[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 11/15] tcg-mips: Use mips64r6 instructions in tc
From: |
James Hogan |
Subject: |
Re: [Qemu-devel] [PATCH 11/15] tcg-mips: Use mips64r6 instructions in tcg_out_movi |
Date: |
Tue, 9 Feb 2016 16:50:52 +0000 |
User-agent: |
Mutt/1.5.23 (2014-03-12) |
Hi Richard,
On Tue, Feb 09, 2016 at 09:39:59PM +1100, Richard Henderson wrote:
> The DAHI and DATI instructions can eliminate two insns
> off the pre-r6 path.
>
> Signed-off-by: Richard Henderson <address@hidden>
> ---
> tcg/mips/tcg-target.c | 63
> +++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 63 insertions(+)
>
> diff --git a/tcg/mips/tcg-target.c b/tcg/mips/tcg-target.c
> index 97f9251..f7f4331 100644
> --- a/tcg/mips/tcg-target.c
> +++ b/tcg/mips/tcg-target.c
> @@ -303,7 +303,9 @@ typedef enum {
> OPC_ORI = 015 << 26,
> OPC_XORI = 016 << 26,
> OPC_LUI = 017 << 26,
> + OPC_AUI = OPC_LUI,
> OPC_DADDIU = 031 << 26,
> + OPC_DAUI = 035 << 26,
> OPC_LB = 040 << 26,
> OPC_LH = 041 << 26,
> OPC_LW = 043 << 26,
> @@ -383,6 +385,8 @@ typedef enum {
> OPC_REGIMM = 001 << 26,
> OPC_BLTZ = OPC_REGIMM | (000 << 16),
> OPC_BGEZ = OPC_REGIMM | (001 << 16),
> + OPC_DAHI = OPC_REGIMM | (006 << 16),
> + OPC_DATI = OPC_REGIMM | (036 << 16),
>
> OPC_SPECIAL2 = 034 << 26,
> OPC_MUL_R5 = OPC_SPECIAL2 | 002,
> @@ -402,6 +406,10 @@ typedef enum {
> OPC_SEB = OPC_SPECIAL3 | 02040,
> OPC_SEH = OPC_SPECIAL3 | 03040,
>
> + OPC_PCREL = 073 << 26,
> + OPC_ADDIUPC = OPC_PCREL | (0 << 19),
> + OPC_ALUIPC = OPC_PCREL | (3 << 19) | (7 << 16),
> +
> /* MIPS r6 doesn't have JR, JALR should be used instead */
> OPC_JR = use_mips32r6_instructions ? OPC_JALR : OPC_JR_R5,
>
> @@ -448,6 +456,17 @@ static inline void tcg_out_opc_imm(TCGContext *s,
> MIPSInsn opc,
> tcg_out32(s, inst);
> }
>
> +static inline void tcg_out_opc_pc19(TCGContext *s, MIPSInsn opc,
> + TCGReg rs, TCGArg imm)
> +{
> + int32_t inst;
> +
> + inst = opc;
> + inst |= (rs & 0x1F) << 21;
> + inst |= (imm & 0x7ffff);
> + tcg_out32(s, inst);
> +}
> +
> /*
> * Type bitfield
> */
> @@ -589,6 +608,50 @@ static void tcg_out_movi(TCGContext *s, TCGType type,
> }
> if (TCG_TARGET_REG_BITS == 32 || arg == (int32_t)arg) {
> tcg_out_opc_imm(s, OPC_LUI, ret, TCG_REG_ZERO, arg >> 16);
> + } else if (use_mips32r6_instructions) {
> + tcg_target_long disp = arg - (intptr_t)s->code_ptr;
> + if (disp == sextract32(disp, 2, 19) * 4) {
> + tcg_out_opc_pc19(s, OPC_ADDIUPC, ret, disp >> 2);
> + return;
> + } else if ((disp & ~(tcg_target_long)0xffff)
> + == sextract32(disp, 16, 16) * 0x10000) {
> + tcg_out_opc_imm(s, OPC_ALUIPC, ret, 0, disp >> 16);
I think ret and 0 are the wrong way around here. You're putting 0 in rs
(the destination register), which causes a seg fault.
OUT: [size=56]
0xfff30b0064: lw s1,-8(s0)
0xfff30b0068: bnezalc zero,s1,0xfff30b0090
0xfff30b006c: nop
0xfff30b0070: j 0xfff0000000
0xfff30b0074: nop
0xfff30b0078: lui s1,0xbfc0
0xfff30b007c: ori s1,s1,0x580
0xfff30b0080: sd s1,256(s0)
0xfff30b0084: aluipc zero,0xfeb7
0xfff30b0088: j 0xfff30b0034
0xfff30b008c: ori v0,v0,0x4010
0xfff30b0090: aluipc zero,0xfeb7
0xfff30b0094: j 0xfff30b0034
0xfff30b0098: ori v0,v0,0x4013
Cheers
James
> + } else {
> + TCGReg in = TCG_REG_ZERO;
> + tcg_target_long tmp = (int16_t)arg;
> +
> + /* The R6 manual recommends construction of immediates in
> + order of low to high (ADDI, AUI, DAHI, DATI) in order
> + to simplify hardware recognizing these sequences. */
> +
> + if (tmp) {
> + tcg_out_opc_imm(s, OPC_ADDIU, ret, in, tmp);
> + in = ret;
> + }
> + arg = (arg - tmp) >> 16;
> + tmp = (int16_t)arg;
> +
> + /* Note that DAHI and DATI only have one register operand,
> + and are thus we must put a zero low part in place. Also
> + note that we already eliminated simple 32-bit constants
> + so we know this must happen. */
> + if (tmp || in != ret) {
> + tcg_out_opc_imm(s, OPC_AUI, ret, in, tmp);
> + }
> + arg = (arg - tmp) >> 16;
> + tmp = (int16_t)arg;
> +
> + if (tmp) {
> + tcg_out_opc_imm(s, OPC_DAHI, ret, 0, tmp);
> + }
> + arg = (arg - tmp) >> 16;
> + tcg_debug_assert(arg == (int16_t)arg);
> +
> + if (arg) {
> + tcg_out_opc_imm(s, OPC_DATI, ret, 0, arg);
> + }
> + return;
> + }
> } else {
> tcg_out_movi(s, TCG_TYPE_I32, ret, arg >> 31 >> 1);
> if (arg & 0xffff0000ull) {
> --
> 2.5.0
>
signature.asc
Description: Digital signature
- [Qemu-devel] [PATCH 03/15] tcg-mips: Adjust move functions for mips64, (continued)
- [Qemu-devel] [PATCH 03/15] tcg-mips: Adjust move functions for mips64, Richard Henderson, 2016/02/09
- [Qemu-devel] [PATCH 05/15] tcg-mips: Adjust prologue for mips64, Richard Henderson, 2016/02/09
- [Qemu-devel] [PATCH 06/15] tcg-mips: Add tcg unwind info, Richard Henderson, 2016/02/09
- [Qemu-devel] [PATCH 08/15] tcg-mips: Adjust calling conventions for mips64, Richard Henderson, 2016/02/09
- [Qemu-devel] [PATCH 09/15] tcg-mips: Fix exit_tb for mips64, Richard Henderson, 2016/02/09
- [Qemu-devel] [PATCH 10/15] tcg-mips: Move bswap code to subroutines, Richard Henderson, 2016/02/09
- [Qemu-devel] [PATCH 07/15] tcg-mips: Adjust qemu_ld/st for mips64, Richard Henderson, 2016/02/09
- [Qemu-devel] [PATCH 12/15] tcg-mips: Use mips64r6 instructions in tcg_out_ldst, Richard Henderson, 2016/02/09
- [Qemu-devel] [PATCH 13/15] tcg-mips: Use mips64r6 instructions in constant addition, Richard Henderson, 2016/02/09
- [Qemu-devel] [PATCH 11/15] tcg-mips: Use mips64r6 instructions in tcg_out_movi, Richard Henderson, 2016/02/09
- Re: [Qemu-devel] [PATCH 11/15] tcg-mips: Use mips64r6 instructions in tcg_out_movi,
James Hogan <=
- [Qemu-devel] [PATCH 15/15] tcg-mips: Use mipsr6 instructions in calls, Richard Henderson, 2016/02/09
- [Qemu-devel] [PATCH 14/15] tcg-mips: Use mipsr6 instructions in branches, Richard Henderson, 2016/02/09