b8c513..74093ce 100644
--- a/hw/net/e1000.c
+++ b/hw/net/e1000.c
@@ -69,23 +69,30 @@ static int debugflags = DBGBIT(TXERR) | DBGBIT(GENERAL);
 
 /*
  * HW models:
- *  E1000_DEV_ID_82540EM works with Windows and Linux
+ *  E1000_DEV_ID_82540EM works with Windows, Linux, and OS X <= 10.8
  *  E1000_DEV_ID_82573L OK with windoze and Linux 2.6.22,
  *     appears to perform better than 82540EM, but breaks with Linux 2.6.18
  *  E1000_DEV_ID_82544GC_COPPER appears to work; not well tested
+ *  E1000_DEV_ID_82545EM_COPPER works with Linux and OS X >= 10.6
  *  Others never tested
  */
-enum { E1000_DEVID = E1000_DEV_ID_82540EM };
 
 /*
  * May need to specify additional MAC-to-PHY entries --
  * Intel's Windows driver refuses to initialize unless they match
  */
-enum {
-    PHY_ID2_INIT = E1000_DEVID == E1000_DEV_ID_82573L ?                0xcc2 :
-                   E1000_DEVID == E1000_DEV_ID_82544GC_COPPER ?        0xc30 :
-                   /* default to E1000_DEV_ID_82540EM */       0xc20
-};
+static inline uint16_t
+e1000_phy_id2_init(uint16_t device_id)
+{
+    switch (device_id) {
+    case E1000_DEV_ID_82573L:
+        return 0xcc2;
+    case E1000_DEV_ID_82544GC_COPPER:
+        return 0xc30;
+    default:
+        return 0xc20; /* default for 82540EM and others */
+    }
+}
 
 typedef struct E1000State_st {
     /*< private >*/
@@ -153,7 +160,7 @@ typedef struct E1000State_st {
     bool is_8257x;
 } E1000State;
 
-#define TYPE_E1000 "e1000"
+#define TYPE_E1000 "e1000-base"
 
 #define E1000(obj) \
     OBJECT_CHECK(E1000State, (obj), TYPE_E1000)
@@ -237,7 +244,7 @@ static const char phy_regcap[0x20] = {
 static const uint16_t phy_reg_init[] = {
     [PHY_CTRL] = 0x1140,
     [PHY_STATUS] = 0x794d, /* link initially up with not completed autoneg */
-    [PHY_ID1] = 0x141,                         [PHY_ID2] = PHY_ID2_INIT,
+    [PHY_ID1] = 0x141, /* [PHY_ID2] configured per DevId, from e1000_reset() */
     [PHY_1000T_CTRL] = 0x0e00,                 [M88E1000_PHY_SPEC_CTRL] = 
0x360,
     [M88E1000_EXT_PHY_SPEC_CTRL] = 0x0d60,     [PHY_AUTONEG_ADV] = 0xde1,
     [PHY_LP_ABILITY] = 0x1e0,                  [PHY_1000T_STATUS] = 0x3c00,
@@ -377,6 +384,7 @@ rxbufsize(uint32_t v)
 static void e1000_reset(void *opaque)
 {
     E1000State *d = opaque;
+    PCIDeviceClass *pdc = PCI_DEVICE_GET_CLASS(d);
     uint8_t *macaddr = d->conf.macaddr.a;
     int i;
 
@@ -387,6 +395,7 @@ static void e1000_reset(void *opaque)
     d->mit_ide = 0;
     memset(d->phy_reg, 0, sizeof d->phy_reg);
     memmove(d->phy_reg, phy_reg_init, sizeof phy_reg_init);
+    d->phy_reg[PHY_ID2] = e1000_phy_id2_init(pdc->device_id);
     memset(d->mac_reg, 0, sizeof d->mac_reg);
     memmove(d->mac_reg, mac_reg_init, sizeof mac_reg_init);
     d->rxbuf_min_shift = 1;
@@ -1442,9 +1451,13 @@ static const VMStateDescription vmstate_e1000 = {
     }
 };
 
+/*
+ * EEPROM contents documented in Tables 5-2 and 5-3, pp. 98-102.
+ * Note: A valid DevId will be inserted during pci_e1000_init().
+ */
 static const uint16_t e1000_eeprom_template[64] = {
     0x0000, 0x0000, 0x0000, 0x0000,      0xffff, 0x0000,      0x0000, 0x0000,
-    0x3000, 0x1000, 0x6403, E1000_DEVID, 0x8086, E1000_DEVID, 0x8086, 0x3040,
+    0x3000, 0x1000, 0x6403, 0 /*DevId*/, 0x8086, 0 /*DevId*/, 0x8086, 0x3040,
     0x0008, 0x2000, 0x7e14, 0x0048,      0x1000, 0x00d8,      0x0000, 0x2700,
     0x6cc9, 0x3150, 0x0722, 0x040b,      0x0984, 0x0000,      0xc000, 0x0706,
     0x1008, 0x0000, 0x0f04, 0x7fff,      0x4d01, 0xffff,      0xffff, 0xffff,
@@ -1535,6 +1548,7 @@ static int pci_e1000_init(PCIDevice *pci_dev)
 {
     DeviceState *dev = DEVICE(pci_dev);
     E1000State *d = E1000(pci_dev);
+    PCIDeviceClass *pdc = PCI_DEVICE_GET_CLASS(pci_dev);
     uint8_t *pci_conf;
     uint16_t checksum = 0;
     int i;
@@ -1559,6 +1573,7 @@ static int pci_e1000_init(PCIDevice *pci_dev)
     macaddr = d->conf.macaddr.a;
     for (i = 0; i < 3; i++)
         d->eeprom_data[i] = (macaddr[2*i+1]<<8) | macaddr[2*i];
+    d->eeprom_data[11] = d->eeprom_data[13] = pdc->device_id;
     for (i = 0; i < EEPROM_CHECKSUM_REG; i++)
         checksum += d->eeprom_data[i];
     checksum = (uint16_t) EEPROM_SUM - checksum;
@@ -1594,17 +1609,25 @@ static Property e1000_properties[] = {
     DEFINE_PROP_END_OF_LIST(),
 };
 
+typedef struct E1000Info_st {
+    const char *name;
+    uint16_t   vendor_id;
+    uint16_t   device_id;
+    uint8_t    revision;
+} E1000Info;
+
 static void e1000_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+    const E1000Info *info = data;
 
     k->init = pci_e1000_init;
     k->exit = pci_e1000_uninit;
     k->romfile = "efi-e1000.rom";
-    k->vendor_id = PCI_VENDOR_ID_INTEL;
-    k->device_id = E1000_DEVID;
-    k->revision = 0x03;
+    k->vendor_id = info->vendor_id;
+    k->device_id = info->device_id;
+    k->revision = info->revision;
     k->class_id = PCI_CLASS_NETWORK_ETHERNET;
     set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
     dc->desc = "Intel Gigabit Ethernet";
@@ -1613,16 +1636,56 @@ static void e1000_class_init(ObjectClass *klass, void 
*data)
     dc->props = e1000_properties;
 }
 
-static const TypeInfo e1000_info = {
+static const TypeInfo e1000_base_info = {
     .name          = TYPE_E1000,
     .parent        = TYPE_PCI_DEVICE,
     .instance_size = sizeof(E1000State),
-    .class_init    = e1000_class_init,
+    .abstract      = true,
+};
+
+static const E1000Info e1000_devices[] = {
+    {
+        .name      = "e1000", /* default, alias for "e1000-82540em" */
+        .vendor_id = PCI_VENDOR_ID_INTEL,
+        .device_id = E1000_DEV_ID_82540EM,
+        .revision  = 0x03,
+    },
+    {
+        .name      = "e1000-82540em",
+        .vendor_id = PCI_VENDOR_ID_INTEL,
+        .device_id = E1000_DEV_ID_82540EM,
+        .revision  = 0x03,
+    },
+    {
+        .name      = "e1000-82544gc",
+        .vendor_id = PCI_VENDOR_ID_INTEL,
+        .device_id = E1000_DEV_ID_82544GC_COPPER,
+        .revision  = 0x03,
+    },
+    {
+        .name      = "e1000-82545em",
+        .vendor_id = PCI_VENDOR_ID_INTEL,
+        .device_id = E1000_DEV_ID_82545EM_COPPER,
+        .revision  = 0x03,
+    },
 };
 
 static void e1000_register_types(void)
 {
-    type_register_static(&e1000_info);
+    int i;
+
+    type_register_static(&e1000_base_info);
+    for (i = 0; i < ARRAY_SIZE(e1000_devices); i++) {
+        const E1000Info *info = &e1000_devices[i];
+        TypeInfo type_info = {};
+
+        type_info.name = info->name;
+        type_info.parent = TYPE_E1000;
+        type_info.class_data = (void *)info;
+        type_info.class_init = e1000_class_init;
+
+        type_register(&type_info);
+    }
 }
 
 type_init(e1000_register_types)
-- 
1.9.0