[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[RFC PATCH v5 7/8] rust: add PL011 device model
|
From: |
Manos Pitsidianakis |
|
Subject: |
[RFC PATCH v5 7/8] rust: add PL011 device model |
|
Date: |
Mon, 22 Jul 2024 14:43:37 +0300 |
This commit adds a re-implementation of hw/char/pl011.c in Rust.
How to build:
1. Configure a QEMU build with:
--enable-system --target-list=aarch64-softmmu --enable-rust
2. Launching a VM with qemu-system-aarch64 should use the Rust version
of the pl011 device
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
---
MAINTAINERS | 5 +
hw/arm/Kconfig | 33 +-
rust/Kconfig | 1 +
rust/hw/Kconfig | 2 +
rust/hw/char/Kconfig | 3 +
rust/hw/char/meson.build | 1 +
rust/hw/char/pl011/.gitignore | 2 +
rust/hw/char/pl011/Cargo.lock | 123 ++++++
rust/hw/char/pl011/Cargo.toml | 26 ++
rust/hw/char/pl011/README.md | 31 ++
rust/hw/char/pl011/meson.build | 24 +
rust/hw/char/pl011/rustfmt.toml | 1 +
rust/hw/char/pl011/src/definitions.rs | 48 ++
rust/hw/char/pl011/src/device.rs | 541 +++++++++++++++++++++++
rust/hw/char/pl011/src/device_class.rs | 58 +++
rust/hw/char/pl011/src/lib.rs | 584 +++++++++++++++++++++++++
rust/hw/char/pl011/src/memory_ops.rs | 45 ++
rust/hw/meson.build | 1 +
rust/meson.build | 2 +
19 files changed, 1520 insertions(+), 11 deletions(-)
create mode 100644 rust/hw/Kconfig
create mode 100644 rust/hw/char/Kconfig
create mode 100644 rust/hw/char/meson.build
create mode 100644 rust/hw/char/pl011/.gitignore
create mode 100644 rust/hw/char/pl011/Cargo.lock
create mode 100644 rust/hw/char/pl011/Cargo.toml
create mode 100644 rust/hw/char/pl011/README.md
create mode 100644 rust/hw/char/pl011/meson.build
create mode 120000 rust/hw/char/pl011/rustfmt.toml
create mode 100644 rust/hw/char/pl011/src/definitions.rs
create mode 100644 rust/hw/char/pl011/src/device.rs
create mode 100644 rust/hw/char/pl011/src/device_class.rs
create mode 100644 rust/hw/char/pl011/src/lib.rs
create mode 100644 rust/hw/char/pl011/src/memory_ops.rs
create mode 100644 rust/hw/meson.build
diff --git a/MAINTAINERS b/MAINTAINERS
index 1789bcfd9b..0af4ef58ed 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1187,6 +1187,11 @@ F: include/hw/*/microbit*.h
F: tests/qtest/microbit-test.c
F: docs/system/arm/nrf.rst
+ARM PL011 Rust device
+M: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
+S: Maintained
+F: rust/hw/char/pl011/
+
AVR Machines
-------------
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 1ad60da7aa..45438c1bc4 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -20,7 +20,8 @@ config ARM_VIRT
select PCI_EXPRESS
select PCI_EXPRESS_GENERIC_BRIDGE
select PFLASH_CFI01
- select PL011 # UART
+ select PL011 if !HAVE_RUST # UART
+ select X_PL011_RUST if HAVE_RUST # UART
select PL031 # RTC
select PL061 # GPIO
select GPIO_PWR
@@ -80,7 +81,8 @@ config HIGHBANK
select AHCI
select ARM_TIMER # sp804
select ARM_V7M
- select PL011 # UART
+ select PL011 if !HAVE_RUST # UART
+ select X_PL011_RUST if HAVE_RUST # UART
select PL022 # SPI
select PL031 # RTC
select PL061 # GPIO
@@ -93,7 +95,8 @@ config INTEGRATOR
depends on TCG && ARM
select ARM_TIMER
select INTEGRATOR_DEBUG
- select PL011 # UART
+ select PL011 if !HAVE_RUST # UART
+ select X_PL011_RUST if HAVE_RUST # UART
select PL031 # RTC
select PL041 # audio
select PL050 # keyboard/mouse
@@ -119,7 +122,8 @@ config MUSCA
default y
depends on TCG && ARM
select ARMSSE
- select PL011
+ select PL011 if !HAVE_RUST # UART
+ select X_PL011_RUST if HAVE_RUST # UART
select PL031
select SPLIT_IRQ
select UNIMP
@@ -228,7 +232,8 @@ config Z2
depends on TCG && ARM
select PFLASH_CFI01
select WM8750
- select PL011 # UART
+ select PL011 if !HAVE_RUST # UART
+ select X_PL011_RUST if HAVE_RUST # UART
select PXA2XX
config REALVIEW
@@ -248,7 +253,8 @@ config REALVIEW
select WM8750 # audio codec
select LSI_SCSI_PCI
select PCI
- select PL011 # UART
+ select PL011 if !HAVE_RUST # UART
+ select X_PL011_RUST if HAVE_RUST # UART
select PL031 # RTC
select PL041 # audio codec
select PL050 # keyboard/mouse
@@ -273,7 +279,8 @@ config SBSA_REF
select PCI_EXPRESS
select PCI_EXPRESS_GENERIC_BRIDGE
select PFLASH_CFI01
- select PL011 # UART
+ select PL011 if !HAVE_RUST # UART
+ select X_PL011_RUST if HAVE_RUST # UART
select PL031 # RTC
select PL061 # GPIO
select USB_XHCI_SYSBUS
@@ -297,7 +304,8 @@ config STELLARIS
select ARM_V7M
select CMSDK_APB_WATCHDOG
select I2C
- select PL011 # UART
+ select PL011 if !HAVE_RUST # UART
+ select X_PL011_RUST if HAVE_RUST # UART
select PL022 # SPI
select PL061 # GPIO
select SSD0303 # OLED display
@@ -356,7 +364,8 @@ config VEXPRESS
select ARM_TIMER # sp804
select LAN9118
select PFLASH_CFI01
- select PL011 # UART
+ select PL011 if !HAVE_RUST # UART
+ select X_PL011_RUST if HAVE_RUST # UART
select PL041 # audio codec
select PL181 # display
select REALVIEW
@@ -440,7 +449,8 @@ config RASPI
default y
depends on TCG && ARM
select FRAMEBUFFER
- select PL011 # UART
+ select PL011 if !HAVE_RUST # UART
+ select X_PL011_RUST if HAVE_RUST # UART
select SDHCI
select USB_DWC2
select BCM2835_SPI
@@ -515,7 +525,8 @@ config XLNX_VERSAL
select ARM_GIC
select CPU_CLUSTER
select DEVICE_TREE
- select PL011
+ select PL011 if !HAVE_RUST # UART
+ select X_PL011_RUST if HAVE_RUST # UART
select CADENCE
select VIRTIO_MMIO
select UNIMP
diff --git a/rust/Kconfig b/rust/Kconfig
index e69de29bb2..f9f5c39098 100644
--- a/rust/Kconfig
+++ b/rust/Kconfig
@@ -0,0 +1 @@
+source hw/Kconfig
diff --git a/rust/hw/Kconfig b/rust/hw/Kconfig
new file mode 100644
index 0000000000..4d934f30af
--- /dev/null
+++ b/rust/hw/Kconfig
@@ -0,0 +1,2 @@
+# devices Kconfig
+source char/Kconfig
diff --git a/rust/hw/char/Kconfig b/rust/hw/char/Kconfig
new file mode 100644
index 0000000000..a1732a9e97
--- /dev/null
+++ b/rust/hw/char/Kconfig
@@ -0,0 +1,3 @@
+config X_PL011_RUST
+ bool
+ default y if HAVE_RUST
diff --git a/rust/hw/char/meson.build b/rust/hw/char/meson.build
new file mode 100644
index 0000000000..5716dc43ef
--- /dev/null
+++ b/rust/hw/char/meson.build
@@ -0,0 +1 @@
+subdir('pl011')
diff --git a/rust/hw/char/pl011/.gitignore b/rust/hw/char/pl011/.gitignore
new file mode 100644
index 0000000000..71eaff2035
--- /dev/null
+++ b/rust/hw/char/pl011/.gitignore
@@ -0,0 +1,2 @@
+# Ignore generated bindings file overrides.
+src/bindings.rs.inc
diff --git a/rust/hw/char/pl011/Cargo.lock b/rust/hw/char/pl011/Cargo.lock
new file mode 100644
index 0000000000..1af92fb16b
--- /dev/null
+++ b/rust/hw/char/pl011/Cargo.lock
@@ -0,0 +1,123 @@
+# This file is automatically @generated by Cargo.
+# It is not intended for manual editing.
+version = 3
+
+[[package]]
+name = "arbitrary-int"
+version = "1.2.7"
+source = "registry+https://github.com/rust-lang/crates.io-index";
+checksum = "c84fc003e338a6f69fbd4f7fe9f92b535ff13e9af8997f3b14b6ddff8b1df46d"
+
+[[package]]
+name = "bilge"
+version = "0.2.0"
+source = "registry+https://github.com/rust-lang/crates.io-index";
+checksum = "dc707ed8ebf81de5cd6c7f48f54b4c8621760926cdf35a57000747c512e67b57"
+dependencies = [
+ "arbitrary-int",
+ "bilge-impl",
+]
+
+[[package]]
+name = "bilge-impl"
+version = "0.2.0"
+source = "registry+https://github.com/rust-lang/crates.io-index";
+checksum = "feb11e002038ad243af39c2068c8a72bcf147acf05025dcdb916fcc000adb2d8"
+dependencies = [
+ "itertools",
+ "proc-macro-error",
+ "proc-macro2",
+ "quote",
+ "syn",
+]
+
+[[package]]
+name = "either"
+version = "1.12.0"
+source = "registry+https://github.com/rust-lang/crates.io-index";
+checksum = "3dca9240753cf90908d7e4aac30f630662b02aebaa1b58a3cadabdb23385b58b"
+
+[[package]]
+name = "itertools"
+version = "0.11.0"
+source = "registry+https://github.com/rust-lang/crates.io-index";
+checksum = "b1c173a5686ce8bfa551b3563d0c2170bf24ca44da99c7ca4bfdab5418c3fe57"
+dependencies = [
+ "either",
+]
+
+[[package]]
+name = "pl011"
+version = "0.1.0"
+dependencies = [
+ "bilge",
+ "qemu_api",
+]
+
+[[package]]
+name = "proc-macro-error"
+version = "1.0.4"
+source = "registry+https://github.com/rust-lang/crates.io-index";
+checksum = "da25490ff9892aab3fcf7c36f08cfb902dd3e71ca0f9f9517bea02a73a5ce38c"
+dependencies = [
+ "proc-macro-error-attr",
+ "proc-macro2",
+ "quote",
+ "version_check",
+]
+
+[[package]]
+name = "proc-macro-error-attr"
+version = "1.0.4"
+source = "registry+https://github.com/rust-lang/crates.io-index";
+checksum = "a1be40180e52ecc98ad80b184934baf3d0d29f979574e439af5a55274b35f869"
+dependencies = [
+ "proc-macro2",
+ "quote",
+ "version_check",
+]
+
+[[package]]
+name = "proc-macro2"
+version = "1.0.84"
+source = "registry+https://github.com/rust-lang/crates.io-index";
+checksum = "ec96c6a92621310b51366f1e28d05ef11489516e93be030060e5fc12024a49d6"
+dependencies = [
+ "unicode-ident",
+]
+
+[[package]]
+name = "qemu_api"
+version = "0.1.0"
+
+[[package]]
+name = "quote"
+version = "1.0.36"
+source = "registry+https://github.com/rust-lang/crates.io-index";
+checksum = "0fa76aaf39101c457836aec0ce2316dbdc3ab723cdda1c6bd4e6ad4208acaca7"
+dependencies = [
+ "proc-macro2",
+]
+
+[[package]]
+name = "syn"
+version = "2.0.66"
+source = "registry+https://github.com/rust-lang/crates.io-index";
+checksum = "c42f3f41a2de00b01c0aaad383c5a45241efc8b2d1eda5661812fda5f3cdcff5"
+dependencies = [
+ "proc-macro2",
+ "quote",
+ "unicode-ident",
+]
+
+[[package]]
+name = "unicode-ident"
+version = "1.0.12"
+source = "registry+https://github.com/rust-lang/crates.io-index";
+checksum = "3354b9ac3fae1ff6755cb6db53683adb661634f67557942dea4facebec0fee4b"
+
+[[package]]
+name = "version_check"
+version = "0.9.4"
+source = "registry+https://github.com/rust-lang/crates.io-index";
+checksum = "49874b5167b65d7193b8aba1567f5c7d93d001cafc34600cee003eda787e483f"
diff --git a/rust/hw/char/pl011/Cargo.toml b/rust/hw/char/pl011/Cargo.toml
new file mode 100644
index 0000000000..67a6973da6
--- /dev/null
+++ b/rust/hw/char/pl011/Cargo.toml
@@ -0,0 +1,26 @@
+[package]
+name = "pl011"
+version = "0.1.0"
+edition = "2021"
+authors = ["Manos Pitsidianakis <manos.pitsidianakis@linaro.org>"]
+license = "GPL-2.0 OR GPL-3.0-or-later"
+readme = "README.md"
+homepage = "https://www.qemu.org";
+description = "pl011 device model for QEMU"
+repository = "https://gitlab.com/epilys/rust-for-qemu";
+resolver = "2"
+publish = false
+keywords = []
+categories = []
+
+[lib]
+crate-type = ["staticlib"]
+
+[dependencies]
+arbitrary-int = { version = "1.2.7" }
+bilge = { version = "0.2.0" }
+bilge-impl = { version = "0.2.0" }
+qemu_api = { path = "../../../qemu-api" }
+
+# Do not include in any global workspace
+[workspace]
diff --git a/rust/hw/char/pl011/README.md b/rust/hw/char/pl011/README.md
new file mode 100644
index 0000000000..cd7dea3163
--- /dev/null
+++ b/rust/hw/char/pl011/README.md
@@ -0,0 +1,31 @@
+# PL011 QEMU Device Model
+
+This library implements a device model for the PrimeCell® UART (PL011)
+device in QEMU.
+
+## Build static lib
+
+Host build target must be explicitly specified:
+
+```sh
+cargo build --target x86_64-unknown-linux-gnu
+```
+
+Replace host target triplet if necessary.
+
+## Generate Rust documentation
+
+To generate docs for this crate, including private items:
+
+```sh
+cargo doc --no-deps --document-private-items --target x86_64-unknown-linux-gnu
+```
+
+To include direct dependencies like `bilge` (bitmaps for register types):
+
+```sh
+cargo tree --depth 1 -e normal --prefix none \
+ | cut -d' ' -f1 \
+ | xargs printf -- '-p %s\n' \
+ | xargs cargo doc --no-deps --document-private-items --target
x86_64-unknown-linux-gnu
+```
diff --git a/rust/hw/char/pl011/meson.build b/rust/hw/char/pl011/meson.build
new file mode 100644
index 0000000000..427788da6e
--- /dev/null
+++ b/rust/hw/char/pl011/meson.build
@@ -0,0 +1,24 @@
+if not config_host_data.get('CONFIG_HAVE_RUST')
+ subdir_done()
+endif
+
+add_languages('rust', required: true)
+subdir('vendor')
+
+_libpl011_rs = static_library(
+ 'pl011',
+ files('src/lib.rs'),
+ rust_abi: 'c',
+ rust_args: rust_args + [
+ '--edition', '2021',
+ ],
+ dependencies: [
+ dep_bilge,
+ dep_bilge_impl,
+ qemu_api,
+ ],
+)
+
+specific_ss.add(when: 'CONFIG_X_PL011_RUST', if_true: [declare_dependency(
+ link_whole: [_libpl011_rs],
+)])
diff --git a/rust/hw/char/pl011/rustfmt.toml b/rust/hw/char/pl011/rustfmt.toml
new file mode 120000
index 0000000000..39f97b043b
--- /dev/null
+++ b/rust/hw/char/pl011/rustfmt.toml
@@ -0,0 +1 @@
+../rustfmt.toml
\ No newline at end of file
diff --git a/rust/hw/char/pl011/src/definitions.rs
b/rust/hw/char/pl011/src/definitions.rs
new file mode 100644
index 0000000000..d7958baa83
--- /dev/null
+++ b/rust/hw/char/pl011/src/definitions.rs
@@ -0,0 +1,48 @@
+// Copyright 2024 Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
+// SPDX-License-Identifier: GPL-2.0 OR GPL-3.0-or-later
+
+//! Definitions required by QEMU when registering the device.
+
+use core::{mem::MaybeUninit, ptr::NonNull};
+
+use qemu_api::bindings::*;
+
+use crate::{device::PL011State, device_class::pl011_class_init};
+
+#[used]
+#[no_mangle]
+pub static TYPE_PL011: &std::ffi::CStr = c"pl011";
+
+qemu_api::type_info! {
+ PL011_ARM_INFO: PL011State,
+ name: c"pl011",
+ parent: TYPE_SYS_BUS_DEVICE,
+ instance_init: Some(pl011_init),
+ abstract_: false,
+ class_init: Some(pl011_class_init),
+}
+
+#[used]
+pub static VMSTATE_PL011: VMStateDescription = VMStateDescription {
+ name: PL011_ARM_INFO.name,
+ unmigratable: true,
+ ..unsafe { MaybeUninit::<VMStateDescription>::zeroed().assume_init() }
+};
+
+/// # Safety
+///
+/// We expect the FFI user of this function to pass a valid pointer, that has
+/// the same size as [`PL011State`]. We also expect the device is
+/// readable/writeable from one thread at any time.
+#[no_mangle]
+pub unsafe extern "C" fn pl011_init(obj: *mut Object) {
+ assert!(!obj.is_null());
+ let mut state = NonNull::new_unchecked(obj.cast::<PL011State>());
+ state.as_mut().init();
+}
+
+qemu_api::module_init! {
+ qom: register_type => {
+ type_register_static(&PL011_ARM_INFO);
+ }
+}
diff --git a/rust/hw/char/pl011/src/device.rs b/rust/hw/char/pl011/src/device.rs
new file mode 100644
index 0000000000..3643b7bdee
--- /dev/null
+++ b/rust/hw/char/pl011/src/device.rs
@@ -0,0 +1,541 @@
+// Copyright 2024 Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
+// SPDX-License-Identifier: GPL-2.0 OR GPL-3.0-or-later
+
+use core::{
+ ffi::{c_int, c_uchar, c_uint, c_void, CStr},
+ ptr::{addr_of, addr_of_mut, NonNull},
+};
+
+use qemu_api::bindings::{self, *};
+
+use crate::{
+ definitions::PL011_ARM_INFO,
+ memory_ops::PL011_OPS,
+ registers::{self, Interrupt},
+ RegisterOffset,
+};
+
+static PL011_ID_ARM: [c_uchar; 8] = [0x11, 0x10, 0x14, 0x00, 0x0d, 0xf0, 0x05,
0xb1];
+
+const DATA_BREAK: u32 = 1 << 10;
+
+/// QEMU sourced constant.
+pub const PL011_FIFO_DEPTH: usize = 16_usize;
+
+#[repr(C)]
+#[derive(Debug)]
+/// PL011 Device Model in QEMU
+pub struct PL011State {
+ pub parent_obj: SysBusDevice,
+ pub iomem: MemoryRegion,
+ pub readbuff: u32,
+ #[doc(alias = "fr")]
+ pub flags: registers::Flags,
+ #[doc(alias = "lcr")]
+ pub line_control: registers::LineControl,
+ #[doc(alias = "rsr")]
+ pub receive_status_error_clear: registers::ReceiveStatusErrorClear,
+ #[doc(alias = "cr")]
+ pub control: registers::Control,
+ pub dmacr: u32,
+ pub int_enabled: u32,
+ pub int_level: u32,
+ pub read_fifo: [u32; PL011_FIFO_DEPTH],
+ pub ilpr: u32,
+ pub ibrd: u32,
+ pub fbrd: u32,
+ pub ifl: u32,
+ pub read_pos: usize,
+ pub read_count: usize,
+ pub read_trigger: usize,
+ #[doc(alias = "chr")]
+ pub char_backend: CharBackend,
+ /// QEMU interrupts
+ ///
+ /// ```text
+ /// * sysbus MMIO region 0: device registers
+ /// * sysbus IRQ 0: `UARTINTR` (combined interrupt line)
+ /// * sysbus IRQ 1: `UARTRXINTR` (receive FIFO interrupt line)
+ /// * sysbus IRQ 2: `UARTTXINTR` (transmit FIFO interrupt line)
+ /// * sysbus IRQ 3: `UARTRTINTR` (receive timeout interrupt line)
+ /// * sysbus IRQ 4: `UARTMSINTR` (momem status interrupt line)
+ /// * sysbus IRQ 5: `UARTEINTR` (error interrupt line)
+ /// ```
+ #[doc(alias = "irq")]
+ pub interrupts: [qemu_irq; 6usize],
+ #[doc(alias = "clk")]
+ pub clock: NonNull<Clock>,
+ #[doc(alias = "migrate_clk")]
+ pub migrate_clock: bool,
+}
+
+#[used]
+pub static CLK_NAME: &CStr = c"clk";
+
+impl PL011State {
+ pub fn init(&mut self) {
+ // SAFETY:
+ //
+ // self and self.iomem are guaranteed to be valid at this point since
callers
+ // must make sure the `self` reference is valid.
+ unsafe {
+ memory_region_init_io(
+ addr_of_mut!(self.iomem),
+ addr_of_mut!(*self).cast::<Object>(),
+ &PL011_OPS,
+ addr_of_mut!(*self).cast::<c_void>(),
+ PL011_ARM_INFO.name,
+ 0x1000,
+ );
+ let sbd = addr_of_mut!(*self).cast::<SysBusDevice>();
+ let dev = addr_of_mut!(*self).cast::<DeviceState>();
+ sysbus_init_mmio(sbd, addr_of_mut!(self.iomem));
+ for irq in self.interrupts.iter_mut() {
+ sysbus_init_irq(sbd, irq);
+ }
+ self.clock = NonNull::new(qdev_init_clock_in(
+ dev,
+ CLK_NAME.as_ptr(),
+ None, /* pl011_clock_update */
+ addr_of_mut!(*self).cast::<c_void>(),
+ ClockEvent_ClockUpdate,
+ ))
+ .unwrap();
+ }
+ }
+
+ pub fn read(&mut self, offset: hwaddr, _size: core::ffi::c_uint) -> u64 {
+ use RegisterOffset::*;
+
+ match RegisterOffset::try_from(offset) {
+ Err(v) if (0x3f8..0x400).contains(&v) => {
+ u64::from(PL011_ID_ARM[((offset - 0xfe0) >> 2) as usize])
+ }
+ Err(_) => {
+ // qemu_log_mask(LOG_GUEST_ERROR, "pl011_read: Bad offset
0x%x\n", (int)offset);
+ 0
+ }
+ Ok(DR) => {
+ // s->flags &= ~PL011_FLAG_RXFF;
+ self.flags.set_receive_fifo_full(false);
+ let c = self.read_fifo[self.read_pos];
+ if self.read_count > 0 {
+ self.read_count -= 1;
+ self.read_pos = (self.read_pos + 1) & (self.fifo_depth() -
1);
+ }
+ if self.read_count == 0 {
+ // self.flags |= PL011_FLAG_RXFE;
+ self.flags.set_receive_fifo_empty(true);
+ }
+ if self.read_count + 1 == self.read_trigger {
+ //self.int_level &= ~ INT_RX;
+ self.int_level &= !registers::INT_RX;
+ }
+ // Update error bits.
+ self.receive_status_error_clear = c.to_be_bytes()[3].into();
+ self.update();
+ // SAFETY: self.char_backend is a valid CharBackend instance
after it's been
+ // initialized in realize().
+ unsafe { qemu_chr_fe_accept_input(&mut self.char_backend) };
+ c.into()
+ }
+ Ok(RSR) => u8::from(self.receive_status_error_clear).into(),
+ Ok(FR) => u16::from(self.flags).into(),
+ Ok(FBRD) => self.fbrd.into(),
+ Ok(ILPR) => self.ilpr.into(),
+ Ok(IBRD) => self.ibrd.into(),
+ Ok(LCR_H) => u16::from(self.line_control).into(),
+ Ok(CR) => {
+ // We exercise our self-control.
+ u16::from(self.control).into()
+ }
+ Ok(FLS) => self.ifl.into(),
+ Ok(IMSC) => self.int_enabled.into(),
+ Ok(RIS) => self.int_level.into(),
+ Ok(MIS) => u64::from(self.int_level & self.int_enabled),
+ Ok(ICR) => {
+ // "The UARTICR Register is the interrupt clear register and
is write-only"
+ // Source: ARM DDI 0183G 3.3.13 Interrupt Clear Register,
UARTICR
+ 0
+ }
+ Ok(DMACR) => self.dmacr.into(),
+ }
+ }
+
+ pub fn write(&mut self, offset: hwaddr, value: u64) {
+ // eprintln!("write offset {offset} value {value}");
+ use RegisterOffset::*;
+ let value: u32 = value as u32;
+ match RegisterOffset::try_from(offset) {
+ Err(_bad_offset) => {
+ eprintln!("write bad offset {offset} value {value}");
+ }
+ Ok(DR) => {
+ // ??? Check if transmitter is enabled.
+ let ch: u8 = value as u8;
+ // XXX this blocks entire thread. Rewrite to use
+ // qemu_chr_fe_write and background I/O callbacks
+
+ // SAFETY: self.char_backend is a valid CharBackend instance
after it's been
+ // initialized in realize().
+ unsafe {
+ qemu_chr_fe_write_all(addr_of_mut!(self.char_backend),
&ch, 1);
+ }
+ self.loopback_tx(value);
+ self.int_level |= registers::INT_TX;
+ self.update();
+ }
+ Ok(RSR) => {
+ self.receive_status_error_clear = 0.into();
+ }
+ Ok(FR) => {
+ // flag writes are ignored
+ }
+ Ok(ILPR) => {
+ self.ilpr = value;
+ }
+ Ok(IBRD) => {
+ self.ibrd = value;
+ }
+ Ok(FBRD) => {
+ self.fbrd = value;
+ }
+ Ok(LCR_H) => {
+ let value = value as u16;
+ let new_val: registers::LineControl = value.into();
+ // Reset the FIFO state on FIFO enable or disable
+ if bool::from(self.line_control.fifos_enabled())
+ ^ bool::from(new_val.fifos_enabled())
+ {
+ self.reset_fifo();
+ }
+ if self.line_control.send_break() ^ new_val.send_break() {
+ let mut break_enable: c_int = new_val.send_break().into();
+ // SAFETY: self.char_backend is a valid CharBackend
instance after it's been
+ // initialized in realize().
+ unsafe {
+ qemu_chr_fe_ioctl(
+ addr_of_mut!(self.char_backend),
+ CHR_IOCTL_SERIAL_SET_BREAK as i32,
+ addr_of_mut!(break_enable).cast::<c_void>(),
+ );
+ }
+ self.loopback_break(break_enable > 0);
+ }
+ self.line_control = new_val;
+ self.set_read_trigger();
+ }
+ Ok(CR) => {
+ // ??? Need to implement the enable bit.
+ let value = value as u16;
+ self.control = value.into();
+ self.loopback_mdmctrl();
+ }
+ Ok(FLS) => {
+ self.ifl = value;
+ self.set_read_trigger();
+ }
+ Ok(IMSC) => {
+ self.int_enabled = value;
+ self.update();
+ }
+ Ok(RIS) => {}
+ Ok(MIS) => {}
+ Ok(ICR) => {
+ self.int_level &= !value;
+ self.update();
+ }
+ Ok(DMACR) => {
+ self.dmacr = value;
+ if value & 3 > 0 {
+ // qemu_log_mask(LOG_UNIMP, "pl011: DMA not
implemented\n");
+ eprintln!("pl011: DMA not implemented");
+ }
+ }
+ }
+ }
+
+ #[inline]
+ fn loopback_tx(&mut self, value: u32) {
+ if !self.loopback_enabled() {
+ return;
+ }
+
+ // Caveat:
+ //
+ // In real hardware, TX loopback happens at the serial-bit level
+ // and then reassembled by the RX logics back into bytes and placed
+ // into the RX fifo. That is, loopback happens after TX fifo.
+ //
+ // Because the real hardware TX fifo is time-drained at the frame
+ // rate governed by the configured serial format, some loopback
+ // bytes in TX fifo may still be able to get into the RX fifo
+ // that could be full at times while being drained at software
+ // pace.
+ //
+ // In such scenario, the RX draining pace is the major factor
+ // deciding which loopback bytes get into the RX fifo, unless
+ // hardware flow-control is enabled.
+ //
+ // For simplicity, the above described is not emulated.
+ self.put_fifo(value);
+ }
+
+ fn loopback_mdmctrl(&mut self) {
+ if !self.loopback_enabled() {
+ return;
+ }
+
+ /*
+ * Loopback software-driven modem control outputs to modem status
inputs:
+ * FR.RI <= CR.Out2
+ * FR.DCD <= CR.Out1
+ * FR.CTS <= CR.RTS
+ * FR.DSR <= CR.DTR
+ *
+ * The loopback happens immediately even if this call is triggered
+ * by setting only CR.LBE.
+ *
+ * CTS/RTS updates due to enabled hardware flow controls are not
+ * dealt with here.
+ */
+
+ //fr = s->flags & ~(PL011_FLAG_RI | PL011_FLAG_DCD |
+ // PL011_FLAG_DSR | PL011_FLAG_CTS);
+ //fr |= (cr & CR_OUT2) ? PL011_FLAG_RI : 0;
+ //fr |= (cr & CR_OUT1) ? PL011_FLAG_DCD : 0;
+ //fr |= (cr & CR_RTS) ? PL011_FLAG_CTS : 0;
+ //fr |= (cr & CR_DTR) ? PL011_FLAG_DSR : 0;
+ //
+ self.flags.set_ring_indicator(self.control.out_2());
+ self.flags.set_data_carrier_detect(self.control.out_1());
+ self.flags.set_clear_to_send(self.control.request_to_send());
+ self.flags
+ .set_data_set_ready(self.control.data_transmit_ready());
+
+ // Change interrupts based on updated FR
+ let mut il = self.int_level;
+
+ il &= !Interrupt::MS;
+ //il |= (fr & PL011_FLAG_DSR) ? INT_DSR : 0;
+ //il |= (fr & PL011_FLAG_DCD) ? INT_DCD : 0;
+ //il |= (fr & PL011_FLAG_CTS) ? INT_CTS : 0;
+ //il |= (fr & PL011_FLAG_RI) ? INT_RI : 0;
+
+ if self.flags.data_set_ready() {
+ il |= Interrupt::DSR as u32;
+ }
+ if self.flags.data_carrier_detect() {
+ il |= Interrupt::DCD as u32;
+ }
+ if self.flags.clear_to_send() {
+ il |= Interrupt::CTS as u32;
+ }
+ if self.flags.ring_indicator() {
+ il |= Interrupt::RI as u32;
+ }
+ self.int_level = il;
+ self.update();
+ }
+
+ fn loopback_break(&mut self, enable: bool) {
+ if enable {
+ self.loopback_tx(DATA_BREAK);
+ }
+ }
+
+ fn set_read_trigger(&mut self) {
+ //#if 0
+ // /* The docs say the RX interrupt is triggered when the FIFO
exceeds
+ // the threshold. However linux only reads the FIFO in response
to an
+ // interrupt. Triggering the interrupt when the FIFO is
non-empty seems
+ // to make things work. */
+ // if (s->lcr & LCR_FEN)
+ // s->read_trigger = (s->ifl >> 1) & 0x1c;
+ // else
+ //#endif
+ self.read_trigger = 1;
+ }
+
+ pub fn realize(&mut self) {
+ // SAFETY: self.char_backend has the correct size and alignment for a
+ // CharBackend object, and its callbacks are of the correct types.
+ unsafe {
+ qemu_chr_fe_set_handlers(
+ addr_of_mut!(self.char_backend),
+ Some(pl011_can_receive),
+ Some(pl011_receive),
+ Some(pl011_event),
+ None,
+ addr_of_mut!(*self).cast::<c_void>(),
+ core::ptr::null_mut(),
+ true,
+ );
+ }
+ }
+
+ pub fn reset(&mut self) {
+ self.line_control.reset();
+ self.receive_status_error_clear.reset();
+ self.dmacr = 0;
+ self.int_enabled = 0;
+ self.int_level = 0;
+ self.ilpr = 0;
+ self.ibrd = 0;
+ self.fbrd = 0;
+ self.read_trigger = 1;
+ self.ifl = 0x12;
+ self.control.reset();
+ self.flags = 0.into();
+ self.reset_fifo();
+ }
+
+ pub fn reset_fifo(&mut self) {
+ self.read_count = 0;
+ self.read_pos = 0;
+
+ /* Reset FIFO flags */
+ self.flags.reset();
+ }
+
+ pub fn can_receive(&self) -> bool {
+ // trace_pl011_can_receive(s->lcr, s->read_count, r);
+ self.read_count < self.fifo_depth()
+ }
+
+ pub fn event(&mut self, event: QEMUChrEvent) {
+ if event == bindings::QEMUChrEvent_CHR_EVENT_BREAK &&
!self.fifo_enabled() {
+ self.put_fifo(DATA_BREAK);
+ self.receive_status_error_clear.set_break_error(true);
+ }
+ }
+
+ #[inline]
+ pub fn fifo_enabled(&self) -> bool {
+ matches!(self.line_control.fifos_enabled(), registers::Mode::FIFO)
+ }
+
+ #[inline]
+ pub fn loopback_enabled(&self) -> bool {
+ self.control.enable_loopback()
+ }
+
+ #[inline]
+ pub fn fifo_depth(&self) -> usize {
+ // Note: FIFO depth is expected to be power-of-2
+ if self.fifo_enabled() {
+ return PL011_FIFO_DEPTH;
+ }
+ 1
+ }
+
+ pub fn put_fifo(&mut self, value: c_uint) {
+ let depth = self.fifo_depth();
+ assert!(depth > 0);
+ let slot = (self.read_pos + self.read_count) & (depth - 1);
+ self.read_fifo[slot] = value;
+ self.read_count += 1;
+ // s->flags &= ~PL011_FLAG_RXFE;
+ self.flags.set_receive_fifo_empty(false);
+ if self.read_count == depth {
+ //s->flags |= PL011_FLAG_RXFF;
+ self.flags.set_receive_fifo_full(true);
+ }
+
+ if self.read_count == self.read_trigger {
+ self.int_level |= registers::INT_RX;
+ self.update();
+ }
+ }
+
+ pub fn update(&mut self) {
+ let flags = self.int_level & self.int_enabled;
+ for (irq, i) in self.interrupts.iter().zip(IRQMASK) {
+ // SAFETY: self.interrupts have been initialized in init().
+ unsafe { qemu_set_irq(*irq, i32::from(flags & i != 0)) };
+ }
+ }
+}
+
+/// Which bits in the interrupt status matter for each outbound IRQ line ?
+pub const IRQMASK: [u32; 6] = [
+ /* combined IRQ */
+ Interrupt::E
+ | Interrupt::MS
+ | Interrupt::RT as u32
+ | Interrupt::TX as u32
+ | Interrupt::RX as u32,
+ Interrupt::RX as u32,
+ Interrupt::TX as u32,
+ Interrupt::RT as u32,
+ Interrupt::MS,
+ Interrupt::E,
+];
+
+/// # Safety
+///
+/// We expect the FFI user of this function to pass a valid pointer, that has
+/// the same size as [`PL011State`]. We also expect the device is
+/// readable/writeable from one thread at any time.
+#[no_mangle]
+pub unsafe extern "C" fn pl011_can_receive(opaque: *mut c_void) -> c_int {
+ assert!(!opaque.is_null());
+ let state = NonNull::new_unchecked(opaque.cast::<PL011State>());
+ state.as_ref().can_receive().into()
+}
+
+/// # Safety
+///
+/// We expect the FFI user of this function to pass a valid pointer, that has
+/// the same size as [`PL011State`]. We also expect the device is
+/// readable/writeable from one thread at any time.
+///
+/// The buffer and size arguments must also be valid.
+#[no_mangle]
+pub unsafe extern "C" fn pl011_receive(
+ opaque: *mut core::ffi::c_void,
+ buf: *const u8,
+ size: core::ffi::c_int,
+) {
+ assert!(!opaque.is_null());
+ let mut state = NonNull::new_unchecked(opaque.cast::<PL011State>());
+ if state.as_ref().loopback_enabled() {
+ return;
+ }
+ if size > 0 {
+ assert!(!buf.is_null());
+ state.as_mut().put_fifo(*buf.cast::<c_uint>())
+ }
+}
+
+/// # Safety
+///
+/// We expect the FFI user of this function to pass a valid pointer, that has
+/// the same size as [`PL011State`]. We also expect the device is
+/// readable/writeable from one thread at any time.
+#[no_mangle]
+pub unsafe extern "C" fn pl011_event(opaque: *mut core::ffi::c_void, event:
QEMUChrEvent) {
+ assert!(!opaque.is_null());
+ let mut state = NonNull::new_unchecked(opaque.cast::<PL011State>());
+ state.as_mut().event(event)
+}
+
+/// # Safety
+///
+/// We expect the FFI user of this function to pass a valid pointer for `chr`.
+#[no_mangle]
+pub unsafe extern "C" fn pl011_create(
+ addr: u64,
+ irq: qemu_irq,
+ chr: *mut Chardev,
+) -> *mut DeviceState {
+ let dev: *mut DeviceState = unsafe { qdev_new(PL011_ARM_INFO.name) };
+ assert!(!dev.is_null());
+ let sysbus: *mut SysBusDevice = dev as *mut SysBusDevice;
+
+ qdev_prop_set_chr(dev, bindings::TYPE_CHARDEV.as_ptr(), chr);
+ sysbus_realize_and_unref(sysbus, addr_of!(error_fatal) as *mut *mut Error);
+ sysbus_mmio_map(sysbus, 0, addr);
+ sysbus_connect_irq(sysbus, 0, irq);
+ dev
+}
diff --git a/rust/hw/char/pl011/src/device_class.rs
b/rust/hw/char/pl011/src/device_class.rs
new file mode 100644
index 0000000000..6b99239133
--- /dev/null
+++ b/rust/hw/char/pl011/src/device_class.rs
@@ -0,0 +1,58 @@
+// Copyright 2024 Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
+// SPDX-License-Identifier: GPL-2.0 OR GPL-3.0-or-later
+
+use core::ptr::NonNull;
+
+use qemu_api::bindings::*;
+
+use crate::{definitions::VMSTATE_PL011, device::PL011State};
+
+qemu_api::declare_properties! {
+ PL011_PROPERTIES,
+ qemu_api::define_property!(
+ c"chardev",
+ PL011State,
+ char_backend,
+ unsafe { &qdev_prop_chr },
+ CharBackend
+ ),
+ qemu_api::define_property!(
+ c"migrate-clk",
+ PL011State,
+ migrate_clock,
+ unsafe { &qdev_prop_bool },
+ bool
+ ),
+}
+
+qemu_api::device_class_init! {
+ pl011_class_init,
+ props => PL011_PROPERTIES,
+ realize_fn => Some(pl011_realize),
+ reset_fn => Some(pl011_reset),
+ vmsd => VMSTATE_PL011,
+}
+
+/// # Safety
+///
+/// We expect the FFI user of this function to pass a valid pointer, that has
+/// the same size as [`PL011State`]. We also expect the device is
+/// readable/writeable from one thread at any time.
+#[no_mangle]
+pub unsafe extern "C" fn pl011_realize(dev: *mut DeviceState, _errp: *mut *mut
Error) {
+ assert!(!dev.is_null());
+ let mut state = NonNull::new_unchecked(dev.cast::<PL011State>());
+ state.as_mut().realize();
+}
+
+/// # Safety
+///
+/// We expect the FFI user of this function to pass a valid pointer, that has
+/// the same size as [`PL011State`]. We also expect the device is
+/// readable/writeable from one thread at any time.
+#[no_mangle]
+pub unsafe extern "C" fn pl011_reset(dev: *mut DeviceState) {
+ assert!(!dev.is_null());
+ let mut state = NonNull::new_unchecked(dev.cast::<PL011State>());
+ state.as_mut().reset();
+}
diff --git a/rust/hw/char/pl011/src/lib.rs b/rust/hw/char/pl011/src/lib.rs
new file mode 100644
index 0000000000..697d2ef5a6
--- /dev/null
+++ b/rust/hw/char/pl011/src/lib.rs
@@ -0,0 +1,584 @@
+// Copyright 2024 Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
+// SPDX-License-Identifier: GPL-2.0 OR GPL-3.0-or-later
+//
+// PL011 QEMU Device Model
+//
+// This library implements a device model for the PrimeCell® UART (PL011)
+// device in QEMU.
+//
+#![doc = include_str!("../README.md")]
+//! # Library crate
+//!
+//! See [`PL011State`](crate::device::PL011State) for the device model type and
+//! the [`registers`] module for register types.
+
+#![deny(
+ rustdoc::broken_intra_doc_links,
+ rustdoc::redundant_explicit_links,
+ clippy::correctness,
+ clippy::suspicious,
+ clippy::complexity,
+ clippy::perf,
+ clippy::cargo,
+ clippy::nursery,
+ clippy::style,
+ // restriction group
+ clippy::dbg_macro,
+ clippy::as_underscore,
+ clippy::assertions_on_result_states,
+ // pedantic group
+ clippy::doc_markdown,
+ clippy::borrow_as_ptr,
+ clippy::cast_lossless,
+ clippy::option_if_let_else,
+ clippy::missing_const_for_fn,
+ clippy::cognitive_complexity,
+ clippy::missing_safety_doc,
+ )]
+
+extern crate bilge;
+extern crate bilge_impl;
+extern crate qemu_api;
+
+pub mod definitions;
+pub mod device;
+pub mod device_class;
+pub mod memory_ops;
+
+/// Offset of each register from the base memory address of the device.
+///
+/// # Source
+/// ARM DDI 0183G, Table 3-1 p.3-3
+#[doc(alias = "offset")]
+#[allow(non_camel_case_types)]
+#[repr(u64)]
+#[derive(Debug)]
+pub enum RegisterOffset {
+ /// Data Register
+ ///
+ /// A write to this register initiates the actual data transmission
+ #[doc(alias = "UARTDR")]
+ DR = 0x000,
+ /// Receive Status Register or Error Clear Register
+ #[doc(alias = "UARTRSR")]
+ #[doc(alias = "UARTECR")]
+ RSR = 0x004,
+ /// Flag Register
+ ///
+ /// A read of this register shows if transmission is complete
+ #[doc(alias = "UARTFR")]
+ FR = 0x018,
+ /// Fractional Baud Rate Register
+ ///
+ /// responsible for baud rate speed
+ #[doc(alias = "UARTFBRD")]
+ FBRD = 0x028,
+ /// `IrDA` Low-Power Counter Register
+ #[doc(alias = "UARTILPR")]
+ ILPR = 0x020,
+ /// Integer Baud Rate Register
+ ///
+ /// Responsible for baud rate speed
+ #[doc(alias = "UARTIBRD")]
+ IBRD = 0x024,
+ /// line control register (data frame format)
+ #[doc(alias = "UARTLCR_H")]
+ LCR_H = 0x02C,
+ /// Toggle UART, transmission or reception
+ #[doc(alias = "UARTCR")]
+ CR = 0x030,
+ /// Interrupt FIFO Level Select Register
+ #[doc(alias = "UARTIFLS")]
+ FLS = 0x034,
+ /// Interrupt Mask Set/Clear Register
+ #[doc(alias = "UARTIMSC")]
+ IMSC = 0x038,
+ /// Raw Interrupt Status Register
+ #[doc(alias = "UARTRIS")]
+ RIS = 0x03C,
+ /// Masked Interrupt Status Register
+ #[doc(alias = "UARTMIS")]
+ MIS = 0x040,
+ /// Interrupt Clear Register
+ #[doc(alias = "UARTICR")]
+ ICR = 0x044,
+ /// DMA control Register
+ #[doc(alias = "UARTDMACR")]
+ DMACR = 0x048,
+ ///// Reserved, offsets `0x04C` to `0x07C`.
+ //Reserved = 0x04C,
+}
+
+impl core::convert::TryFrom<u64> for RegisterOffset {
+ type Error = u64;
+
+ fn try_from(value: u64) -> Result<Self, Self::Error> {
+ macro_rules! case {
+ ($($discriminant:ident),*$(,)*) => {
+ /* check that matching on all macro arguments compiles, which
means we are not
+ * missing any enum value; if the type definition ever changes
this will stop
+ * compiling.
+ */
+ const fn _assert_exhaustive(val: RegisterOffset) {
+ match val {
+ $(RegisterOffset::$discriminant => (),)*
+ }
+ }
+
+ match value {
+ $(x if x == Self::$discriminant as u64 =>
Ok(Self::$discriminant),)*
+ _ => Err(value),
+ }
+ }
+ }
+ case! { DR, RSR, FR, FBRD, ILPR, IBRD, LCR_H, CR, FLS, IMSC, RIS, MIS,
ICR, DMACR }
+ }
+}
+
+pub mod registers {
+ //! Device registers exposed as typed structs which are backed by arbitrary
+ //! integer bitmaps. [`Data`], [`Control`], [`LineControl`], etc.
+ //!
+ //! All PL011 registers are essentially 32-bit wide, but are typed here as
+ //! bitmaps with only the necessary width. That is, if a struct bitmap
+ //! in this module is for example 16 bits long, it should be conceived
+ //! as a 32-bit register where the unmentioned higher bits are always
+ //! unused thus treated as zero when read or written.
+ use bilge::prelude::*;
+
+ // TODO: FIFO Mode has different semantics
+ /// Data Register, `UARTDR`
+ ///
+ /// The `UARTDR` register is the data register.
+ ///
+ /// For words to be transmitted:
+ ///
+ /// - if the FIFOs are enabled, data written to this location is pushed
onto
+ /// the transmit
+ /// FIFO
+ /// - if the FIFOs are not enabled, data is stored in the transmitter
+ /// holding register (the
+ /// bottom word of the transmit FIFO).
+ ///
+ /// The write operation initiates transmission from the UART. The data is
+ /// prefixed with a start bit, appended with the appropriate parity bit
+ /// (if parity is enabled), and a stop bit. The resultant word is then
+ /// transmitted.
+ ///
+ /// For received words:
+ ///
+ /// - if the FIFOs are enabled, the data byte and the 4-bit status (break,
+ /// frame, parity,
+ /// and overrun) is pushed onto the 12-bit wide receive FIFO
+ /// - if the FIFOs are not enabled, the data byte and status are stored in
+ /// the receiving
+ /// holding register (the bottom word of the receive FIFO).
+ ///
+ /// The received data byte is read by performing reads from the `UARTDR`
+ /// register along with the corresponding status information. The status
+ /// information can also be read by a read of the `UARTRSR/UARTECR`
+ /// register.
+ ///
+ /// # Note
+ ///
+ /// You must disable the UART before any of the control registers are
+ /// reprogrammed. When the UART is disabled in the middle of
+ /// transmission or reception, it completes the current character before
+ /// stopping.
+ ///
+ /// # Source
+ /// ARM DDI 0183G 3.3.1 Data Register, UARTDR
+ #[bitsize(16)]
+ #[derive(Clone, Copy, DebugBits, FromBits)]
+ #[doc(alias = "UARTDR")]
+ pub struct Data {
+ _reserved: u4,
+ pub data: u8,
+ pub framing_error: bool,
+ pub parity_error: bool,
+ pub break_error: bool,
+ pub overrun_error: bool,
+ }
+
+ // TODO: FIFO Mode has different semantics
+ /// Receive Status Register / Error Clear Register, `UARTRSR/UARTECR`
+ ///
+ /// The UARTRSR/UARTECR register is the receive status register/error clear
+ /// register. Receive status can also be read from the `UARTRSR`
+ /// register. If the status is read from this register, then the status
+ /// information for break, framing and parity corresponds to the
+ /// data character read from the [Data register](Data), `UARTDR` prior to
+ /// reading the UARTRSR register. The status information for overrun is
+ /// set immediately when an overrun condition occurs.
+ ///
+ ///
+ /// # Note
+ /// The received data character must be read first from the [Data
+ /// Register](Data), `UARTDR` before reading the error status associated
+ /// with that data character from the `UARTRSR` register. This read
+ /// sequence cannot be reversed, because the `UARTRSR` register is
+ /// updated only when a read occurs from the `UARTDR` register. However,
+ /// the status information can also be obtained by reading the `UARTDR`
+ /// register
+ ///
+ /// # Source
+ /// ARM DDI 0183G 3.3.2 Receive Status Register/Error Clear Register,
+ /// UARTRSR/UARTECR
+ #[bitsize(8)]
+ #[derive(Clone, Copy, DebugBits, FromBits)]
+ pub struct ReceiveStatusErrorClear {
+ pub framing_error: bool,
+ pub parity_error: bool,
+ pub break_error: bool,
+ pub overrun_error: bool,
+ _reserved_unpredictable: u4,
+ }
+
+ impl ReceiveStatusErrorClear {
+ pub fn reset(&mut self) {
+ // All the bits are cleared to 0 on reset.
+ *self = 0.into();
+ }
+ }
+
+ impl Default for ReceiveStatusErrorClear {
+ fn default() -> Self {
+ 0.into()
+ }
+ }
+
+ #[bitsize(16)]
+ #[derive(Clone, Copy, DebugBits, FromBits)]
+ /// Flag Register, `UARTFR`
+ #[doc(alias = "UARTFR")]
+ pub struct Flags {
+ /// CTS Clear to send. This bit is the complement of the UART clear to
+ /// send, `nUARTCTS`, modem status input. That is, the bit is 1
+ /// when `nUARTCTS` is LOW.
+ pub clear_to_send: bool,
+ /// DSR Data set ready. This bit is the complement of the UART data set
+ /// ready, `nUARTDSR`, modem status input. That is, the bit is 1 when
+ /// `nUARTDSR` is LOW.
+ pub data_set_ready: bool,
+ /// DCD Data carrier detect. This bit is the complement of the UART
data
+ /// carrier detect, `nUARTDCD`, modem status input. That is, the bit is
+ /// 1 when `nUARTDCD` is LOW.
+ pub data_carrier_detect: bool,
+ /// BUSY UART busy. If this bit is set to 1, the UART is busy
+ /// transmitting data. This bit remains set until the complete
+ /// byte, including all the stop bits, has been sent from the
+ /// shift register. This bit is set as soon as the transmit FIFO
+ /// becomes non-empty, regardless of whether the UART is enabled
+ /// or not.
+ pub busy: bool,
+ /// RXFE Receive FIFO empty. The meaning of this bit depends on the
+ /// state of the FEN bit in the UARTLCR_H register. If the FIFO
+ /// is disabled, this bit is set when the receive holding
+ /// register is empty. If the FIFO is enabled, the RXFE bit is
+ /// set when the receive FIFO is empty.
+ pub receive_fifo_empty: bool,
+ /// TXFF Transmit FIFO full. The meaning of this bit depends on the
+ /// state of the FEN bit in the UARTLCR_H register. If the FIFO
+ /// is disabled, this bit is set when the transmit holding
+ /// register is full. If the FIFO is enabled, the TXFF bit is
+ /// set when the transmit FIFO is full.
+ pub transmit_fifo_full: bool,
+ /// RXFF Receive FIFO full. The meaning of this bit depends on the
state
+ /// of the FEN bit in the UARTLCR_H register. If the FIFO is
+ /// disabled, this bit is set when the receive holding register
+ /// is full. If the FIFO is enabled, the RXFF bit is set when
+ /// the receive FIFO is full.
+ pub receive_fifo_full: bool,
+ /// Transmit FIFO empty. The meaning of this bit depends on the state
of
+ /// the FEN bit in the [Line Control register](LineControl),
+ /// `UARTLCR_H`. If the FIFO is disabled, this bit is set when the
+ /// transmit holding register is empty. If the FIFO is enabled,
+ /// the TXFE bit is set when the transmit FIFO is empty. This
+ /// bit does not indicate if there is data in the transmit shift
+ /// register.
+ pub transmit_fifo_empty: bool,
+ /// `RI`, is `true` when `nUARTRI` is `LOW`.
+ pub ring_indicator: bool,
+ _reserved_zero_no_modify: u7,
+ }
+
+ impl Flags {
+ pub fn reset(&mut self) {
+ // After reset TXFF, RXFF, and BUSY are 0, and TXFE and RXFE are 1
+ self.set_receive_fifo_full(false);
+ self.set_transmit_fifo_full(false);
+ self.set_busy(false);
+ self.set_receive_fifo_empty(true);
+ self.set_transmit_fifo_empty(true);
+ }
+ }
+
+ impl Default for Flags {
+ fn default() -> Self {
+ let mut ret: Self = 0.into();
+ ret.reset();
+ ret
+ }
+ }
+
+ #[bitsize(16)]
+ #[derive(Clone, Copy, DebugBits, FromBits)]
+ /// Line Control Register, `UARTLCR_H`
+ #[doc(alias = "UARTLCR_H")]
+ pub struct LineControl {
+ /// 15:8 - Reserved, do not modify, read as zero.
+ _reserved_zero_no_modify: u8,
+ /// 7 SPS Stick parity select.
+ /// 0 = stick parity is disabled
+ /// 1 = either:
+ /// • if the EPS bit is 0 then the parity bit is transmitted and
checked
+ /// as a 1 • if the EPS bit is 1 then the parity bit is
+ /// transmitted and checked as a 0. This bit has no effect when
+ /// the PEN bit disables parity checking and generation. See Table 3-11
+ /// on page 3-14 for the parity truth table.
+ pub sticky_parity: bool,
+ /// WLEN Word length. These bits indicate the number of data bits
+ /// transmitted or received in a frame as follows: b11 = 8 bits
+ /// b10 = 7 bits
+ /// b01 = 6 bits
+ /// b00 = 5 bits.
+ pub word_length: WordLength,
+ /// FEN Enable FIFOs:
+ /// 0 = FIFOs are disabled (character mode) that is, the FIFOs become
+ /// 1-byte-deep holding registers 1 = transmit and receive FIFO
+ /// buffers are enabled (FIFO mode).
+ pub fifos_enabled: Mode,
+ /// 3 STP2 Two stop bits select. If this bit is set to 1, two stop bits
+ /// are transmitted at the end of the frame. The receive
+ /// logic does not check for two stop bits being received.
+ pub two_stops_bits: bool,
+ /// EPS Even parity select. Controls the type of parity the UART uses
+ /// during transmission and reception:
+ /// - 0 = odd parity. The UART generates or checks for an odd number of
+ /// 1s in the data and parity bits.
+ /// - 1 = even parity. The UART generates or checks for an even number
+ /// of 1s in the data and parity bits.
+ /// This bit has no effect when the `PEN` bit disables parity checking
+ /// and generation. See Table 3-11 on page 3-14 for the parity
+ /// truth table.
+ pub parity: Parity,
+ /// 1 PEN Parity enable:
+ ///
+ /// - 0 = parity is disabled and no parity bit added to the data frame
+ /// - 1 = parity checking and generation is enabled.
+ ///
+ /// See Table 3-11 on page 3-14 for the parity truth table.
+ pub parity_enabled: bool,
+ /// BRK Send break.
+ ///
+ /// If this bit is set to `1`, a low-level is continually output on the
+ /// `UARTTXD` output, after completing transmission of the
+ /// current character. For the proper execution of the break command,
+ /// the software must set this bit for at least two complete
+ /// frames. For normal use, this bit must be cleared to `0`.
+ pub send_break: bool,
+ }
+
+ impl LineControl {
+ pub fn reset(&mut self) {
+ // All the bits are cleared to 0 when reset.
+ *self = 0.into();
+ }
+ }
+
+ impl Default for LineControl {
+ fn default() -> Self {
+ 0.into()
+ }
+ }
+
+ #[bitsize(1)]
+ #[derive(Clone, Copy, Debug, Eq, FromBits, PartialEq)]
+ /// `EPS` "Even parity select", field of [Line Control
+ /// register](LineControl).
+ pub enum Parity {
+ /// - 0 = odd parity. The UART generates or checks for an odd number of
+ /// 1s in the data and parity bits.
+ Odd = 0,
+ /// - 1 = even parity. The UART generates or checks for an even number
+ /// of 1s in the data and parity bits.
+ Even = 1,
+ }
+
+ #[bitsize(1)]
+ #[derive(Clone, Copy, Debug, Eq, FromBits, PartialEq)]
+ /// `FEN` "Enable FIFOs" or Device mode, field of [Line Control
+ /// register](LineControl).
+ pub enum Mode {
+ /// 0 = FIFOs are disabled (character mode) that is, the FIFOs become
+ /// 1-byte-deep holding registers
+ Character = 0,
+ /// 1 = transmit and receive FIFO buffers are enabled (FIFO mode).
+ FIFO = 1,
+ }
+
+ impl From<Mode> for bool {
+ fn from(val: Mode) -> Self {
+ matches!(val, Mode::FIFO)
+ }
+ }
+
+ #[bitsize(2)]
+ #[derive(Clone, Copy, Debug, Eq, FromBits, PartialEq)]
+ /// `WLEN` Word length, field of [Line Control register](LineControl).
+ ///
+ /// These bits indicate the number of data bits transmitted or received in
a
+ /// frame as follows:
+ pub enum WordLength {
+ /// b11 = 8 bits
+ _8Bits = 0b11,
+ /// b10 = 7 bits
+ _7Bits = 0b10,
+ /// b01 = 6 bits
+ _6Bits = 0b01,
+ /// b00 = 5 bits.
+ _5Bits = 0b00,
+ }
+
+ /// Control Register, `UARTCR`
+ ///
+ /// The `UARTCR` register is the control register. All the bits are cleared
+ /// to `0` on reset except for bits `9` and `8` that are set to `1`.
+ ///
+ /// # Source
+ /// ARM DDI 0183G, 3.3.8 Control Register, `UARTCR`, Table 3-12
+ #[bitsize(16)]
+ #[doc(alias = "UARTCR")]
+ #[derive(Clone, Copy, DebugBits, FromBits)]
+ pub struct Control {
+ /// `UARTEN` UART enable: 0 = UART is disabled. If the UART is disabled
+ /// in the middle of transmission or reception, it completes the
current
+ /// character before stopping. 1 = the UART is enabled. Data
+ /// transmission and reception occurs for either UART signals or SIR
+ /// signals depending on the setting of the SIREN bit.
+ pub enable_uart: bool,
+ /// `SIREN` `SIR` enable: 0 = IrDA SIR ENDEC is disabled. `nSIROUT`
+ /// remains LOW (no light pulse generated), and signal transitions on
+ /// SIRIN have no effect. 1 = IrDA SIR ENDEC is enabled. Data is
+ /// transmitted and received on nSIROUT and SIRIN. UARTTXD remains
HIGH,
+ /// in the marking state. Signal transitions on UARTRXD or modem status
+ /// inputs have no effect. This bit has no effect if the UARTEN bit
+ /// disables the UART.
+ pub enable_sir: bool,
+ /// `SIRLP` SIR low-power IrDA mode. This bit selects the IrDA encoding
+ /// mode. If this bit is cleared to 0, low-level bits are transmitted
as
+ /// an active high pulse with a width of 3/ 16th of the bit period. If
+ /// this bit is set to 1, low-level bits are transmitted with a pulse
+ /// width that is 3 times the period of the IrLPBaud16 input signal,
+ /// regardless of the selected bit rate. Setting this bit uses less
+ /// power, but might reduce transmission distances.
+ pub sir_lowpower_irda_mode: u1,
+ /// Reserved, do not modify, read as zero.
+ _reserved_zero_no_modify: u4,
+ /// `LBE` Loopback enable. If this bit is set to 1 and the SIREN bit is
+ /// set to 1 and the SIRTEST bit in the Test Control register, UARTTCR
+ /// on page 4-5 is set to 1, then the nSIROUT path is inverted, and fed
+ /// through to the SIRIN path. The SIRTEST bit in the test register
must
+ /// be set to 1 to override the normal half-duplex SIR operation. This
+ /// must be the requirement for accessing the test registers during
+ /// normal operation, and SIRTEST must be cleared to 0 when loopback
+ /// testing is finished. This feature reduces the amount of external
+ /// coupling required during system test. If this bit is set to 1, and
+ /// the SIRTEST bit is set to 0, the UARTTXD path is fed through to the
+ /// UARTRXD path. In either SIR mode or UART mode, when this bit is
set,
+ /// the modem outputs are also fed through to the modem inputs. This
bit
+ /// is cleared to 0 on reset, to disable loopback.
+ pub enable_loopback: bool,
+ /// `TXE` Transmit enable. If this bit is set to 1, the transmit
section
+ /// of the UART is enabled. Data transmission occurs for either UART
+ /// signals, or SIR signals depending on the setting of the SIREN bit.
+ /// When the UART is disabled in the middle of transmission, it
+ /// completes the current character before stopping.
+ pub enable_transmit: bool,
+ /// `RXE` Receive enable. If this bit is set to 1, the receive section
+ /// of the UART is enabled. Data reception occurs for either UART
+ /// signals or SIR signals depending on the setting of the SIREN bit.
+ /// When the UART is disabled in the middle of reception, it completes
+ /// the current character before stopping.
+ pub enable_receive: bool,
+ /// `DTR` Data transmit ready. This bit is the complement of the UART
+ /// data transmit ready, `nUARTDTR`, modem status output. That is, when
+ /// the bit is programmed to a 1 then `nUARTDTR` is LOW.
+ pub data_transmit_ready: bool,
+ /// `RTS` Request to send. This bit is the complement of the UART
+ /// request to send, `nUARTRTS`, modem status output. That is, when the
+ /// bit is programmed to a 1 then `nUARTRTS` is LOW.
+ pub request_to_send: bool,
+ /// `Out1` This bit is the complement of the UART Out1 (`nUARTOut1`)
+ /// modem status output. That is, when the bit is programmed to a 1 the
+ /// output is 0. For DTE this can be used as Data Carrier Detect (DCD).
+ pub out_1: bool,
+ /// `Out2` This bit is the complement of the UART Out2 (`nUARTOut2`)
+ /// modem status output. That is, when the bit is programmed to a 1,
the
+ /// output is 0. For DTE this can be used as Ring Indicator (RI).
+ pub out_2: bool,
+ /// `RTSEn` RTS hardware flow control enable. If this bit is set to 1,
+ /// RTS hardware flow control is enabled. Data is only requested when
+ /// there is space in the receive FIFO for it to be received.
+ pub rts_hardware_flow_control_enable: bool,
+ /// `CTSEn` CTS hardware flow control enable. If this bit is set to 1,
+ /// CTS hardware flow control is enabled. Data is only transmitted when
+ /// the `nUARTCTS` signal is asserted.
+ pub cts_hardware_flow_control_enable: bool,
+ }
+
+ impl Control {
+ pub fn reset(&mut self) {
+ *self = 0.into();
+ self.set_enable_receive(true);
+ self.set_enable_transmit(true);
+ }
+ }
+
+ impl Default for Control {
+ fn default() -> Self {
+ let mut ret: Self = 0.into();
+ ret.reset();
+ ret
+ }
+ }
+
+ /// Interrupt status bits in UARTRIS, UARTMIS, UARTIMSC
+ pub const INT_OE: u32 = 1 << 10;
+ pub const INT_BE: u32 = 1 << 9;
+ pub const INT_PE: u32 = 1 << 8;
+ pub const INT_FE: u32 = 1 << 7;
+ pub const INT_RT: u32 = 1 << 6;
+ pub const INT_TX: u32 = 1 << 5;
+ pub const INT_RX: u32 = 1 << 4;
+ pub const INT_DSR: u32 = 1 << 3;
+ pub const INT_DCD: u32 = 1 << 2;
+ pub const INT_CTS: u32 = 1 << 1;
+ pub const INT_RI: u32 = 1 << 0;
+ pub const INT_E: u32 = INT_OE | INT_BE | INT_PE | INT_FE;
+ pub const INT_MS: u32 = INT_RI | INT_DSR | INT_DCD | INT_CTS;
+
+ #[repr(u32)]
+ pub enum Interrupt {
+ OE = 1 << 10,
+ BE = 1 << 9,
+ PE = 1 << 8,
+ FE = 1 << 7,
+ RT = 1 << 6,
+ TX = 1 << 5,
+ RX = 1 << 4,
+ DSR = 1 << 3,
+ DCD = 1 << 2,
+ CTS = 1 << 1,
+ RI = 1 << 0,
+ }
+
+ impl Interrupt {
+ pub const E: u32 = INT_OE | INT_BE | INT_PE | INT_FE;
+ pub const MS: u32 = INT_RI | INT_DSR | INT_DCD | INT_CTS;
+ }
+}
+
+// TODO: You must disable the UART before any of the control registers are
+// reprogrammed. When the UART is disabled in the middle of transmission or
+// reception, it completes the current character before stopping
diff --git a/rust/hw/char/pl011/src/memory_ops.rs
b/rust/hw/char/pl011/src/memory_ops.rs
new file mode 100644
index 0000000000..6144d28586
--- /dev/null
+++ b/rust/hw/char/pl011/src/memory_ops.rs
@@ -0,0 +1,45 @@
+// Copyright 2024 Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
+// SPDX-License-Identifier: GPL-2.0 OR GPL-3.0-or-later
+
+use core::{mem::MaybeUninit, ptr::NonNull};
+
+use qemu_api::bindings::*;
+
+use crate::device::PL011State;
+
+pub static PL011_OPS: MemoryRegionOps = MemoryRegionOps {
+ read: Some(pl011_read),
+ write: Some(pl011_write),
+ read_with_attrs: None,
+ write_with_attrs: None,
+ endianness: device_endian_DEVICE_NATIVE_ENDIAN,
+ valid: unsafe {
MaybeUninit::<MemoryRegionOps__bindgen_ty_1>::zeroed().assume_init() },
+ impl_: MemoryRegionOps__bindgen_ty_2 {
+ min_access_size: 4,
+ max_access_size: 4,
+ ..unsafe {
MaybeUninit::<MemoryRegionOps__bindgen_ty_2>::zeroed().assume_init() }
+ },
+};
+
+#[no_mangle]
+unsafe extern "C" fn pl011_read(
+ opaque: *mut core::ffi::c_void,
+ addr: hwaddr,
+ size: core::ffi::c_uint,
+) -> u64 {
+ assert!(!opaque.is_null());
+ let mut state = NonNull::new_unchecked(opaque.cast::<PL011State>());
+ state.as_mut().read(addr, size)
+}
+
+#[no_mangle]
+unsafe extern "C" fn pl011_write(
+ opaque: *mut core::ffi::c_void,
+ addr: hwaddr,
+ data: u64,
+ _size: core::ffi::c_uint,
+) {
+ assert!(!opaque.is_null());
+ let mut state = NonNull::new_unchecked(opaque.cast::<PL011State>());
+ state.as_mut().write(addr, data)
+}
diff --git a/rust/hw/meson.build b/rust/hw/meson.build
new file mode 100644
index 0000000000..860196645e
--- /dev/null
+++ b/rust/hw/meson.build
@@ -0,0 +1 @@
+subdir('char')
diff --git a/rust/meson.build b/rust/meson.build
index a903c7c602..4c858e9d1f 100644
--- a/rust/meson.build
+++ b/rust/meson.build
@@ -11,3 +11,5 @@ _lib_bindings_rs = static_library(
)
subdir('qemu-api')
+
+subdir('hw')
--
γαῖα πυρί μιχθήτω
- [RFC PATCH v5 3/8] CI: Add build-system-rust-debian job, (continued)
[RFC PATCH v5 4/8] rust: add bindgen step as a meson dependency, Manos Pitsidianakis, 2024/07/22
[RFC PATCH v5 5/8] .gitattributes: add Rust diff and merge attributes, Manos Pitsidianakis, 2024/07/22
[RFC PATCH v5 6/8] rust: add crate to expose bindings and interfaces, Manos Pitsidianakis, 2024/07/22
[RFC PATCH v5 7/8] rust: add PL011 device model,
Manos Pitsidianakis <=
[RFC PATCH v5 8/8] rust/pl011: vendor dependencies, Manos Pitsidianakis, 2024/07/22
Re: [RFC PATCH v5 0/8] Add Rust support, implement ARM PL011, Paolo Bonzini, 2024/07/23
- Re: [RFC PATCH v5 0/8] Add Rust support, implement ARM PL011, Manos Pitsidianakis, 2024/07/24
- Re: [RFC PATCH v5 0/8] Add Rust support, implement ARM PL011, Paolo Bonzini, 2024/07/24
- Re: [RFC PATCH v5 0/8] Add Rust support, implement ARM PL011, Manos Pitsidianakis, 2024/07/25
- Re: [RFC PATCH v5 0/8] Add Rust support, implement ARM PL011, Paolo Bonzini, 2024/07/25
- Re: [RFC PATCH v5 0/8] Add Rust support, implement ARM PL011, Manos Pitsidianakis, 2024/07/25
- Re: [RFC PATCH v5 0/8] Add Rust support, implement ARM PL011, Paolo Bonzini, 2024/07/25