[PATCH] hw/riscv: boot: Reduce FDT address alignment constraints

[Alistair Francis]

From: Alistair Francis <alistair.francis@wdc.com>

We previously stored the device tree at a 16MB alignment from the end of
memory (or 3GB). This means we need at least 16MB of memory to be able
to do this. We don't actually need the FDT to be 16MB aligned, so let's
drop it down to 2MB so that we can support systems with less memory,
while also allowing FDT size expansion.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/992
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
 hw/riscv/boot.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c
index 57a41df8e9..e476d8f491 100644
--- a/hw/riscv/boot.c
+++ b/hw/riscv/boot.c
@@ -226,11 +226,11 @@ uint64_t riscv_load_fdt(hwaddr dram_base, uint64_t 
mem_size, void *fdt)
     /*
      * We should put fdt as far as possible to avoid kernel/initrd overwriting
      * its content. But it should be addressable by 32 bit system as well.
-     * Thus, put it at an 16MB aligned address that less than fdt size from the
+     * Thus, put it at an 2MB aligned address that less than fdt size from the
      * end of dram or 3GB whichever is lesser.
      */
     temp = (dram_base < 3072 * MiB) ? MIN(dram_end, 3072 * MiB) : dram_end;
-    fdt_addr = QEMU_ALIGN_DOWN(temp - fdtsize, 16 * MiB);
+    fdt_addr = QEMU_ALIGN_DOWN(temp - fdtsize, 2 * MiB);
 
     ret = fdt_pack(fdt);
     /* Should only fail if we've built a corrupted tree */
-- 
2.36.1