Re: [Discuss-gnuradio] PyBombs installation issue

[Nicolas Cuervo]

Hello Usman,

uhm, this is odd. So far I can see the command is correct. Although error 128 means that git did not exit cleanly, and I just run it and it ran fine. Just some guesses for now:

1. Do you have enough disk space? the recipes do not require a lot of disk space, though, but not enough space would lead to this.

2. Do you have specific cloning configuration in your gitconfig? you can check this by typing:

    git config --global --edit

 or just by editing .gitconfig which is normally located at your home directory.

3. Can you clone anything else manually? you can try running:
   

     git clone https://github.com/gnuradio/gr-recipes.git gr-recipes

  just as a test that your git is working as expected.

Please let us know if you find out something with this hypothesis I mentioned.

Cheers,

- Nicolas

On Mon, Jan 16, 2017 at 9:46 AM, Usman Haider <address@hidden> wrote:

I am following this guide to get started with RFNoC.  I am using Ubuntu 14.04 and I ran following commands

$ sudo apt-get install git
$ sudo apt-get install python-setuptools python-dev build-essential 
$ sudo easy_install pip
$ sudo pip install git+https://github.com/gnuradio/pybombs.git

When I run following command

$ pybombs -v recipes add gr-recipes git+https://github.com/gnuradio/gr-recipes.git

I get output.

.....
.....
.....
OMBS.PackageManager - DEBUG - Checking if package git is installed...
PyBOMBS.Packager.apt - DEBUG - Package git has version 1.9.1 installed
PyBOMBS.install_manager - DEBUG - Phase 2: Recursively installing source packages to prefix:
PyBOMBS.Fetcher.git - DEBUG - Requirements met.
PyBOMBS.Fetcher.git - DEBUG - Using url - https://github.com/gnuradio/gr-recipes.git
PyBOMBS._process_thread() - DEBUG - Executing command `git clone https://github.com/gnuradio/gr-recipes.git gr-recipes'
Cloning:     [                 PyBOMBS.recipes - ERROR - Could not fetch recipesCloning:     [ PyBOMBS.recipes - ERROR - Could not fetch recipes: Process returnCloning:     (100%) [=========================================================]
PyBOMBS.monitor_process() - DEBUG - Thread signaled termination or returned
PyBOMBS.monitor_process() - DEBUG - Return value: 128
PyBOMBS.recipes - ERROR - Could not fetch recipes: Process returned value: 128

What could be the issue? pybombs version is 2.3.1a. Thanks


--

Usman

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio