Re: [Usbb2k-api-dev] P4K Development

[yasha]

Hello,

sorry I have now not very lot of time to work on this project. 
There the dmsg output when I connect a usb-p1K:

[4442678.279000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[4442679.363000] usbcore: registered new driver hiddev
[4442679.377000] hiddev96: USB HID v1.00 Device [Yealink Network Technology Ltd. VOIP USB Phone           ] on usb-0000:00:1d.0-1
[4442679.377000] usbcore: registered new driver usbhid
[4442679.377000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[4442679.622000] usbcore: registered new driver snd-usb-audio

and a cat /proc/bus/usb/devices:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=6993 ProdID=b001 Rev= 0.00
S:  Manufacturer=Yealink Network Technology Ltd.
S:  Product=VOIP USB Phone
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
I:  If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I:  If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E:  Ad=82(I) Atr=01(Isoc) MxPS=  16 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I:  If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E:  Ad=04(O) Atr=01(Isoc) MxPS=  16 Ivl=1ms
I:  If#= 3 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=20ms


And these is for the usb-p2k
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=6993 ProdID=b001 Rev= 1.10
S:  Manufacturer=Yealink Network Technology Ltd.
S:  Product=VOIP USB Phone
S:  SerialNumber=????
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
I:  If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I:  If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E:  Ad=88(I) Atr=01(Isoc) MxPS=  16 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I:  If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E:  Ad=08(O) Atr=01(Isoc) MxPS=  16 Ivl=1ms
I:  If#= 3 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=20ms


I hope that it will help you.

Best regards,
Olivier 

Le dimanche 12 février 2006 à 10:51 +0000, Adam J. P. Wood a écrit :
>     
>