[gpsd-users] Is GPSD receiving PPS?

[Jon Brase]

Greetings,

I'm running GPSD on a Raspberry Pi with an Adafruit GPS hat. I know that  
the hardware supports PPS and that I've got the wiring and kernel  
configuration right because I i get timestamped assert messages with  
sequence numbers when I run "ppstest /dev/pps0". However, I am not certain  
that GPSD is actually receiving PPS data. Gpsmon does not indicate that I  
am getting any PPS data. When I run GPSD itself at debugging level 5 I do  
not get the carrier detect lines that  
http://www.catb.org/gpsd/gpsd-time-service-howto.html suggests I should be  
seeing. If I run CGPS, GPSD starts printing a bunch of lines similar to  
the following in its output:

gpsd:PROG: Changed mask:  
{ONLINE|TIME|LATLON|SPEED|TRACK|PACKET|REPORT|PPSTIME} with reliable cycle  
detection

I'm not sure if the "PPSTIME" bit indicates that I'm getting PPS or not.  
Is GPSD receiving PPS? If not, what could cause it not to receive PPS when  
the kernel is receiving PPS? "gpsd -l" indicates that GPSD is compiled  
with PPS support, and GPSD is being launched as root at boot.

Jon Brase

PS: A previous copy of this message got mangled by my mail client and sent  
out without a message body. My apologies for any confusion this may have  
caused.