Re: [Discuss-gnuradio] USRP2 firmware build error

[Stefan Fehrle]

Eric Blossom schrieb:
> On Tue, Mar 30, 2010 at 08:38:08AM +0200, Stefan Fehrle wrote:
>>
>> I wanted to build the USRP2 firmware to enable the testclk at J503, but
>> I
>> have some errors. I download the source with the command "git clone
>> git://gnuradio.org/gnuradio
>> " and the mb-gcc from http://gnuradio.org/tools/
>>
>> Then I execute the commands "./bootstrap" and "./configure.gnu
>> MB_GCC=/usr/local/bin/microblaze/bin/mb-gcc". I have no errors or
>> warnings. Then I execute the command "make" and I have the following
>> errors:
>
> If you're building from the firmware directory you must use:
>
>   # If in firmware directory
>   ./boostrap && ./configure.gnu
>
> This will get you the correct compiler.
>
> If you build the host code and the firmware from the top of the build,
> you only need to do
>
>   # If at top of build tree
>   ./bootstrap && ./configure
>
>> address@hidden:/usr/local/src/gnuradio/usrp2/firmware# make
>> make  all-recursive
>> make[1]: Entering directory `/usr/local/src/gnuradio/usrp2/firmware'
>> Making all in config
>> make[2]: Entering directory
>> `/usr/local/src/gnuradio/usrp2/firmware/config'
>> make[2]: Nothing to be done for `all'.
>> make[2]: Leaving directory
>> `/usr/local/src/gnuradio/usrp2/firmware/config'
>> Making all in include
>> make[2]: Entering directory
>> `/usr/local/src/gnuradio/usrp2/firmware/include'
>> make[2]: Nothing to be done for `all'.
>> make[2]: Leaving directory
>> `/usr/local/src/gnuradio/usrp2/firmware/include'
>> Making all in lib
>> make[2]: Entering directory `/usr/local/src/gnuradio/usrp2/firmware/lib'
>> gcc -DHAVE_CONFIG_H -I. -I..  -DHAL_IO_USES_UART  -I../include -I../lib
>> --std=gnu99 -Wall -Werror-implicit-function-declaration -mxl-soft-div
>> -msoft-float -mxl-soft-mul -mxl-barrel-shift -O2 -MT abort.o -MD -MP -MF
>> .deps/abort.Tpo -c -o abort.o abort.c
>> cc1: error: unrecognized command line option "-mxl-soft-div"
>> cc1: error: unrecognized command line option "-mxl-soft-mul"
>> cc1: error: unrecognized command line option "-mxl-barrel-shift"
>> make[2]: *** [abort.o] Error 1
>> make[2]: Leaving directory `/usr/local/src/gnuradio/usrp2/firmware/lib'
>> make[1]: *** [all-recursive] Error 1
>> make[1]: Leaving directory `/usr/local/src/gnuradio/usrp2/firmware'
>> make: *** [all] Error 2
>> address@hidden:/usr/local/src/gnuradio/usrp2/firmware#
>>
>>
>> I use Kubuntu 9.04
>>
>
>
I did this but it dosen't solve the problem of executing the command "make"

--