Re: [Mldonkey-users] Problem: blacklisted ip from (too) more servers

[Roland Arendes]

Please have a look at this thread:

ah, damn. http://mldonkey.berlios.de/modules.php?name=Forums is down.

Ok, you have 2 possibilities.

1) Upgrade to at least 2.5.28g
   Get it from here: http://ftp.berlios.de/pub/mldonkey/spiralvoice/

2) Upgrade to at least 2.5.16t and patch with this:
   http://www.arendes.de/roland/patch_pack16ta (fixes 16t with 16.50 servers)

bye
roland


> Hi,
>
> When I connect with mldonkey, the majorty of servers refuse me because my
> ip
> is blacklisted.
>
> I want to know:
>
> 1) WHY it happens and
> 2) how can I drop for their blacklist.
> 3) Is it due to mldonkey configurations?
>
> Thanks,
> Xan.
>
> My downloads.ini:
> If you need more config. files, say it me.
>
>
>     (************************************)
>     (*   Never edit options files when  *)
>     (*       the daemon is running      *)
>     (************************************)
>     (* SECTION : Main *)
>     (* Main options *)
>     (************************************)
>
>
>
>  (* small name of client *)
>  client_name = -------
>
>
>     (************************************)
>     (* SECTION : Interfaces *)
>     (* Options to control ports used by mldonkey interfaces *)
>     (************************************)
>
>
>
>  (* list of IP address allowed to connect to the core via telnet/GUI/WEB
>  list separated by spaces, wildcard=255 ie: use 192.168.0.255 for
> 192.168.0.*
> *)
>  allowed_ips = [
>   "127.0.0.1";]
>
>  (* port for Graphical Interfaces *)
>  gui_port = 4001
>
>  (* port for GiFT Graphical Interfaces interaction *)
>  gift_port = 1213
>
>  (* The port used to connect to your client with a WEB browser *)
>  http_port = 4080
>
>  (* port for user interaction *)
>  telnet_port = 4000
>
>
>     (************************************)
>     (* SECTION : Bandwidth *)
>     (*  *)
>     (************************************)
>
>
>
>  (* The maximal upload rate you can tolerate on your link in kBytes/s (0 =
> no
> limit)
>    The limit will apply on all your connections (clients and servers) and
> both
>  control and data messages. *)
>  max_hard_upload_rate = 10
>
>  (* The maximal download rate you can tolerate on your link in kBytes/s (0
> =
> no limit)
>    The limit will apply on all your connections (clients and servers) and
> both
>  control and data messages. *)
>  max_hard_download_rate = 40
>
>  (* Maximal number of opened connections *)
>  max_opened_connections = 200
>
>  (* How many slots can be used for upload *)
>  max_upload_slots = 5
>
>  (* Set this to true if you want to have dynamic upload slot allocation
> (experimental) *)
>  dynamic_slots = true
>
>  (* Maximal number of connections that can be opened per second *)
>  max_connections_per_second = 10
>
>  (* list of IP addresses allowed to connect to the core with no limit on
>  upload/download and upload slots.  List separated by spaces, wildcard=255
>  ie: use 192.168.0.255 for 192.168.0.*  *)
>  nolimit_ips = [
>   "127.0.0.1";]
>
>  (* This option enables MLdonkey to always read as much data as possible
>    from a channel, but use more CPU as it must then copy the data in the
>      channel buffer. *)
>  copy_read_buffer = true
>
>
>     (************************************)
>     (* SECTION : Networks *)
>     (* Networks options *)
>     (************************************)
>
>
>
>  (* Set to true if you also want mldonkey to run as an overnet client
> (enable_donkey must be true) *)
>  enable_overnet = true
>
>  (* Set to true if you also want mldonkey to run as an kademlia client
> (enable_donkey must be true, and only experimental) *)
>  enable_kademlia = true
>
>  (* Set to true if you also want mldonkey to run with edonkey servers
> (enable_donkey must be true, and only experimental) *)
>  enable_servers = true
>
>  (* Set to true if you also want mldonkey to run as an Bittorrent client
> *)
>  enable_bittorrent = true
>
>  (* Set to true if you also want mldonkey to run as a donkey client *)
>  enable_donkey = true
>
>  (* Set to true if you also want mldonkey to run as a napster client
> (experimental) *)
>  enable_opennap = false
>
>  (* Set to true if you also want mldonkey to run as a soulseek client
> (experimental) *)
>  enable_soulseek = false
>
>  (* Set to true if you also want mldonkey to run as a gnutella1 sub node
> (experimental) *)
>  enable_gnutella = false
>
>  (* Set to true if you also want mldonkey to run as a gnutella2 sub node
> (experimental) *)
>  enable_gnutella2 = false
>
>  (* Set to true if you also want mldonkey to run as a Fasttrack sub node
> (experimental) *)
>  enable_fasttrack = false
>
>  (* Set to true if you also want mldonkey to run as a direct-connect node
> (experimental) *)
>  enable_directconnect = true
>
>  (* Set to true if you also want mldonkey to download HTTP files
> (experimental) *)
>  enable_fileTP = false
>
>
>     (************************************)
>     (* SECTION : Network Config *)
>     (* Network config options *)
>     (************************************)
>
>
>
>  (* The last IP address used for this client *)
>  client_ip = "-------"
>
>  (* Use the IP specified by 'client_ip' instead of trying to determine it
>      ourself. Don't set this option to true if you have dynamic IP. *)
>  force_client_ip = false
>
>  (* A list of lines to download on the WEB: each line has
>      the format: (kind, period, url), where kind is either
>      'server.met' (for a server.met file), or 'comments.met' for
>      a file of comments, and period is the period between updates
>      (in hours), and url is the url of the file to download.
>      IMPORTANT: Put the URL and the kind between quotes.
>      EXAMPLE:
>   web_infos = [
>    ('server.met', 24,
> 'http://www.primusnet.ch/users/komintern/ed2k/min/server.met');
>    ('guarding.p2p', 48,
> 'http://homepage.ntlworld.com/tim.leonard1/guarding.p2p')
>
>   ]
>     *)
>  web_infos = [
>   ("server.met", 1,
> "http://ocbmaurice.dyndns.org/pl/slist.pl/server.met?download/server-max.met";);
>   ("server.met", 1, "http://canostra/servers.met/server-xverger.met";);
>   ("server.met", 1, "http://canostra/servers.met/server-daruz.met";);
>   ("server.met", 2,
> "http://ocbmaurice.dyndns.org/pl/slist.pl/server.met?download/server-best.met";);
>   ("server.met", 2, "http://www.srv1000.com/azz/server.met";);
>   ("server.met", 2, "http://www.edonkey2000.com/server.met";);
>   ("server.met", 2, "http://web2k2.vivelared.com/server.met";);
>   ("server.met", 2,
> "http://users.servicios.retecal.es/ljpadillam/Baltab/server.met";);
>   ("server.met", 2, "http://telefonica.net/web/dobleteweb/server.met";);
>   ("server.met", 2, "http://fr.perez0001.eresmas.net/server.met";);
>   ("server.met", 2, "ftp://sucarab.dyndns.org/server.met";);
>   ("server.met", 2, "http://web2k2.vivelared.com/server.met";);
>   ("server.met", 2,
> "http://www.alldivx.de/servermet2.php?load=max&trace=30409359.777778";);
>   ("server.met", 2,
> "http://www.alldivx.de/servermet2.php?load=special&trace=30409359.777778";);
>   ("server.met", 2,
> "http://wise3.worldonline.es/~wbiz102498-w1/server_met/server.met";);
>   ("server.met", 2,
> "http://www.telefonica.net/web/dobleteweb/server.met";);
>   ("server.met", 2, "http://franxd.en.eresmas.com/server.met";);
>   ("server.met", 2, "http://web2k2.vivelared.com/server.met";);
>   (ocl, 2,
> "http://users.servicios.retecal.es/ljpadillam/Baltab/staticservers.dat";);
>   (ocl, 2,
> "http://members.lycos.co.uk/appbyhp2/FlockHelpApp/contact-files/contact.ocl";);
>   ("guarding.p2p", 2, "http://www.bluetack.co.uk/config/antip2p.txt";);
>   (rss, 3, "http://www.ed2k-it.com/forum/news_rss.php";);
>   (rss, 3, "http://www.torrents.co.uk/backend.php";);
>   (rss, 3, "http://varchars.com/rss/suprnova-movies.rss";);]
>
>  (* Direct HTTP queries to HTTP proxy *)
>  http_proxy_server = ""
>
>  (* Port of HTTP proxy *)
>  http_proxy_port = 8080
>
>  (* Direct TCP connections to HTTP proxy (the proxy should support
> CONNECT) *)
>  http_proxy_tcp = false
>
>
>     (************************************)
>     (* SECTION : HTML mods *)
>     (* Options to configure HTML mode *)
>     (************************************)
>
>
>
>       (* bw_stats refresh delay (seconds) *)
>  html_mods_bw_refresh_delay = 11
>
>       (* html_mods_theme to use (located in relative html_themes/<theme_name>
> directory, leave blank to use internal theme *)
>  html_mods_theme = ""
>
>
>     (************************************)
>     (* SECTION : Download *)
>     (* Download options *)
>     (************************************)
>
>
>
>  (* Set to false if you don't want mldonkey to automatically put completed
> files in incoming directory *)
>  auto_commit = true
>
>  (* The maximal number of files in Downloading state (other ones are
> Queued)
> *)
>  max_concurrent_downloads = 60
>
>  (* The maximal length of zero bytes between non-zero bytes in a file that
>  should be interpreted as downloaded during a recovery *)
>  max_recover_zeroes_gap = 16
>
>  (* A command that is called when a file is completely
>      downloaded. Arguments are: <file_name on disk> <md4> <size> *)
>  file_completed_cmd = ""
>
>  (* The command which is called when a download is started. Arguments
>       are '-file <num>' *)
>  file_started_cmd = ""
>
>
>     (************************************)
>     (* SECTION : Startup *)
>     (* Startup options *)
>     (************************************)
>
>
>
>       (* The login of the user you want mldonkey to run as, after the ports
>         have been bound (can be use not to run with root priviledges when
>       a port < 1024 is needed) *)
>  run_as_user = ""
>
>  (* The UID of the user (0=disabled) you want mldonkey to run as, after
> the
> ports
>    have been bound (can be use not to run with root priviledges when
>  a port < 1024 is needed) *)
>  run_as_useruid = 0
>
>  (* Ask for GUI start *)
>  ask_for_gui = false
>
>  (* Automatically Start the GUI *)
>  start_gui = false
>
>  (* Should MLdonkey try to recover downloads of files in temp/ at startup
> *)
>  recover_temp_on_startup = true
>
>
>     (************************************)
>     (* SECTION : Mail *)
>     (* Mail options *)
>     (************************************)
>
>
>
>       (* The mail server you want to use (must be SMTP). Use hostname or IP
> address
> *)
>  smtp_server = "127.0.0.1"
>
>       (* The port to use on the mail server (default 25) *)
>  smtp_port = 25
>
>       (* Your e-mail if you want to receive mails when downloads are completed
> *)
>  mail = ""
>
>       (* Does your mail-server need <...> around addresses *)
>  add_mail_brackets = false
>
>       (* Send filename in mail subject *)
>  filename_in_subject = true
>
>       (* Put a prefix for the filename here which shows up in the notification
> mail
> *)
>  url_in_mail = ""
>
>
>     (************************************)
>     (* SECTION : Paths *)
>     (* Paths options *)
>     (************************************)
>
>
>
>  (* The directory where temporary files should be put *)
>  temp_directory = "/home/xan/.xMule/Temp"
>
>  (* The directory where downloaded files should be moved after commit *)
>  incoming_directory = "/home/xan/.xMule/Incoming"
>
>  (* Sharing strategy the share command will use when none is specified *)
>  default_sharing_strategy = all_files
>
>  (* Directories where files will be shared *)
>  shared_directories = [
>   {     dirname = shared
>      networks = []
>      strategy = all_files
>      priority = 0
> };]
>
>
>     (************************************)
>     (* SECTION : Security *)
>     (* Security options *)
>     (************************************)
>
>
>
>       (* Commands that you are allowed to be call from the interface. These
>       commands should short, so that the core is not blocked more than
> necessary.
> *)
>  allowed_commands = [
>   (df, df);
>   (ls, "ls incoming");]
>
>       (* Allow you to use any command with ! in the interface instead of only
> the
>       ones in allowed_commands *)
>  allow_any_command = false
>
>       (* The users that are defined on this core. The default user is
>  called 'admin', and uses an empty password. To create new users,
>  login as admin in mldonkey, and use the 'add_user' command. *)
>  users = [
>   (admin, "31D6CFE0D16AE931B73C59D7E0C089C0");]
>
>  (* Allow others to browse our share list (0: none, 1: friends only, 2:
> everyone *)
>  allow_browse_share = 2
>
>  (* Regexp of messages to filter out, example: string1\|string2\|string3
> *)
>  messages_filter = "Your client is connecting too fast"
>
>
>     (************************************)
>     (* SECTION : Other *)
>     (* Other options *)
>     (************************************)
>
>
>
>  (* (experimental) *)
>  save_results = 0
>
>  (* filters on replies (replies will be kept). *)
>  filters = ""
>
>       (* Buffer writes and flush after buffer_writes_delay seconds
> (experimental)
> *)
>  buffer_writes = false
>
>       (* build statistics about eMule mods *)
>  emule_mods_count = false
>
>       (* show all eMule mods in statistics *)
>  emule_mods_showall = false
>
>       (* The IP address used to bind the p2p clients *)
>  client_bind_addr = "0.0.0.0"
>
>
>
> (*****************************************************************)
> (*                                                               *)
> (*                       ADVANCED OPTIONS                        *)
> (*                                                               *)
> (*        All the options after this line are for the expert     *)
> (*        user. Do not modify them if you are not   sure.        *)
> (*                                                               *)
> (*****************************************************************)
>
>
>
>
>
>     (************************************)
>     (* SECTION : Interfaces FOR EXPERTS *)
>     (* Options to control ports used by mldonkey interfaces *)
>     (************************************)
>
>
>
>  (* The IP address used to bind the http server *)
>  http_bind_addr = "0.0.0.0"
>
>  (* The IP address used to bind the gui server *)
>  gui_bind_addr = "0.0.0.0"
>
>  (* The IP address used to bind the telnet server *)
>  telnet_bind_addr = "0.0.0.0"
>
>  (* Should *all* sources for a file be shown on HTML/telnet vd <num> *)
>  print_all_sources = false
>
>  (* Improved telnet interface *)
>  improved_telnet = true
>
>
>     (************************************)
>     (* SECTION : Bandwidth FOR EXPERTS *)
>     (*  *)
>     (************************************)
>
>
>
>       (* The delay in milliseconds to wait in the event loop. Can be decreased
> to
>       increase the bandwidth usage, or increased to lower the CPU usage. *)
>  loop_delay = 30
>
>
>     (************************************)
>     (* SECTION : Networks FOR EXPERTS *)
>     (* Networks options *)
>     (************************************)
>
>
>
>       (* Set to true if you also want mldonkey to run as an audiogalaxy
> satellite
> (experimental) *)
>  enable_audiogalaxy = false
>
>       (* Set to true if you also want mldonkey to run as a OpenFT sub node
> (experimental) *)
>  enable_openft = false
>
>
>     (************************************)
>     (* SECTION : Network Config FOR EXPERTS *)
>     (* Network config options *)
>     (************************************)
>
>
>
>  (* URLs of RSS feeds *)
>  rss_feeds = []
>
>  (* IP blocking list filename (peerguardian format) *)
>  ip_blocking = "./guarding.p2p"
>
>  (* The size of the header of a TCP/IP packet on your connection (ppp adds
>      14 bytes sometimes, so modify to take that into account) *)
>  tcpip_packet_size = 40
>
>  (* The size of the MTU of a TCP/IP packet on your connection *)
>  mtu_packet_size = 1500
>
>  (* The size of the frame packet on your network (on my cable link, it is
> 250)
> *)
>  packet_frame_size = 250
>
>  (* The size of the minimal packet you want mldonkey to send when data is
>  available on the connection *)
>  minimal_packet_size = 600
>
>       (* URL where mldonkey can download update information on the network *)
>  network_update_url = ""
>
>       (* IP:port of the network redirector *)
>  redirector = "129.104.11.42:3999"
>
>
>     (************************************)
>     (* SECTION : HTML mods FOR EXPERTS *)
>     (* Options to configure HTML mode *)
>     (************************************)
>
>
>
>       (* Whether to use the modified WEB interface *)
>  html_mods = true
>
>       (* Which html_mods style to use (set with html_mods_style command) *)
>  html_mods_style = 0
>
>       (* Whether to use human readable GMk number format *)
>  html_mods_human_readable = true
>
>       (* Whether to use relative availability in the WEB interface *)
>  html_mods_use_relative_availability = true
>
>       (* Whether to display the Net column in vd output *)
>  html_mods_vd_network = true
>
>  (* Whether to display the Active Sources column in vd output *)
>  html_mods_vd_active_sources = true
>
>  (* Whether to display the Age column in vd output *)
>  html_mods_vd_age = true
>
>  (* Whether to display the Last column in vd output *)
>  html_mods_vd_last = true
>
>  (* Whether to display the Priority column in vd output *)
>  html_mods_vd_prio = true
>
>  (* Whether to display the Queues in vd # output *)
>  html_mods_vd_queues = true
>
>  (* Change height of download indicator bar in vd output *)
>  html_vd_barheight = 2
>
>  (* Whether to display the pending slots in uploaders command *)
>  html_mods_show_pending = true
>
>  (* Whether to load the mldonkey_messages.ini file (false=use internal
> settings) *)
>  html_mods_load_message_file = false
>
>       (* Maximum chat messages to log in memory *)
>  html_mods_max_messages = 50
>
>       (* Whether to use checkboxes in the WEB interface for download list *)
>  html_checkbox_vd_file_list = true
>
>       (* Whether to use checkboxes in the WEB interface for search result list
> *)
>  html_checkbox_search_file_list = false
>
>       (* Use gzip compression on web pages *)
>  html_use_gzip = false
>
>
>     (************************************)
>     (* SECTION : Debug FOR EXPERTS *)
>     (* Debug options *)
>     (************************************)
>
>
>
>       (* If this option is set, IP addresses on the local network are allowed
>       (only for debugging) *)
>  allow_local_network = false
>
>       (* size of log in number of records *)
>  log_size = 300
>
>  (* The file in which you want mldonkey to log its debug messages. If you
>    set this option, mldonkey will log this info in the file until you use
> the
>  'close_log' command. The log file may become very large. You can
>      also enable logging in a file after startup using the 'log_file'
> command.
> *)
>  log_file = ""
>
>  (* A space-separated list of keywords. Each keyword triggers
>    printing information on the corresponding messages:
>    mc : debug client messages
>    mct : debug emule clients tags
>    ms : debug server messages
>    connect : debug connections
>    net : debug net
>    verb : debug other
>    loc : debug source research
>    sp : debug source propagation
>    sm : debug source management
>    do : some download warnings
>    up : some upload warnings
>    unk : unknown messages
>    ov : overnet
>    share: debug sharing
>    md4 : md4 computation
>         udp : udp messages
>         hc: http_client messages
>         hs: http_server messages
>        *)
>  verbosity = ""
>
>
>     (************************************)
>     (* SECTION : Download FOR EXPERTS *)
>     (* Download options *)
>     (************************************)
>
>
>
>       (* Set to true if you want MLdonkey to emulate sparse files on your 
> disk.
>         Files will use less space, but <preview> and <recover> won't work
> anymore.
>         Works only on Edonkey plugin. EXPERIMENTAL. *)
>  emulate_sparsefiles = false
>
>
>     (************************************)
>     (* SECTION : Startup FOR EXPERTS *)
>     (* Startup options *)
>     (************************************)
>
>
>
>  (* How many megabytes should MLdonkey keep for saving configuration
> files. *)
>  config_files_security_space = 10
>
>  (* Send an UDP packet to a central servers with the list of servers you
>    are currently connected to, for the central server to be able to
>      generate accurate server lists. *)
>  propagate_servers = false
>
>
>     (************************************)
>     (* SECTION : Paths FOR EXPERTS *)
>     (* Paths options *)
>     (************************************)
>
>
>
>  (* The upload prio of the incoming directory *)
>  incoming_directory_prio = 0
>
>  (* Name of program used for preview (first arg is local filename, second
> arg
>           is name of file as searched on eDonkey *)
>  previewer = mldonkey_previewer
>
>       (* Directory where mldonkey binaries are installed *)
>  mldonkey_bin = "."
>
>       (* Name of GUI to start *)
>  mldonkey_gui = "./mlgui"
>
>
>     (************************************)
>     (* SECTION : MLChat FOR EXPERTS *)
>     (* MLChat options *)
>     (************************************)
>
>
>
>  (* port of the external chat application *)
>  chat_app_port = 5036
>
>  (* hostname of the external chat application *)
>  chat_app_host = localhost
>
>  (* port used by the external chat application to use the core as a proxy
> *)
>  chat_port = 4002
>
>  (* The IP address used to bind the chat server *)
>  chat_bind_addr = "0.0.0.0"
>
>  (* the id to use for communicating with the core console through chat
> interface *)
>  chat_console_id = "donkey console"
>
>  (* use the chat to indicate when a file has been downloaded *)
>  chat_warning_for_downloaded = true
>
>
>     (************************************)
>     (* SECTION : Other FOR EXPERTS *)
>     (* Other options *)
>     (************************************)
>
>
>
>  (* keep seen files in history to allow local search (can be expensive in
> memory) *)
>  use_file_history = false
>
>  (* Buffer writes and flush after buffer_writes_delay seconds
> (experimental)
> *)
>  buffer_writes_delay = 30.000000
>
>  (* Flush buffers if buffers exceed buffer_writes_threshold kB
> (experimental)
> *)
>  buffer_writes_threshold = 1024
>
>  (* The conversions to apply on characters depending on their ASCII code
> *)
>  filename_conversions = [
>   (228, ae);
>   (246, oe);
>   (252, ue);
>   (223, ss);
>   (196, Ae);
>   (214, Oe);
>   (220, Ue);]
>
>  (* Timeout on client connections when not queued *)
>  client_timeout = 40.000000
>
>  (* The size of the buffer between the client and its GUI. Can be useful
>  to increase when the connection between them has a small bandwith *)
>  interface_buffer = 1000000
>
>  (* The size long names will be shortened to in the interface *)
>  max_name_len = 50
>
>  (* The size long client names will be shortened to in the interface *)
>  max_client_name_len = 25
>
>  (* Is the default terminal an ANSI terminal (escape sequences can be
> used) *)
>  term_ansi = true
>
>  (* Delay between updates to the GUI *)
>  update_gui_delay = 1.000000
>
>  (* The realm shown when connecting with a WEB browser *)
>  http_realm = MLdonkey
>
>  (* This option controls whether the WEB interface should use frames or
> not *)
>  use_html_frames = true
>
>  (* The height of the command frame in pixel (depends on your screen and
> browser sizes) *)
>  commands_frame_height = 42
>
>  (* Message printed at startup (automatically downloaded from the previous
>      URL directory *)
>  motd_html = "<pre>
>
> ***************************************************************************
>
>                          Welcome to MLdonkey
>
>                          The current stable version is 2.5.22 <br>
>
>                          Please, ask your friends using old versions to
>                             upgrade as soon as possible.
> ***************************************************************************
> </pre>
> "
>
>  (* Force compaction every <n> hours (in [1..24]) *)
>  compaction_delay = 2
>
>  (* The delay between reloads of the vd output in the WEB interface *)
>  vd_reload_delay = 120
>
>  (* (experimental) *)
>  dp500_pclink = false
>
>  (* (experimental) *)
>  dp500_port = 8000
>
>  (* (experimental) *)
>  dp500_buffer = 2000000
>
>  (* (experimental) *)
>  dp500_directory = dp500
>
>  (* Should the MLSUBMIT.REG file be created *)
>  create_mlsubmit = true
>
>  (* Size of the minor heap in kB *)
>  minor_heap_size = 32
>
>  (* The minimal delay between two connections to the same client (in
> seconds)
> *)
>  min_reask_delay = 600
>
>  (* Whether to display results already downloaded *)
>  display_downloaded_results = true
>
>  (* Minimal number of results for filter form to appear *)
>  filter_table_threshold = 50
>
>  (* Maximal size of the buffers of a client *)
>  client_buffer_size = 500000
>
>  (* The delay between two saves of the 'downloads.ini' file (default is 15
> minutes) *)
>  save_options_delay = 900.000000
>
>  (* timeout when connecting to a server *)
>  server_connection_timeout = 15.000000
>
>  (* The delay between one glance at a file and another *)
>  download_sample_rate = 1.000000
>
>  (* How many samples go into an estimate of transfer rates *)
>  download_sample_size = 10
>
>  (* This option defines a set of date at which some commands have to be
> executed.
>    For each tuple, the first argument is a list of week days (from 0 to
> 6),
>    the second is a list of hours (from 0 to 23) and the last one a command
> to
>    execute. Can be used with 'pause all' and 'resume all' for example to
>    resume and pause downloads automatically for the night. *)
>  calendar = []
>
>  (* The percentage of free memory before a compaction is triggered *)
>  compaction_overhead = 25
>
>  (* Maximal number of results displayed for a search *)
>  max_displayed_results = 1000
>
>  (* (internal option) *)
>  options_version = 2
>
>
> _______________________________________________
> Mldonkey-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/mldonkey-users
>
>