RE: Protocol for a SIEVED ?

[Jorge Bastos]

Hi Martin,

I've confirmed this, when it gets zombie, monit doesn't restart it.
The TCP port stays open, but no response is obtained.

What can I do to help you on this?

> -----Original Message-----
> From: address@hidden
> [mailto:address@hidden On
> Behalf Of Martin Pala
> Sent: quinta-feira, 6 de Novembro de 2014 21:59
> To: This is the general mailing list for monit
> Subject: Re: Protocol for a SIEVED ?
> 
> If the port test succeeded (no errors), then it seems that the port
> 2000 is handled by some other process (not sieved), or that the sieved
> was able to accept TCP connection and it failed later on protocol
> level. Please can you check with which process listens on this port?:
> 
>       sudo lsof +c 0 -P -iTCP -sTCP:LISTEN | grep 2000   # the PID will
> be in the second column
> 
> vs. the PID of the sieved process:
> 
>       cat /rundbmail/dbmail-timsieved.pid
> 
> If it accepted TCP connection but failed to handle requests, you'll
> need to use more specific protocol test ... you can use generic
> send/expect (http://mmonit.com/monit/documentation/monit.html#GENERIC-
> SEND-EXPECT) or we can implement native test.
> 
> 
> 
> 
> > On 06 Nov 2014, at 22:40, Jorge Bastos <address@hidden>
> wrote:
> >
> > Martin,
> >
> > There’s nothing on the logs, only what I show below but because I
> killed the process manually,
> >
> > check process dbmail-timsieved with pidfile /rundbmail/dbmail-
> timsieved.pid
> >      every 1 cycles
> >      group dbmail
> >      start program = "/etc/init.d/dbmail-timsieved start"
> >      stop  program = "/etc/init.d/dbmail-timsieved stop"
> >      if failed port 2000 type tcp with timeout 20 seconds within 1
> cycles then restart
> >
> >
> > [WET Nov  6 21:02:34] error    : 'dbmail-timsieved' process is not
> running
> > [WET Nov  6 21:02:35] info     : 'dbmail-timsieved' trying to restart
> > [WET Nov  6 21:02:35] info     : 'dbmail-timsieved' start:
> /etc/init.d/dbmail-timsieved
> > [WET Nov  6 21:03:35] info     : 'dbmail-timsieved' process is
> running with pid 31151
> >
> > From: address@hidden
> [mailto:address@hidden On
> Behalf Of Martin Pala
> > Sent: quinta-feira, 6 de Novembro de 2014 21:16
> > To: This is the general mailing list for monit
> > Subject: Re: Protocol for a SIEVED ?
> >
> > Hi,
> >
> > please can you post snip of the full service check + related monit
> log?
> >
> > Regards,
> > Martin
> >
> >
> >> On 06 Nov 2014, at 21:54, Jorge Bastos <address@hidden>
> wrote:
> >>
> >> Hi,
> >>
> >> Which protocol should i use for a SIEVED server?
> >> I’m using it with:
> >>
> >> if failed port 2000 type tcp with timeout 20 seconds within 1 cycles
> then restart
> >>
> >> But it got zombie and monit didn’t restarted it.
> >>
> >> Thanks,
> >> --
> >> To unsubscribe:
> >> https://lists.nongnu.org/mailman/listinfo/monit-general
> >
> > --
> > To unsubscribe:
> > https://lists.nongnu.org/mailman/listinfo/monit-general
> 
> 
> --
> To unsubscribe:
> https://lists.nongnu.org/mailman/listinfo/monit-general