[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Default FPGA I/O standard
From: |
Matt Ettus |
Subject: |
Re: [Discuss-gnuradio] Default FPGA I/O standard |
Date: |
Mon, 01 Oct 2007 16:09:21 -0700 |
User-agent: |
Thunderbird 2.0.0.0 (X11/20070326) |
Nirali Patel wrote:
> Hi Matt,
>
> I modified the usrp_std.v file to make connections to the debug IO pins and
> then on my PC tried to compile the project using Quartus II software. The
> compile went successfully, but later when I opened the Pin-Out file under
> Compilation Report all the signals showed at 3.3V-LVTTL. I had only clicked
> on the play button after opening the .qpf project.
> I would like to know if the default settings are still all 3.3V LVCMOS and I
> inadvertently changed something. If not, I would like to set the 16-bit
> debug pins to LVCMOS since I am trying to attach a CMOS cable to the pins on
> basic RX. Could you recommend a way to do this? Do I have to look at IO
> banking rules etc.? I have some FPGA background but not a whole lot.
>
I think 3.3V LVTTL and LVCMOS are really the same.
Matt