tlf-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Tlf-devel] Re: TLF AND HAMLIB


From: rein couperus PA0RCT
Subject: [Tlf-devel] Re: TLF AND HAMLIB
Date: Fri, 4 Apr 2003 16:20:47 +0200

Ooops, I think to include hamlib yo should say
./configure --enable-hamlib

The "enable" should do the trick, NOT NEED...

Rein

On Friday 04 April 2003 14:04, walter giovannini wrote:
> Yes all the libhamlib are ok and in the correct  location
> /usr/local/lib.
> walter cx7bf
> ----- Original Message -----
> From: "rein couperus PA0RCT" <address@hidden>
> To: "walter giovannini" <address@hidden>
> Cc: <address@hidden>
> Sent: Friday 4 de April de 2003 06:35 AM
> Subject: Re: TLF AND HAMLIB
>
> On Thursday 03 April 2003 17:32, you wrote:
> > Dear Rein.
> >
> > 1) i download a tlf and the hamlib.
> >
> > 2) install the hamlib with
> >
> >         ./configure
> >         make
> >         make install
> >         ldconfig
> >
> > 3) install the tlf
> >
> >         ./configure --need-hamlib
> >         make
> >         make install
> >
> > 4) Run TLF  in a new directory with the confuration file wpx and have a
> > message don't open the shared library lib....so.0 not file found ..etc.
>
> I remember having this problem at some point in time, but forgot what I did
> to
> resolve it.
> On my system these libraries are in /usr/local/lib
> Can you check if they are there? Look for  libhamlib*
>
> > 5) install tlf without the hamlib and work fine.
> >
> > 6) you can helpme i use RedHat 7.2
>
> Anybody from the hamlib community have any ideas?
>
> > 7) In the future from SSB contest we have pre-messages like cq , repeat
> > cq etc.. using the audio card. ??
>
> I should like to add this in the future.
>
> > 8) Another future you have some idea about the interface with terminal
> > units like PTC IIe or sound card RTTY software like mgfsk (linux and work
> > great with a sound card) to work RTTY contest.
>
> This one is low on the priority list. You can already use tlf as a terminal
> for an external tnc ( I use it with a TNC 2), but to link it to the
> contesting routines is quite a bit of work (and I work only CW :-)
> Maybe somebody steps forward to do this...
> (Dreaming is not forbidden :)
>
> > best regards and thanks for your time walter giovannini cx7bf

-- 
--
Email: address@hidden or address@hidden




reply via email to

[Prev in Thread] Current Thread [Next in Thread]