Re: [Dvdrtools-users] Not able to Record in DVD-Writer (Pioneer External Drive)

[Robert M. Stockmann]

On Thu, 16 Jan 2003, R Kiran wrote:

try this :

# dvdrecord -v -dao driver=mc_mdvd blank=fast speed=2 dev=0,0,0

Robert

> HI
> 
> I have External DVD-RW . I am trying this first time on Linux 8.0
> (Redhat). I am able to recognise DVD in my PC + read data on this.
> 
> I get teh following outout when I try to blank DVD-RW:-
> dvdrecord -v -dao blank=fast speed=2 dev=0,0,0
> dvdrtools v0.1.3
> Portions (c) 2002 Red Hat, Inc.
> Based on:
> Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jrg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.24
> Using libscg version 'schily-0.5'
> atapi: 0
> Device type    : Removable CD-ROM
> Version: 2
> Response Format: 2
> Capabilities: TERMIOP SYNC
> Vendor_info: 'PIONEER '
> Identifikation: 'DVD-R   DVR-S201'
> Revision: '2.02'
> Device seems to be: Generic mmc2 DVD.
> dvdrecord: Sorry, no CD/DVD-Recorder or unsupported CD/DVD-Recorder found
> on this target.
> 
> ------------------------------------
> 
> After this I downloaded cdrecord-prodvd-1.txt which is acutally a binary
> file and tried to blank DVD-RW. This time I am getting Following error:-
> 
> /utils/scratch/cdrecord-prodvd-1.txt -v blank=fast speed=1 dev=0,0,0
> Cdrecord-ProDVD-Clone 1.11a13 (i586-pc-linux-gnu) Copyright (C) 1995-2001
> Jrg Schilling
> Unlocked features:
> Limited  features:
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.24
> Using libscg version 'schily-0.5'
> atapi: 0
> Device type    : Removable CD-ROM
> Version: 2
> Response Format: 2
> Capabilities: TERMIOP SYNC
> Vendor_info: 'PIONEER '
> Identifikation: 'DVD-R   DVR-S201'
> Revision: '2.02'
> Device seems to be: Generic mmc2 DVD.
> /utils/scratch/cdrecord-prodvd-1.txt: This version of cdrecord limits
> DVD-R/DVD-RW support to -dummy or 1 GB real.
> /utils/scratch/cdrecord-prodvd-1.txt: If you need full DVD-R/DVD-RW
> support, ask the Author for cdrecord-ProDVD.
> Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
> Driver flags   : SWABAUDIO
> Supported modes: PACKET SAO SAO/R96P SAO/R96R
> /utils/scratch/cdrecord-prodvd-1.txt: Input/output error. test unit ready:
> scsi sendcmd: no error
> CDB:  00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 30 00 00 00
> Sense Key: 0x2 Not Ready, Segment 0
> Sense Code: 0x30 Qual 0x00 (incompatible medium installed) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.003s timeout 100s
> /utils/scratch/cdrecord-prodvd-1.txt: No disk / Wrong disk!
> 
> My DVD-Wrinter Shows Amber under disk indicator. It this the Problem with
> Writer ? Or am I missing something here.
> 
> If some one give me TIPS on this .
> 
> Warm Regards
> Kiran
> 
> -------------------------------------Disclaimer---------------------------------
> Sasken accepts no liability for the content of this email, or for the
> consequences of any actions taken on the basis of the information
> provided, unless that information is subsequently confirmed in writing.
> Any views or opinions presented in this email are solely those of the
> author and do not necessarily represent those of the company.
> 
> WARNING: Sasken has taken enough precautions to prevent the spread of virus,
> However due to the inherent nature of the virus the recipient should check
> this email and any attachments for the presence of viruses. The company
> accepts no liability for any damage caused by any virus transmitted by
> this email.
> -------------------------------------------------------------------------------
> 
> 
> 
> 
> _______________________________________________
> Dvdrtools-users mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
> 

-- 
Robert M. Stockmann - RHCE
Network Engineer - UNIX Consultant
crashrecovery.org  address@hidden