[PATCH-for-9.1 v2 2/2] hw/pci-host/gt64120: Set PCI base address register write mask

[Philippe Mathieu-Daudé]

When booting Linux we see:

  PCI host bridge to bus 0000:00
  pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
  pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
  pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
  pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
  pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
  pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
  pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size)
  pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size)

This is due to missing base address register write mask.
Add it to get:

  PCI host bridge to bus 0000:00
  pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
  pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
  pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
  pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff pref]
  pci 0000:00:00.0: reg 0x14: [mem 0x01000000-0x01000fff pref]
  pci 0000:00:00.0: reg 0x18: [mem 0x1c000000-0x1c000fff]
  pci 0000:00:00.0: reg 0x1c: [mem 0x1f000000-0x1f000fff]
  pci 0000:00:00.0: reg 0x20: [mem 0x1be00000-0x1be00fff]
  pci 0000:00:00.0: reg 0x24: [io  0x14000000-0x14000007]

Mention the datasheet referenced. Remove the "Malta assumptions ahead"
comment since the reset values from the datasheet are used.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 hw/pci-host/gt64120.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/hw/pci-host/gt64120.c b/hw/pci-host/gt64120.c
index b68d647753..344baf55db 100644
--- a/hw/pci-host/gt64120.c
+++ b/hw/pci-host/gt64120.c
@@ -1224,6 +1224,13 @@ static void gt64120_pci_reset_hold(Object *obj, 
ResetType type)
                  PCI_STATUS_FAST_BACK | PCI_STATUS_DEVSEL_MEDIUM);
     pci_config_set_prog_interface(d->config, 0);
 
+    pci_set_long(d->wmask + PCI_BASE_ADDRESS_0, 0xfffff009);
+    pci_set_long(d->wmask + PCI_BASE_ADDRESS_1, 0xfffff009);
+    pci_set_long(d->wmask + PCI_BASE_ADDRESS_2, 0xfffff009);
+    pci_set_long(d->wmask + PCI_BASE_ADDRESS_3, 0xfffff009);
+    pci_set_long(d->wmask + PCI_BASE_ADDRESS_4, 0xfffff009);
+    pci_set_long(d->wmask + PCI_BASE_ADDRESS_5, 0xfffff001);
+
     pci_set_long(d->config + PCI_BASE_ADDRESS_0, 0x00000008);
     pci_set_long(d->config + PCI_BASE_ADDRESS_1, 0x01000008);
     pci_set_long(d->config + PCI_BASE_ADDRESS_2, 0x1c000000);
-- 
2.45.2