Re: [Denemo-devel] Context Error

[alex stone]

That did the trick.
Thanks for the heads up.

Alex.

On Mon, Dec 14, 2009 at 9:17 PM, alex stone <address@hidden> wrote:
> Ok, i'll try my version without instrument names, and see what happens.
>
>
>
> On Mon, Dec 14, 2009 at 8:48 PM, Richard Shann <address@hidden> wrote:
>> Well, I can't see any errors,
>> attached is a simple example, three staffs with the second and third
>> making a staff group.
>> The lilypond looks fine but it prints out wrongly. I guess there are a
>> few more bits to chop out (the intrument name syntax changed at some
>> point...)
>> ah, yes, if I chop out the instrument names it is ok. Someone will have
>> to investigate the instrument name syntax (perhaps it has to be
>> differently placed...)
>>
>> Richard
>>
>>
>> On Mon, 2009-12-14 at 20:20 +0300, alex stone wrote:
>>> Ok, i've started a new test project and so far it works correctly, so
>>> i guess it's not worth wasting anytime on the posted one.
>>>
>>> Sorry for the noise.
>>>
>>> Alex.
>>>
>>> On Mon, Dec 14, 2009 at 8:17 PM, alex stone <address@hidden> wrote:
>>> > I've been through every staff to ensure there's no incomplete starts
>>> > and ends, and the result is still the same.
>>> > This is a recent phenomenon, and up until the last week (i think),
>>> > this wasn't a problem.
>>> >
>>> > http://stashbox.org/735015/Context2.png
>>> >
>>> > Anyway, it's cropped up suddenly, and i'd be interested to know if
>>> > other denemo users have this, or it's just my setup somewhere.
>>> >
>>> > Here's the denemo project used in this test, if it's any help.
>>> >
>>> > http://stashbox.org/735025/siberian%20tales%20notate1.denemo
>>> >
>>> > Alex.
>>> >
>>> >
>>> >
>>> >
>>> > On Mon, Dec 14, 2009 at 7:11 PM, Richard Shann <address@hidden> wrote:
>>> >> On Mon, 2009-12-14 at 17:54 +0300, alex stone wrote:
>>> >>> Moving on with testing, and the following appears when i try to set
>>> >>> context for a project.
>>> >>>
>>> >>> Although this picture is of the 1st violins as Context Start, the same
>>> >>> happens for all context based directives, when applied from staff
>>> >>> properties. (Piano, Choir, etc...)
>>> >>>
>>> >>> http://stashbox.org/734849/Context1.png
>>> >>>
>>> >>>
>>> >> This is, I think, a context start without a context end. I'm guessing
>>> >> this from the console message about a missing >> which would end the
>>> >> context - these are LilyPond contexts set up by applying the context
>>> >> start or end properties to the appropriate staffs from the
>>> >> staffpropdialog. This is all old built-in stuff, there is no checking
>>> >> for you, and nothing to show you if a staff is set as a context start or
>>> >> context end. :-(
>>> >> you have to step through the staffs looking at the props dialog to see
>>> >> which contexts are set. (Unless you can read the LilyPond, where you can
>>> >> see which one starts or stops wrongly).
>>> >> Richard
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >
>>> >
>>> >
>>> > --
>>> > www.openoctave.org
>>> >
>>> > address@hidden
>>> > address@hidden
>>> >
>>>
>>>
>>>
>>
>> _______________________________________________
>> Denemo-devel mailing list
>> address@hidden
>> http://lists.gnu.org/mailman/listinfo/denemo-devel
>>
>>
>
>
>
> --
> www.openoctave.org
>
> address@hidden
> address@hidden
>



-- 
www.openoctave.org

address@hidden
address@hidden