[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Streaming Funcube Dongle Pro+ over UDP
From: |
Alexey Bazhin |
Subject: |
Re: [Discuss-gnuradio] Streaming Funcube Dongle Pro+ over UDP |
Date: |
Thu, 8 Aug 2013 17:34:11 +0400 |
Do you set sampling rate 192000 on both ends? Post your grc files.
On Thu, 8 Aug 2013 14:09:42 +1000
Vanush Vaswani <address@hidden> wrote:
> Hi there,
>
> I'm trying to stream the FCDPP over UDP to a another computer
> The setup is as follows
>
> FCDPP Source -> UDP Sink
>
> For the receiver,
>
> UDP Source -> LPF -> Quadrature demod -> FM Deemph -> LPF -> Audio
> sink
>
> Unfortunately, when I run the flowgraph on the receiver end, I only
> hear a bunch of clicks.
> The console is full of messages "WARN: Too much data; dropping
> packet.". WX GUI FFT Sink and Waterfall seem to work, though with the
> same messages.
>
> Any hints to rectify this issue?
--
Alexey Bazhin <address@hidden>
- [Discuss-gnuradio] Streaming Funcube Dongle Pro+ over UDP, Vanush Vaswani, 2013/08/08
- Re: [Discuss-gnuradio] Streaming Funcube Dongle Pro+ over UDP, Karan Talasila, 2013/08/08
- Re: [Discuss-gnuradio] Streaming Funcube Dongle Pro+ over UDP,
Alexey Bazhin <=
- Re: [Discuss-gnuradio] Streaming Funcube Dongle Pro+ over UDP, Vanush Vaswani, 2013/08/08
- Re: [Discuss-gnuradio] Streaming Funcube Dongle Pro+ over UDP, Marcus Müller, 2013/08/08
- Re: [Discuss-gnuradio] Streaming Funcube Dongle Pro+ over UDP, Vanush Vaswani, 2013/08/08
- Re: [Discuss-gnuradio] Streaming Funcube Dongle Pro+ over UDP, Marcus Müller, 2013/08/08
- Re: [Discuss-gnuradio] Streaming Funcube Dongle Pro+ over UDP, Vanush Vaswani, 2013/08/08
- Re: [Discuss-gnuradio] Streaming Funcube Dongle Pro+ over UDP, Iain Young, G7III, 2013/08/08
- Re: [Discuss-gnuradio] Streaming Funcube Dongle Pro+ over UDP, Vanush Vaswani, 2013/08/09