[PULL 04/11] docs/devel: Add introduction to LUKS volume with detached header

[Daniel P . Berrangé]

From: Hyman Huang <yong.huang@smartx.com>

Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
---
 MAINTAINERS                         |   1 +
 docs/devel/crypto.rst               |  10 ++
 docs/devel/index-internals.rst      |   1 +
 docs/devel/luks-detached-header.rst | 182 ++++++++++++++++++++++++++++
 4 files changed, 194 insertions(+)
 create mode 100644 docs/devel/crypto.rst
 create mode 100644 docs/devel/luks-detached-header.rst

diff --git a/MAINTAINERS b/MAINTAINERS
index 73040829b1..98eddf7ae1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3451,6 +3451,7 @@ Detached LUKS header
 M: Hyman Huang <yong.huang@smartx.com>
 S: Maintained
 F: tests/qemu-iotests/tests/luks-detached-header
+F: docs/devel/luks-detached-header.rst
 
 D-Bus
 M: Marc-André Lureau <marcandre.lureau@redhat.com>
diff --git a/docs/devel/crypto.rst b/docs/devel/crypto.rst
new file mode 100644
index 0000000000..39b1c910e7
--- /dev/null
+++ b/docs/devel/crypto.rst
@@ -0,0 +1,10 @@
+.. _crypto-ref:
+
+====================
+Cryptography in QEMU
+====================
+
+.. toctree::
+   :maxdepth: 2
+
+   luks-detached-header
diff --git a/docs/devel/index-internals.rst b/docs/devel/index-internals.rst
index 5636e9cf1d..4ac7725d72 100644
--- a/docs/devel/index-internals.rst
+++ b/docs/devel/index-internals.rst
@@ -20,3 +20,4 @@ Details about QEMU's various subsystems including how to add 
features to them.
    vfio-iommufd
    writing-monitor-commands
    virtio-backends
+   crypto
diff --git a/docs/devel/luks-detached-header.rst 
b/docs/devel/luks-detached-header.rst
new file mode 100644
index 0000000000..94ec285c27
--- /dev/null
+++ b/docs/devel/luks-detached-header.rst
@@ -0,0 +1,182 @@
+================================
+LUKS volume with detached header
+================================
+
+Introduction
+============
+
+This document gives an overview of the design of LUKS volume with detached
+header and how to use it.
+
+Background
+==========
+
+The LUKS format has ability to store the header in a separate volume from
+the payload. We could extend the LUKS driver in QEMU to support this use
+case.
+
+Normally a LUKS volume has a layout:
+
+::
+
+         +-----------------------------------------------+
+         |         |                |                    |
+ disk    | header  |  key material  |  disk payload data |
+         |         |                |                    |
+         +-----------------------------------------------+
+
+With a detached LUKS header, you need 2 disks so getting:
+
+::
+
+         +--------------------------+
+ disk1   |   header  | key material |
+         +--------------------------+
+         +---------------------+
+ disk2   |  disk payload data  |
+         +---------------------+
+
+There are a variety of benefits to doing this:
+
+ * Secrecy - the disk2 cannot be identified as containing LUKS
+             volume since there's no header
+ * Control - if access to the disk1 is restricted, then even
+             if someone has access to disk2 they can't unlock
+             it. Might be useful if you have disks on NFS but
+             want to restrict which host can launch a VM
+             instance from it, by dynamically providing access
+             to the header to a designated host
+ * Flexibility - your application data volume may be a given
+                 size and it is inconvenient to resize it to
+                 add encryption.You can store the LUKS header
+                 separately and use the existing storage
+                 volume for payload
+ * Recovery - corruption of a bit in the header may make the
+              entire payload inaccessible. It might be
+              convenient to take backups of the header. If
+              your primary disk header becomes corrupt, you
+              can unlock the data still by pointing to the
+              backup detached header
+
+Architecture
+============
+
+Take the qcow2 encryption, for example. The architecture of the
+LUKS volume with detached header is shown in the diagram below.
+
+There are two children of the root node: a file and a header.
+Data from the disk payload is stored in the file node. The
+LUKS header and key material are located in the header node,
+as previously mentioned.
+
+::
+
+                       +-----------------------------+
+  Root node            |          foo[luks]          |
+                       +-----------------------------+
+                          |                       |
+                     file |                header |
+                          |                       |
+               +---------------------+    +------------------+
+  Child node   |payload-format[qcow2]|    |header-format[raw]|
+               +---------------------+    +------------------+
+                          |                       |
+                     file |                 file  |
+                          |                       |
+               +----------------------+  +---------------------+
+  Child node   |payload-protocol[file]|  |header-protocol[file]|
+               +----------------------+  +---------------------+
+                          |                       |
+                          |                       |
+                          |                       |
+                     Host storage            Host storage
+
+Usage
+=====
+
+Create a LUKS disk with a detached header using qemu-img
+--------------------------------------------------------
+
+Shell commandline::
+
+  # qemu-img create --object secret,id=sec0,data=abc123 -f luks \
+    -o cipher-alg=aes-256,cipher-mode=xts -o key-secret=sec0 \
+    -o detached-header=true test-header.img
+  # qemu-img create -f qcow2 test-payload.qcow2 200G
+  # qemu-img info 'json:{"driver":"luks","file":{"filename": \
+    "test-payload.img"},"header":{"filename":"test-header.img"}}'
+
+Set up a VM's LUKS volume with a detached header
+------------------------------------------------
+
+Qemu commandline::
+
+  # qemu-system-x86_64 ... \
+    -object '{"qom-type":"secret","id":"libvirt-3-format-secret", \
+    "data":"abc123"}' \
+    -blockdev '{"driver":"file","filename":"/path/to/test-header.img", \
+    "node-name":"libvirt-1-storage"}' \
+    -blockdev '{"node-name":"libvirt-1-format","read-only":false, \
+    "driver":"raw","file":"libvirt-1-storage"}' \
+    -blockdev '{"driver":"file","filename":"/path/to/test-payload.qcow2", \
+    "node-name":"libvirt-2-storage"}' \
+    -blockdev '{"node-name":"libvirt-2-format","read-only":false, \
+    "driver":"qcow2","file":"libvirt-2-storage"}' \
+    -blockdev '{"node-name":"libvirt-3-format","driver":"luks", \
+    "file":"libvirt-2-format","header":"libvirt-1-format","key-secret": \
+    "libvirt-3-format-secret"}' \
+    -device '{"driver":"virtio-blk-pci","bus":XXX,"addr":YYY,"drive": \
+    "libvirt-3-format","id":"virtio-disk1"}'
+
+Add LUKS volume to a VM with a detached header
+----------------------------------------------
+
+1. object-add the secret for decrypting the cipher stored in
+   LUKS header above::
+
+    # virsh qemu-monitor-command vm '{"execute":"object-add", \
+      "arguments":{"qom-type":"secret", "id": \
+      "libvirt-4-format-secret", "data":"abc123"}}'
+
+2. block-add the protocol node for LUKS header::
+
+    # virsh qemu-monitor-command vm '{"execute":"blockdev-add", \
+      "arguments":{"node-name":"libvirt-1-storage", "driver":"file", \
+      "filename": "/path/to/test-header.img" }}'
+
+3. block-add the raw-drived node for LUKS header::
+
+    # virsh qemu-monitor-command vm '{"execute":"blockdev-add", \
+      "arguments":{"node-name":"libvirt-1-format", "driver":"raw", \
+      "file":"libvirt-1-storage"}}'
+
+4. block-add the protocol node for disk payload image::
+
+    # virsh qemu-monitor-command vm '{"execute":"blockdev-add", \
+      "arguments":{"node-name":"libvirt-2-storage", "driver":"file", \
+      "filename":"/path/to/test-payload.qcow2"}}'
+
+5. block-add the qcow2-drived format node for disk payload data::
+
+    # virsh qemu-monitor-command vm '{"execute":"blockdev-add", \
+      "arguments":{"node-name":"libvirt-2-format", "driver":"qcow2", \
+      "file":"libvirt-2-storage"}}'
+
+6. block-add the luks-drived format node to link the qcow2 disk
+   with the LUKS header by specifying the field "header"::
+
+    # virsh qemu-monitor-command vm '{"execute":"blockdev-add", \
+      "arguments":{"node-name":"libvirt-3-format", "driver":"luks", \
+      "file":"libvirt-2-format", "header":"libvirt-1-format", \
+      "key-secret":"libvirt-2-format-secret"}}'
+
+7. hot-plug the virtio-blk device finally::
+
+    # virsh qemu-monitor-command vm '{"execute":"device_add", \
+      "arguments": {"driver":"virtio-blk-pci", \
+      "drive": "libvirt-3-format", "id":"virtio-disk2"}}
+
+TODO
+====
+
+1. Support the shared detached LUKS header within the VM.
-- 
2.45.2