uisp-dev
[Top][All Lists]
Advanced
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Uisp-dev] Example command lines?

From: Bob Paddock
Subject: Re: [Uisp-dev] Example command lines?
Date: Tue, 17 Dec 2002 10:48:59 -0500
User-agent: KMail/1.4.3 

> Are sure that you've got the device in the correct socket (3000D3)?

Yes.

> Is the 6pin ribbon cable attached correctly (ISP6PIN to SPROG3)?

Yes.

> Is the SPI programming fuse on the 8515 enable (does it have that fuse,
> can't remember)?

I don't know, I'll have to fire up Studio and/or check the data sheet.

> Are you using SPI or high voltage parallel programming?

SPI.

> What do the jumper's on the stk500 look like?

Like they did when I took it out of the box, all the defaults.
I've not done any thing with the board because, so far I can't, unless I 
switch to Windows to run Studio.

When I ran Studio 4.06 it said that it needed to upgrade the board.
Is there any incompatibility issue there?
reply via email to
[Prev in Thread] Current Thread [Next in Thread]