[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [RFC 4/6] CLI: add -paused option
From: |
Eduardo Habkost |
Subject: |
Re: [Qemu-devel] [RFC 4/6] CLI: add -paused option |
Date: |
Mon, 16 Oct 2017 14:59:16 -0200 |
User-agent: |
Mutt/1.9.0 (2017-09-02) |
On Mon, Oct 16, 2017 at 06:22:54PM +0200, Igor Mammedov wrote:
> Signed-off-by: Igor Mammedov <address@hidden>
> ---
> include/sysemu/sysemu.h | 1 +
> qemu-options.hx | 15 ++++++++++++++
> qmp.c | 5 +++++
> vl.c | 54
> ++++++++++++++++++++++++++++++++++++++++++++++++-
> 4 files changed, 74 insertions(+), 1 deletion(-)
>
> diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
> index b213696..3feb94f 100644
> --- a/include/sysemu/sysemu.h
> +++ b/include/sysemu/sysemu.h
> @@ -66,6 +66,7 @@ typedef enum WakeupReason {
> QEMU_WAKEUP_REASON_OTHER,
> } WakeupReason;
>
> +void qemu_exit_preconfig_request(void);
> void qemu_system_reset_request(ShutdownCause reason);
> void qemu_system_suspend_request(void);
> void qemu_register_suspend_notifier(Notifier *notifier);
> diff --git a/qemu-options.hx b/qemu-options.hx
> index 39225ae..bd44db8 100644
> --- a/qemu-options.hx
> +++ b/qemu-options.hx
> @@ -3498,6 +3498,21 @@ STEXI
> Run the emulation in single step mode.
> ETEXI
>
> +DEF("paused", HAS_ARG, QEMU_OPTION_paused, \
> + "-paused [state=]postconf|preconf\n"
> + " postconf: pause QEMU after machine is initialized\n"
> + " preconf: pause QEMU before machine is initialized\n",
> + QEMU_ARCH_ALL)
I would like to allow pausing before machine-type is selected, so
management could run query-machines before choosing a
machine-type. Would that need a third "-pause" mode, or will we
be able to change "preconf" to pause before select_machine() is
called?
The same probably applies to other things initialized before
machine_run_board_init() that could be configurable using QMP,
including but not limited to:
* Accelerator configuration
* Registering global properties
* RAM size
* SMP/CPU configuration
> +STEXI
> address@hidden -paused
> address@hidden -paused
> +if set enabled interactive configuration stages before machine emulation
> starts.
> +'postconf' option value mimics -S option behaviour where machine is created
> +but emulation isn't started. 'preconf' option value pauses QEMU before
> machine
> +is created, which allows to query and configure properties affecting machine
> +initialization. Use monitor/QMP command 'cont' to go to exit paused state.
What if "-S" is used at the same time"? Will "cont" only
initialize the machine and wait for another "cont" command to
start the VCPUs, or will it unpause everything?
> +ETEXI
> +
> DEF("S", 0, QEMU_OPTION_S, \
> "-S freeze CPU at startup (use 'c' to start execution)\n",
> QEMU_ARCH_ALL)
> diff --git a/qmp.c b/qmp.c
> index e8c3031..49e9a5c 100644
> --- a/qmp.c
> +++ b/qmp.c
> @@ -167,6 +167,11 @@ void qmp_cont(Error **errp)
> BlockBackend *blk;
> Error *local_err = NULL;
>
> + if (runstate_check(RUN_STATE_PRELAUNCH)) {
> + qemu_exit_preconfig_request();
> + return;
> + }
> +
> /* if there is a dump in background, we should wait until the dump
> * finished */
> if (dump_in_progress()) {
> diff --git a/vl.c b/vl.c
> index 3fed457..30631fd 100644
> --- a/vl.c
> +++ b/vl.c
> @@ -555,6 +555,20 @@ static QemuOptsList qemu_fw_cfg_opts = {
> },
> };
>
> +static QemuOptsList qemu_paused_opts = {
> + .name = "paused",
> + .implied_opt_name = "state",
> + .head = QTAILQ_HEAD_INITIALIZER(qemu_paused_opts.head),
> + .desc = {
> + {
> + .name = "state",
> + .type = QEMU_OPT_STRING,
> + .help = "Pause state of QEMU on startup",
> + },
> + { /* end of list */ }
> + },
> +};
> +
> /**
> * Get machine options
> *
> @@ -1689,6 +1703,11 @@ static pid_t shutdown_pid;
> static int powerdown_requested;
> static int debug_requested;
> static int suspend_requested;
> +static enum {
> + PRECONFIG_CONT = 0,
> + PRECONFIG_PAUSE,
> + PRECONFIG_SKIP,
> +} preconfig_requested;
> static WakeupReason wakeup_reason;
> static NotifierList powerdown_notifiers =
> NOTIFIER_LIST_INITIALIZER(powerdown_notifiers);
> @@ -1773,6 +1792,11 @@ static int qemu_debug_requested(void)
> return r;
> }
>
> +void qemu_exit_preconfig_request(void)
> +{
> + preconfig_requested = PRECONFIG_CONT;
> +}
> +
> /*
> * Reset the VM. Issue an event unless @reason is SHUTDOWN_CAUSE_NONE.
> */
> @@ -1939,6 +1963,12 @@ static bool main_loop_should_exit(void)
> RunState r;
> ShutdownCause request;
>
> + if (runstate_check(RUN_STATE_PRELAUNCH)) {
> + if (preconfig_requested == PRECONFIG_CONT) {
> + preconfig_requested = PRECONFIG_SKIP;
> + return true;
> + }
> + }
> if (qemu_debug_requested()) {
> vm_stop(RUN_STATE_DEBUG);
> }
> @@ -3177,6 +3207,7 @@ int main(int argc, char **argv, char **envp)
> qemu_add_opts(&qemu_icount_opts);
> qemu_add_opts(&qemu_semihosting_config_opts);
> qemu_add_opts(&qemu_fw_cfg_opts);
> + qemu_add_opts(&qemu_paused_opts);
> module_call_init(MODULE_INIT_OPTS);
>
> runstate_init();
> @@ -3845,6 +3876,26 @@ int main(int argc, char **argv, char **envp)
> exit(1);
> }
> break;
> + case QEMU_OPTION_paused:
> + {
> + const char *value;
> +
> + opts = qemu_opts_parse_noisily(qemu_find_opts("paused"),
> + optarg, true);
> + if (opts == NULL) {
> + exit(1);
> + }
> + value = qemu_opt_get(opts, "state");
> + if (!strcmp(value, "postconf")) {
> + autostart = 0;
> + } else if (!strcmp(value, "preconf")) {
> + preconfig_requested = PRECONFIG_PAUSE;
> + } else {
> + error_report("incomplete '-paused' option\n");
> + exit(1);
> + }
> + break;
> + }
> case QEMU_OPTION_enable_kvm:
> olist = qemu_find_opts("machine");
> qemu_opts_parse_noisily(olist, "accel=kvm", false);
> @@ -4731,7 +4782,6 @@ int main(int argc, char **argv, char **envp)
> current_machine->boot_order = boot_order;
> current_machine->cpu_model = cpu_model;
>
> -
> /* parse features once if machine provides default cpu_type */
> if (machine_class->default_cpu_type) {
> current_machine->cpu_type = machine_class->default_cpu_type;
> @@ -4741,6 +4791,8 @@ int main(int argc, char **argv, char **envp)
> }
> }
>
> + main_loop(); /* do monitor/qmp handling at preconfig state if requested
> */
> +
I'm impressed by the simplicity of the implementation. I though
this would involve moving everything between this line and the
next main_loop() call outside main(), so they would be called by
qmp_cont().
Any expert on GLib's Event Loop sees any gotcha in this method?
I would like to do a careful review of main_loop_wait() and
main_loop_should_exit(), to ensure those functions don't depend
on anything that's initialized after this line. Probably a few
existing QMP commands can crash if machine is not initialized
yet?
The rules and expectations on initialization ordering are very
subtle, I suggest including test code for the new feature to
ensure nothing crashes or breaks in the future.
> machine_run_board_init(current_machine);
>
> realtime_init();
> --
> 2.7.4
>
--
Eduardo
- Re: [Qemu-devel] [RFC 2/6] numa: split out NumaOptions parsing into parse_NumaOptions(), (continued)
- Re: [Qemu-devel] [RFC 4/6] CLI: add -paused option,
Eduardo Habkost <=
- Re: [Qemu-devel] [RFC 4/6] CLI: add -paused option, Daniel P. Berrange, 2017/10/17
- Re: [Qemu-devel] [RFC 4/6] CLI: add -paused option, Laszlo Ersek, 2017/10/17
- Re: [Qemu-devel] [RFC 4/6] CLI: add -paused option, Daniel P. Berrange, 2017/10/17
- Re: [Qemu-devel] [RFC 4/6] CLI: add -paused option, Laszlo Ersek, 2017/10/17
- Re: [Qemu-devel] [RFC 4/6] CLI: add -paused option, Daniel P. Berrange, 2017/10/17
- Re: [Qemu-devel] [RFC 4/6] CLI: add -paused option, Igor Mammedov, 2017/10/17