[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Shielding on 2.4GHz
From: |
Martin Dvh |
Subject: |
Re: [Discuss-gnuradio] Shielding on 2.4GHz |
Date: |
Thu, 31 Jan 2008 02:36:14 +0100 |
User-agent: |
Icedove 1.5.0.14pre (X11/20071018) |
DiX wrote:
> Hi everyone,
>
> I am using FLEX2400 d'boards to transmit and receive 802.11b packets
> with codes from bbn and gnuradio_example/python/digital. The problem is the
> d'board is always interferenced by some CISCO access points and other
> wireless cards located right outside of my lab.
>
> I connect the usrp to my pc with a cable (-30db attenuator applied). I
> hope it receives nothing but packets from my pc. But the d'board can still
> get packets from other wireless card. Then I put the m'b and d'b into the
> black enclosure. Packets still come in. And finally, I put everything (m'b,
> d'b, black box, attenuator) in my metal drower. Most packets are shielded
> out. Some still can be caputured and demodulated.%-|
>
> why is the d'b able to hear others even when I connect attenuators and
> cable to its antenna?
>
> -DX
It might pick it up on the 6V power cable.
You could try putting ferrite beads around the power cable to reduce this.
greetings,
Martin