[PULL 05/23] hw/sd/milkymist: Do not create SD card within the SD host controller

[Philippe Mathieu-Daudé]

SD/MMC host controllers provide a SD Bus to plug SD cards,
but don't come with SD card plugged in :) Let the machine/board
model create and plug the SD cards when required.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200705211016.15241-5-f4bug@amsat.org>
---
 hw/lm32/milkymist.c       | 13 +++++++++
 hw/sd/milkymist-memcard.c | 55 +++++++++++++++++++++++----------------
 2 files changed, 45 insertions(+), 23 deletions(-)

diff --git a/hw/lm32/milkymist.c b/hw/lm32/milkymist.c
index 469e3c43225..9f8fe9fef15 100644
--- a/hw/lm32/milkymist.c
+++ b/hw/lm32/milkymist.c
@@ -34,6 +34,7 @@
 #include "elf.h"
 #include "milkymist-hw.h"
 #include "hw/display/milkymist_tmu2.h"
+#include "hw/sd/sd.h"
 #include "lm32.h"
 #include "exec/address-spaces.h"
 #include "qemu/cutils.h"
@@ -83,11 +84,23 @@ static void main_cpu_reset(void *opaque)
 static DeviceState *milkymist_memcard_create(hwaddr base)
 {
     DeviceState *dev;
+    DriveInfo *dinfo;
 
     dev = qdev_new("milkymist-memcard");
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
 
+    dinfo = drive_get_next(IF_SD);
+    if (dinfo) {
+        DeviceState *card;
+
+        card = qdev_new(TYPE_SD_CARD);
+        qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo),
+                                &error_fatal);
+        qdev_realize_and_unref(card, qdev_get_child_bus(dev, "sd-bus"),
+                               &error_fatal);
+    }
+
     return dev;
 }
 
diff --git a/hw/sd/milkymist-memcard.c b/hw/sd/milkymist-memcard.c
index 747c5c6136b..e9f5db5e22d 100644
--- a/hw/sd/milkymist-memcard.c
+++ b/hw/sd/milkymist-memcard.c
@@ -66,6 +66,8 @@ enum {
 #define MILKYMIST_MEMCARD(obj) \
     OBJECT_CHECK(MilkymistMemcardState, (obj), TYPE_MILKYMIST_MEMCARD)
 
+#define TYPE_MILKYMIST_SDBUS "milkymist-sdbus"
+
 struct MilkymistMemcardState {
     SysBusDevice parent_obj;
 
@@ -253,6 +255,19 @@ static void milkymist_memcard_reset(DeviceState *d)
     }
 }
 
+static void milkymist_memcard_set_readonly(DeviceState *dev, bool level)
+{
+    qemu_log_mask(LOG_UNIMP,
+                  "milkymist_memcard: read-only mode not supported\n");
+}
+
+static void milkymist_memcard_set_inserted(DeviceState *dev, bool level)
+{
+    MilkymistMemcardState *s = MILKYMIST_MEMCARD(dev);
+
+    s->enabled = !!level;
+}
+
 static void milkymist_memcard_init(Object *obj)
 {
     MilkymistMemcardState *s = MILKYMIST_MEMCARD(obj);
@@ -266,27 +281,6 @@ static void milkymist_memcard_init(Object *obj)
                         DEVICE(obj), "sd-bus");
 }
 
-static void milkymist_memcard_realize(DeviceState *dev, Error **errp)
-{
-    MilkymistMemcardState *s = MILKYMIST_MEMCARD(dev);
-    DeviceState *carddev;
-    BlockBackend *blk;
-    DriveInfo *dinfo;
-    Error *err = NULL;
-
-    /* Create and plug in the sd card */
-    /* FIXME use a qdev drive property instead of drive_get_next() */
-    dinfo = drive_get_next(IF_SD);
-    blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL;
-    carddev = qdev_new(TYPE_SD_CARD);
-    qdev_prop_set_drive(carddev, "drive", blk);
-    if (!qdev_realize_and_unref(carddev, BUS(&s->sdbus), &err)) {
-        error_propagate_prepend(errp, err, "failed to init SD card");
-        return;
-    }
-    s->enabled = blk && blk_is_inserted(blk);
-}
-
 static const VMStateDescription vmstate_milkymist_memcard = {
     .name = "milkymist-memcard",
     .version_id = 1,
@@ -308,10 +302,9 @@ static void milkymist_memcard_class_init(ObjectClass 
*klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
 
-    dc->realize = milkymist_memcard_realize;
     dc->reset = milkymist_memcard_reset;
     dc->vmsd = &vmstate_milkymist_memcard;
-    /* Reason: init() method uses drive_get_next() */
+    /* Reason: output IRQs should be wired up */
     dc->user_creatable = false;
 }
 
@@ -323,9 +316,25 @@ static const TypeInfo milkymist_memcard_info = {
     .class_init    = milkymist_memcard_class_init,
 };
 
+static void milkymist_sdbus_class_init(ObjectClass *klass, void *data)
+{
+    SDBusClass *sbc = SD_BUS_CLASS(klass);
+
+    sbc->set_inserted = milkymist_memcard_set_inserted;
+    sbc->set_readonly = milkymist_memcard_set_readonly;
+}
+
+static const TypeInfo milkymist_sdbus_info = {
+    .name = TYPE_MILKYMIST_SDBUS,
+    .parent = TYPE_SD_BUS,
+    .instance_size = sizeof(SDBus),
+    .class_init = milkymist_sdbus_class_init,
+};
+
 static void milkymist_memcard_register_types(void)
 {
     type_register_static(&milkymist_memcard_info);
+    type_register_static(&milkymist_sdbus_info);
 }
 
 type_init(milkymist_memcard_register_types)
-- 
2.26.2