[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [Qemu-arm] [PATCH 16/16] hw/arm/mps2-tz: Create PL081s
From: |
Philippe Mathieu-Daudé |
Subject: |
Re: [Qemu-devel] [Qemu-arm] [PATCH 16/16] hw/arm/mps2-tz: Create PL081s and MSCs |
Date: |
Fri, 17 Aug 2018 22:09:29 -0300 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.9.1 |
On 08/09/2018 10:01 AM, Peter Maydell wrote:
> The AN505 FPGA image includes four PL081 DMA controllers, each
> of which is gated by a Master Security Controller that allows
> the guest to prevent a non-secure DMA controller from accessing
> memory that is used by secure guest code. Create and wire
> up these devices.
>
> Signed-off-by: Peter Maydell <address@hidden>
> ---
> hw/arm/mps2-tz.c | 101 +++++++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 94 insertions(+), 7 deletions(-)
>
> diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c
> index 22180c56fb7..7d92bc5fe1c 100644
> --- a/hw/arm/mps2-tz.c
> +++ b/hw/arm/mps2-tz.c
> @@ -45,7 +45,9 @@
> #include "hw/misc/mps2-scc.h"
> #include "hw/misc/mps2-fpgaio.h"
> #include "hw/misc/tz-mpc.h"
> +#include "hw/misc/tz-msc.h"
> #include "hw/arm/iotkit.h"
> +#include "hw/dma/pl080.h"
> #include "hw/devices.h"
> #include "net/net.h"
> #include "hw/core/split-irq.h"
> @@ -75,8 +77,9 @@ typedef struct {
> UnimplementedDeviceState i2c[4];
> UnimplementedDeviceState i2s_audio;
> UnimplementedDeviceState gpio[4];
> - UnimplementedDeviceState dma[4];
> UnimplementedDeviceState gfx;
> + PL080State dma[4];
> + TZMSC msc[4];
> CMSDKAPBUART uart[5];
> SplitIRQ sec_resp_splitter;
> qemu_or_irq uart_irq_orgate;
> @@ -273,6 +276,65 @@ static MemoryRegion *make_mpc(MPS2TZMachineState *mms,
> void *opaque,
> return sysbus_mmio_get_region(SYS_BUS_DEVICE(mpc), 0);
> }
>
> +static MemoryRegion *make_dma(MPS2TZMachineState *mms, void *opaque,
> + const char *name, hwaddr size)
> +{
> + PL080State *dma = opaque;
> + int i = dma - &mms->dma[0];
This line is not trivial to read. I wondered "isn't this ptrdiff_t? why
not divide by sizeof(dma)...
> + SysBusDevice *s;
> + char *mscname = g_strdup_printf("%s-msc", name);
> + TZMSC *msc = &mms->msc[i];
> + DeviceState *iotkitdev = DEVICE(&mms->iotkit);
> + MemoryRegion *msc_upstream;
> + MemoryRegion *msc_downstream;
> +
> + /*
> + * Each DMA device is a PL081 whose transaction master interface
> + * is guarded by a Master Security Controller. The downstream end of
> + * the MSC connects to the IoTKit AHB Slave Expansion port, so the
> + * DMA devices can see all devices and memory that the CPU does.
> + */
> + init_sysbus_child(OBJECT(mms), mscname, msc, sizeof(mms->msc[0]),
sizeof(*msc) easier to read?
> + TYPE_TZ_MSC);
> + msc_downstream = sysbus_mmio_get_region(SYS_BUS_DEVICE(&mms->iotkit), 0);
> + object_property_set_link(OBJECT(msc), OBJECT(msc_downstream),
> + "downstream", &error_fatal);
> + object_property_set_link(OBJECT(msc), OBJECT(mms),
> + "idau", &error_fatal);
> + object_property_set_bool(OBJECT(msc), true, "realized", &error_fatal);
> +
> + qdev_connect_gpio_out_named(DEVICE(msc), "irq", 0,
> + qdev_get_gpio_in_named(iotkitdev,
> + "mscexp_status", i));
> + qdev_connect_gpio_out_named(iotkitdev, "mscexp_clear", i,
> + qdev_get_gpio_in_named(DEVICE(msc),
> + "irq_clear", 0));
> + qdev_connect_gpio_out_named(iotkitdev, "mscexp_ns", i,
> + qdev_get_gpio_in_named(DEVICE(msc),
> + "cfg_nonsec", 0));
> + qdev_connect_gpio_out(DEVICE(&mms->sec_resp_splitter),
> + ARRAY_SIZE(mms->ppc) + i,
> + qdev_get_gpio_in_named(DEVICE(msc),
> + "cfg_sec_resp", 0));
> + msc_upstream = sysbus_mmio_get_region(SYS_BUS_DEVICE(msc), 0);
> +
> + init_sysbus_child(OBJECT(mms), name, dma, sizeof(mms->dma[0]),
> TYPE_PL081);
> + object_property_set_link(OBJECT(dma), OBJECT(msc_upstream),
> + "downstream", &error_fatal);
> + object_property_set_bool(OBJECT(dma), true, "realized", &error_fatal);
> +
> + s = SYS_BUS_DEVICE(dma);
> + /* Wire up DMACINTR, DMACINTERR, DMACINTTC */
> + sysbus_connect_irq(s, 0, qdev_get_gpio_in_named(iotkitdev,
> + "EXP_IRQ", 58 + i * 3));
> + sysbus_connect_irq(s, 1, qdev_get_gpio_in_named(iotkitdev,
> + "EXP_IRQ", 56 + i * 3));
> + sysbus_connect_irq(s, 2, qdev_get_gpio_in_named(iotkitdev,
> + "EXP_IRQ", 57 + i * 3));
> +
> + return sysbus_mmio_get_region(s, 0);
> +}
> +
> static void mps2tz_common_init(MachineState *machine)
> {
> MPS2TZMachineState *mms = MPS2TZ_MACHINE(machine);
> @@ -299,13 +361,14 @@ static void mps2tz_common_init(MachineState *machine)
> &error_fatal);
>
> /* The sec_resp_cfg output from the IoTKit must be split into multiple
> - * lines, one for each of the PPCs we create here.
> + * lines, one for each of the PPCs we create here, plus one per MSC.
> */
> object_initialize(&mms->sec_resp_splitter,
> sizeof(mms->sec_resp_splitter),
> TYPE_SPLIT_IRQ);
> object_property_add_child(OBJECT(machine), "sec-resp-splitter",
> OBJECT(&mms->sec_resp_splitter), &error_abort);
> - object_property_set_int(OBJECT(&mms->sec_resp_splitter), 5,
> + object_property_set_int(OBJECT(&mms->sec_resp_splitter),
> + ARRAY_SIZE(mms->ppc) + ARRAY_SIZE(mms->msc),
> "num-lines", &error_fatal);
> object_property_set_bool(OBJECT(&mms->sec_resp_splitter), true,
> "realized", &error_fatal);
> @@ -406,10 +469,10 @@ static void mps2tz_common_init(MachineState *machine)
> }, {
> .name = "ahb_ppcexp1",
> .ports = {
> - { "dma0", make_unimp_dev, &mms->dma[0], 0x40110000, 0x1000 },
> - { "dma1", make_unimp_dev, &mms->dma[1], 0x40111000, 0x1000 },
> - { "dma2", make_unimp_dev, &mms->dma[2], 0x40112000, 0x1000 },
> - { "dma3", make_unimp_dev, &mms->dma[3], 0x40113000, 0x1000 },
> + { "dma0", make_dma, &mms->dma[0], 0x40110000, 0x1000 },
> + { "dma1", make_dma, &mms->dma[1], 0x40111000, 0x1000 },
> + { "dma2", make_dma, &mms->dma[2], 0x40112000, 0x1000 },
> + { "dma3", make_dma, &mms->dma[3], 0x40113000, 0x1000 },
> },
> },
> };
> @@ -490,12 +553,32 @@ static void mps2tz_common_init(MachineState *machine)
> armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename,
> 0x400000);
> }
>
> +static void mps2_tz_idau_check(IDAUInterface *ii, uint32_t address,
> + int *iregion, bool *exempt, bool *ns, bool
> *nsc)
> +{
> + /*
> + * The MPS2 TZ FPGA images have IDAUs in them which are connected to
> + * the Master Security Controllers. Thes have the same logic as
> + * is used by the IoTKit for the IDAU connected to the CPU, except
> + * that MSCs don't care about the NSC attribute.
> + */
> + int region = extract32(address, 28, 4);
> +
> + *ns = !(region & 1);
> + *nsc = false;
> + /* 0xe0000000..0xe00fffff and 0xf0000000..0xf00fffff are exempt */
> + *exempt = (address & 0xeff00000) == 0xe0000000;
> + *iregion = region;
> +}
> +
> static void mps2tz_class_init(ObjectClass *oc, void *data)
> {
> MachineClass *mc = MACHINE_CLASS(oc);
> + IDAUInterfaceClass *iic = IDAU_INTERFACE_CLASS(oc);
>
> mc->init = mps2tz_common_init;
> mc->max_cpus = 1;
> + iic->check = mps2_tz_idau_check;
> }
>
> static void mps2tz_an505_class_init(ObjectClass *oc, void *data)
> @@ -516,6 +599,10 @@ static const TypeInfo mps2tz_info = {
> .instance_size = sizeof(MPS2TZMachineState),
> .class_size = sizeof(MPS2TZMachineClass),
> .class_init = mps2tz_class_init,
> + .interfaces = (InterfaceInfo[]) {
> + { TYPE_IDAU_INTERFACE },
> + { }
> + },
> };
>
> static const TypeInfo mps2tz_an505_info = {
>
mps2-tz is now a piece of art...
Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
- Re: [Qemu-devel] [Qemu-arm] [PATCH 01/16] hw/watchdog/cmsdk_apb_watchdog: Implement CMSDK APB watchdog module, (continued)
- [Qemu-devel] [PATCH 12/16] hw/dma/pl080: Don't use CPU address space for DMA accesses, Peter Maydell, 2018/08/09
- [Qemu-devel] [PATCH 08/16] hw/misc/iotkit-secctl: Wire up registers for controlling MSCs, Peter Maydell, 2018/08/09
- [Qemu-devel] [PATCH 14/16] hw/dma/pl080: Correct bug in register address decode logic, Peter Maydell, 2018/08/09
- [Qemu-devel] [PATCH 16/16] hw/arm/mps2-tz: Create PL081s and MSCs, Peter Maydell, 2018/08/09
- Re: [Qemu-devel] [Qemu-arm] [PATCH 16/16] hw/arm/mps2-tz: Create PL081s and MSCs,
Philippe Mathieu-Daudé <=
- Re: [Qemu-devel] [Qemu-arm] [PATCH 00/16] arm: Implement MPS2 watchdogs and DMA, Peter Maydell, 2018/08/16