[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Rule-list] can't network install on 486
From: |
Luie delos Santos |
Subject: |
Re: [Rule-list] can't network install on 486 |
Date: |
Tue, 19 Mar 2002 14:08:59 +0800 |
> > > "Failed to insert 3c503 module.". Same error appears when I use
> > > HP10/100VG & Intel 8/16 (using eexpress & ne) LAN Adapters. I tried
> > > this on another 486 machine, using the same NICs, w/ the same results.
> > >
> > > What else do I need to try?
> >
> > We are well outside the realm of my experience here, sorry.
> > You're sure the driver disk is good? That would be my first guess.
> >
> > - -D
> Hi Luie...had exactly the same thing happening with my sbpcd module; had
> to supply the proper IO parameters. I think that's what's happening to
> your 3c503 (had to do that with another distro w/3c509), seems miniconda
> can't probe the 486 buses properly...last effort it couldn't find my
> mouse, or vid card....
I believe the problem is in the *drvnet.img* because A) I tested the same EISA
NICs on a Celeron machine and it produced the same error.
B) I also tested a PCI NIC (3c900) on the Celeron with the ff results:
1) when I use only the bootnet.img disk (w/c has support for 3c900) -- **no
problem**
2) when I select the driver from drvnet.img (using the same 3c900 driver) --
*error* "Failed to insert..."
luie
--
Get your free email from www.linuxmail.org
Powered by Outblaze
- [Rule-list] can't network install on 486, Luie delos Santos, 2002/03/17
- Re: [Rule-list] can't network install on 486, Luie delos Santos, 2002/03/18
- Re: [Rule-list] can't network install on 486, Luie delos Santos, 2002/03/18
- Re: [Rule-list] can't network install on 486, Luie delos Santos, 2002/03/18
- Re: [Rule-list] can't network install on 486,
Luie delos Santos <=
- Re: [Rule-list] can't network install on 486, Luie delos Santos, 2002/03/25
- Re: [Rule-list] can't network install on 486, Luie delos Santos, 2002/03/26