Re: [Discuss-gnuradio] USRP2 firmware build error

[Stefan Fehrle]

Eric Blossom schrieb:
> On Tue, Mar 30, 2010 at 12:05:25PM +0200, Stefan Fehrle wrote:
>>
>> Eric Blossom schrieb:
>> > On Tue, Mar 30, 2010 at 08:38:08AM +0200, Stefan Fehrle wrote:
>> >>
>> >> I wanted to build the USRP2 firmware to enable the testclk at J503,
>> but
>> >> I
>> >> have some errors. I download the source with the command "git clone
>> >> git://gnuradio.org/gnuradio
>> >> " and the mb-gcc from http://gnuradio.org/tools/
>> >>
>> >> Then I execute the commands "./bootstrap" and "./configure.gnu
>> >> MB_GCC=/usr/local/bin/microblaze/bin/mb-gcc". I have no errors or
>> >> warnings. Then I execute the command "make" and I have the following
>> >> errors:
>> >
>> > If you're building from the firmware directory you must use:
>> >
>> >   # If in firmware directory
>> >   ./boostrap && ./configure.gnu
>> >
>> > This will get you the correct compiler.
>> >
>> > If you build the host code and the firmware from the top of the build,
>> > you only need to do
>> >
>> >   # If at top of build tree
>> >   ./bootstrap && ./configure
>> >
>> >> address@hidden:/usr/local/src/gnuradio/usrp2/firmware# make
>> >> make  all-recursive
>> >> make[1]: Entering directory `/usr/local/src/gnuradio/usrp2/firmware'
>> >> Making all in config
>> >> make[2]: Entering directory
>> >> `/usr/local/src/gnuradio/usrp2/firmware/config'
>> >> make[2]: Nothing to be done for `all'.
>> >> make[2]: Leaving directory
>> >> `/usr/local/src/gnuradio/usrp2/firmware/config'
>> >> Making all in include
>> >> make[2]: Entering directory
>> >> `/usr/local/src/gnuradio/usrp2/firmware/include'
>> >> make[2]: Nothing to be done for `all'.
>> >> make[2]: Leaving directory
>> >> `/usr/local/src/gnuradio/usrp2/firmware/include'
>> >> Making all in lib
>> >> make[2]: Entering directory
>> `/usr/local/src/gnuradio/usrp2/firmware/lib'
>> >> gcc -DHAVE_CONFIG_H -I. -I..  -DHAL_IO_USES_UART  -I../include
>> -I../lib
>> >> --std=gnu99 -Wall -Werror-implicit-function-declaration -mxl-soft-div
>> >> -msoft-float -mxl-soft-mul -mxl-barrel-shift -O2 -MT abort.o -MD -MP
>> -MF
>> >> .deps/abort.Tpo -c -o abort.o abort.c
>> >> cc1: error: unrecognized command line option "-mxl-soft-div"
>> >> cc1: error: unrecognized command line option "-mxl-soft-mul"
>> >> cc1: error: unrecognized command line option "-mxl-barrel-shift"
>> >> make[2]: *** [abort.o] Error 1
>> >> make[2]: Leaving directory
>> `/usr/local/src/gnuradio/usrp2/firmware/lib'
>> >> make[1]: *** [all-recursive] Error 1
>> >> make[1]: Leaving directory `/usr/local/src/gnuradio/usrp2/firmware'
>> >> make: *** [all] Error 2
>> >> address@hidden:/usr/local/src/gnuradio/usrp2/firmware#
>> >>
>> >>
>> >> I use Kubuntu 9.04
>> >>
>> >
>
>> I did this but it dosen't solve the problem of executing the command
>> "make"
>
> Sorry, try this:
>
>   $ export PATH=/usr/local/bin/microblaze/bin:$PATH
>   $ ./bootstrap && ./configure.gnu
>   $ make
>
> Eric
>
>

Now I can build the firmware.

When I copy "txrx.bin" from the subfolder apps to the sd-card. I can't
connect to the USRP2. The led e and f burns. The GNU Radio Companion (GRC)
stops the program with the error message "RuntimeError: No USRPs found on
interface eth1".

When I copy "txrx.bin" from
http://gnuradio.org/releases/usrp2-bin/release/ on the same sd-card I have
no errors and the programm runs perfect.

Where did I make the misatke?