qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[RFC PATCH v2 11/67] Hexagon register fields


From: Taylor Simpson
Subject: [RFC PATCH v2 11/67] Hexagon register fields
Date: Fri, 28 Feb 2020 10:43:07 -0600

Declare bitfields within registers such as user status register (USR)

Signed-off-by: Taylor Simpson <address@hidden>
---
 target/hexagon/reg_fields.h     |  40 +++++++++++++++
 target/hexagon/reg_fields_def.h | 109 ++++++++++++++++++++++++++++++++++++++++
 target/hexagon/reg_fields.c     |  28 +++++++++++
 3 files changed, 177 insertions(+)
 create mode 100644 target/hexagon/reg_fields.h
 create mode 100644 target/hexagon/reg_fields_def.h
 create mode 100644 target/hexagon/reg_fields.c

diff --git a/target/hexagon/reg_fields.h b/target/hexagon/reg_fields.h
new file mode 100644
index 0000000..cf168f0
--- /dev/null
+++ b/target/hexagon/reg_fields.h
@@ -0,0 +1,40 @@
+/*
+ *  Copyright(c) 2019-2020 Qualcomm Innovation Center, Inc. All Rights 
Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef HEXAGON_REG_FIELDS_H
+#define HEXAGON_REG_FIELDS_H
+
+#define NUM_GEN_REGS 32
+
+typedef struct {
+    const char *name;
+    int offset;
+    int width;
+    const char *description;
+} reg_field_t;
+
+extern reg_field_t reg_field_info[];
+
+enum reg_fields_enum {
+#define DEF_REG_FIELD(TAG, NAME, START, WIDTH, DESCRIPTION) \
+    TAG,
+#include "reg_fields_def.h"
+    NUM_REG_FIELDS
+#undef DEF_REG_FIELD
+};
+
+#endif
diff --git a/target/hexagon/reg_fields_def.h b/target/hexagon/reg_fields_def.h
new file mode 100644
index 0000000..20ccc3e
--- /dev/null
+++ b/target/hexagon/reg_fields_def.h
@@ -0,0 +1,109 @@
+/*
+ *  Copyright(c) 2019-2020 Qualcomm Innovation Center, Inc. All Rights 
Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * For registers that have individual fields, explain them here
+ *   DEF_REG_FIELD(tag,
+ *                 name,
+ *                 bit start offset,
+ *                 width,
+ *                 description
+ */
+
+/* USR fields */
+DEF_REG_FIELD(USR_OVF,
+    "ovf", 0, 1,
+    "Sticky Saturation Overflow - "
+    "Set when saturation occurs while executing instruction that specifies "
+    "optional saturation, remains set until explicitly cleared by a USR=Rs "
+    "instruction.")
+DEF_REG_FIELD(USR_FPINVF,
+    "fpinvf", 1, 1,
+    "Floating-point IEEE Invalid Sticky Flag.")
+DEF_REG_FIELD(USR_FPDBZF,
+    "fpdbzf", 2, 1,
+    "Floating-point IEEE Divide-By-Zero Sticky Flag.")
+DEF_REG_FIELD(USR_FPOVFF,
+    "fpovff", 3, 1,
+    "Floating-point IEEE Overflow Sticky Flag.")
+DEF_REG_FIELD(USR_FPUNFF,
+    "fpunff", 4, 1,
+    "Floating-point IEEE Underflow Sticky Flag.")
+DEF_REG_FIELD(USR_FPINPF,
+    "fpinpf", 5, 1,
+    "Floating-point IEEE Inexact Sticky Flag.")
+
+DEF_REG_FIELD(USR_LPCFG,
+    "lpcfg", 8, 2,
+    "Hardware Loop Configuration: "
+    "Number of loop iterations (0-3) remaining before pipeline predicate "
+    "should be set.")
+DEF_REG_FIELD(USR_PKTCNT_U,
+    "pktcnt_u", 10, 1,
+    "Enable packet counting in User mode.")
+DEF_REG_FIELD(USR_PKTCNT_G,
+    "pktcnt_g", 11, 1,
+    "Enable packet counting in Guest mode.")
+DEF_REG_FIELD(USR_PKTCNT_M,
+    "pktcnt_m", 12, 1,
+    "Enable packet counting in Monitor mode.")
+DEF_REG_FIELD(USR_HFD,
+    "hfd", 13, 2,
+    "Two bits that let the user control the amount of L1 hardware data cache "
+    "prefetching (up to 4 cache lines): "
+    "00: No prefetching, "
+    "01: Prefetch Loads with post-updating address mode when execution is "
+        "within a hardware loop, "
+    "10: Prefetch any hardware-detected striding Load when execution is within 
"
+        "a hardware loop, "
+    "11: Prefetch any hardware-detected striding Load.")
+DEF_REG_FIELD(USR_HFI,
+    "hfi", 15, 2,
+    "Two bits that let the user control the amount of L1 instruction cache "
+    "prefetching. "
+    "00: No prefetching, "
+    "01: Allow prefetching of at most 1 additional cache line, "
+    "10: Allow prefetching of at most 2 additional cache lines.")
+
+DEF_REG_FIELD(USR_FPRND,
+    "fprnd", 22, 2,
+    "Rounding Mode for Floating-Point Instructions: "
+    "00: Round to nearest, ties to even (default), "
+    "01: Toward zero, "
+    "10: Downward (toward negative infinity), "
+    "11: Upward (toward positive infinity).")
+
+DEF_REG_FIELD(USR_FPINVE,
+    "fpinve", 25, 1,
+    "Enable trap on IEEE Invalid.")
+DEF_REG_FIELD(USR_FPDBZE,
+    "fpdbze", 26, 1, "Enable trap on IEEE Divide-By-Zero.")
+DEF_REG_FIELD(USR_FPOVFE,
+    "fpovfe", 27, 1,
+    "Enable trap on IEEE Overflow.")
+DEF_REG_FIELD(USR_FPUNFE,
+    "fpunfe", 28, 1,
+    "Enable trap on IEEE Underflow.")
+DEF_REG_FIELD(USR_FPINPE,
+    "fpinpe", 29, 1,
+    "Enable trap on IEEE Inexact.")
+DEF_REG_FIELD(USR_PFA,
+    "pfa", 31, 1,
+    "L2 Prefetch Active: Set when non-blocking l2fetch instruction is "
+    "prefetching requested data, remains set until l2fetch prefetch operation "
+    "is completed (or not active).") /* read-only */
+
diff --git a/target/hexagon/reg_fields.c b/target/hexagon/reg_fields.c
new file mode 100644
index 0000000..2a3e4f5a
--- /dev/null
+++ b/target/hexagon/reg_fields.c
@@ -0,0 +1,28 @@
+/*
+ *  Copyright(c) 2019-2020 Qualcomm Innovation Center, Inc. All Rights 
Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "reg_fields.h"
+
+reg_field_t reg_field_info[] = {
+#define DEF_REG_FIELD(TAG, NAME, START, WIDTH, DESCRIPTION)    \
+      {NAME, START, WIDTH, DESCRIPTION},
+#include "reg_fields_def.h"
+      {NULL, 0, 0}
+#undef DEF_REG_FIELD
+};
+
-- 
2.7.4


reply via email to

[Prev in Thread] Current Thread [Next in Thread]