[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Protux-devel] Protux (CVS) working again,
From: |
Reinhard Amersberger |
Subject: |
Re: [Protux-devel] Protux (CVS) working again, |
Date: |
Wed, 26 May 2004 12:09:41 +0200 |
address@hidden schrieb am 26.05.04 11:51:15:
>
> > btw - play back is possible when using other alsa audio applications.
> > so it seems to be a MADM related problem ?!?
>
> Don't get it. MADM is supposed to continue even if another program is using
> the audio card. In case there's no programming which has claimed the
> audiocard MADM will detect all buses and you can use them, if the card is in
> use, MADM will print a warning on console, and continues starting without
> support for the audio card bus which is in use.
> In other words, it should have nothing to do with the plughw problem etc. :-)
ok, but it seems that there is no alsa related problem on my machine since
other apps can use the available busses, right?
btw - do you need more infos?
greetings
reinhard
> Best wishes,
>
> Remon
>
> >
> > greetings
> > reinhard
> >
> > address@hidden, address@hidden schrieb am 25.05.04 00:27:29:
> > > Am Monday 24 May 2004 19:29 schrieb Remon Sijrier:
> > > > > hw detects just a few sample rates whereby plughw detects ALL to be
> > > > > usable for protux, which cannot be possible as far as I understand
> > > > > ...
> > > >
> > > > plughw is a software layer which converts any used sample rate /
> > > > bitdepth to a sample rate / bitdepth the audio card can handle, so yes,
> > > > even if you want to record/play in 64 bit, 192 kHz it is supported, but
> > > > the actual values are bound by what your audiocard supports.
> > > >
> > > > > also no MTA is created when using plughw.
> > > >
> > > > Sounds strange, maybe I can get a clue when you send the output.
> > > >
> > > >
> > > > Success,
> > > >
> > > > Remon
> > >
> > > ok, so please examine the attached files and good luck!
> > >
> > > greetings
> > > reinhard
> > >
> > > <hr>
> > > _______________________________________________
> > > Protux-devel mailing list
> > > address@hidden
> > > http://mail.nongnu.org/mailman/listinfo/protux-devel
> >
> > _______________________________________________
> > Protux-devel mailing list
> > address@hidden
> > http://mail.nongnu.org/mailman/listinfo/protux-devel
>
>
> _______________________________________________
> Protux-devel mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/protux-devel
- Re: [Protux-devel] Protux (CVS) working again,, Reinhard Amersberger, 2004/05/24
- Re: [Protux-devel] Protux (CVS) working again,, Reinhard Amersberger, 2004/05/26
- Re: [Protux-devel] Protux (CVS) working again,,
Reinhard Amersberger <=
- Re: [Protux-devel] Protux (CVS) working again,, Reinhard Amersberger, 2004/05/27
- Re: [Protux-devel] Protux (CVS) working again,, Reinhard Amersberger, 2004/05/29