[PULL 51/63] hw/riscv/virt-acpi-build.c: Add namespace devices for PLIC and APLIC

[Michael S. Tsirkin]

From: Sunil V L <sunilvl@ventanamicro.com>

As per the requirement ACPI_080 in the RISC-V Boot and Runtime Services
(BRS) specification [1],  PLIC and APLIC should be in namespace as well.
So, add them using the defined HID.

[1] - 
https://github.com/riscv-non-isa/riscv-brs/releases/download/v0.0.2/riscv-brs-spec.pdf
      (Chapter 6)

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-2-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/riscv/virt-acpi-build.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/hw/riscv/virt-acpi-build.c b/hw/riscv/virt-acpi-build.c
index 0925528160..5f5082a35b 100644
--- a/hw/riscv/virt-acpi-build.c
+++ b/hw/riscv/virt-acpi-build.c
@@ -141,6 +141,30 @@ static void acpi_dsdt_add_cpus(Aml *scope, RISCVVirtState 
*s)
     }
 }
 
+static void acpi_dsdt_add_plic_aplic(Aml *scope, uint8_t socket_count,
+                                     uint64_t mmio_base, uint64_t mmio_size,
+                                     const char *hid)
+{
+    uint64_t plic_aplic_addr;
+    uint32_t gsi_base;
+    uint8_t  socket;
+
+    for (socket = 0; socket < socket_count; socket++) {
+        plic_aplic_addr = mmio_base + mmio_size * socket;
+        gsi_base = VIRT_IRQCHIP_NUM_SOURCES * socket;
+        Aml *dev = aml_device("IC%.02X", socket);
+        aml_append(dev, aml_name_decl("_HID", aml_string("%s", hid)));
+        aml_append(dev, aml_name_decl("_UID", aml_int(socket)));
+        aml_append(dev, aml_name_decl("_GSB", aml_int(gsi_base)));
+
+        Aml *crs = aml_resource_template();
+        aml_append(crs, aml_memory32_fixed(plic_aplic_addr, mmio_size,
+                                           AML_READ_WRITE));
+        aml_append(dev, aml_name_decl("_CRS", crs));
+        aml_append(scope, dev);
+    }
+}
+
 static void
 acpi_dsdt_add_uart(Aml *scope, const MemMapEntry *uart_memmap,
                     uint32_t uart_irq)
@@ -411,6 +435,14 @@ static void build_dsdt(GArray *table_data,
 
     socket_count = riscv_socket_count(ms);
 
+    if (s->aia_type == VIRT_AIA_TYPE_NONE) {
+        acpi_dsdt_add_plic_aplic(scope, socket_count, memmap[VIRT_PLIC].base,
+                                 memmap[VIRT_PLIC].size, "RSCV0001");
+    } else {
+        acpi_dsdt_add_plic_aplic(scope, socket_count, 
memmap[VIRT_APLIC_S].base,
+                                 memmap[VIRT_APLIC_S].size, "RSCV0002");
+    }
+
     acpi_dsdt_add_uart(scope, &memmap[VIRT_UART0], UART0_IRQ);
 
     if (socket_count == 1) {
-- 
MST