Screenshots
Cross compiling 4tH:
and running it:
|
| From: | Gerardo Ballabio |
| Subject: | [Mingw-cross-env-list] gtk3 and gtkmm3 |
| Date: | Sun, 16 Aug 2015 19:22:21 +0200 |
MXE (M cross environment) is a Makefile that compiles a cross compiler and cross compiles many free libraries such as SDL and Qt. Thus, it provides a nice cross compiling environment for various target platforms, which
| Runtime | Host Triplet | Packages | |
|---|---|---|---|
| Static | Shared* | ||
| MinGW-w64 | i686-w64-mingw32 | 99% (339/341) | 62% (211/341) |
| x86_64-w64-mingw32 | 91% (311/341) | 61% (209/341) | |
These numbers were last updated on October 13, 2014. You can see the
current status by executing make build-matrix.html in the
MXE directory.
* Shared support in MXE was just added in early February, 2014. These numbers are expected to rise significantly.
First, you should ensure that your system meets MXE's requirements. You will almost certainly have to install some stuff.
When everything is fine, download the current version:
git clone https://github.com/mxe/mxe.git
If you don't mind installing it in your home directory, just skip the following step and go straight to step 3.
MXE builds and installs everything under the same top-level directory and is not relocatable after the first packages are built.
Due to limitations of GNU Make, the path of MXE is not allowed to contain any whitespace characters.
Now you should save any previous installation of the MXE. Assuming you've installed it under /opt/mxe (any other directory will do as well), you should execute the following commands:
su mv /opt/mxe /opt/mxe.old exit
Then you need to transfer the entire directory to its definitive location. We will assume again you use /opt/mxe, but feel free to use any other directory if you like.
su mv mxe /opt/mxe exit
We're almost done. Just change to your newly created directory and get going:
cd /opt/mxe
Enter the directory where you've downloaded MXE. Now it depends on what you actually want – or need.
If you choose to enter:
make
you're in for a long wait, because it compiles a lot of packages. On the other hand it doesn't require any intervention, so you're free to do whatever you like – like watch a movie or go for a night on the town. When it's done you'll find that you've installed a very capable Win32 cross compiler onto your system.
If you only need the most basic tools you can also use:
make gcc
and add any additional packages you need later on. You can also supply a host of packages on the command line, e.g.:
make gtk lua libidn
Targets can also be specified on the command line. By default, only i686-w64-mingw32.static is built, but you can build your toolchain(s) of choice with:
make MXE_TARGETS='x86_64-w64-mingw32.static i686-w64-mingw32.static'
or by adjusting the MXE_TARGETS variable
in settings.mk.
You'll always end up with a consistent cross compiling environment.
If you have trouble here, please feel free to contact the mxe team through the issue tracker or mailing list.
After you're done it just needs a little post-installation.
Edit your .bashrc script in order to change $PATH:
export PATH=/where MXE is installed/usr/bin:$PATH
You may be tempted to also add $(TARGET)/bin
to your path. You never want to do this,
the executables and scripts in there will cause conflicts
with your native toolchain.
In case you are using custom $PKG_CONFIG_PATH entries, you can add separate entries for cross builds:
export PKG_CONFIG_PATH="entries for native builds"
export PKG_CONFIG_PATH_i686_w64_mingw32_static="entries for MXE builds"
Remember to use i686-w64-mingw32.static-pkg-config instead of pkg-config for cross builds. The Autotools do that automatically for you.
Note that any other compiler related environment variables (like $CC, $LDFLAGS, etc.) may spoil your compiling pleasure, so be sure to delete or disable those.
For the most isolated and repeatable environment, use a white-list approach:
unset `env | \
grep -vi '^EDITOR=\|^HOME=\|^LANG=\|MXE\|^PATH=' | \
grep -vi 'PKG_CONFIG\|PROXY\|^PS1=\|^TERM=' | \
cut -d '=' -f1 | tr '\n' ' '`
Congratulations! You're ready to cross compile anything you like.
If you use the Autotools, all you have to do is:
./configure --host=i686-w64-mingw32.static make
If you build a library, you might also want to enforce a static build:
./configure --host=i686-w64-mingw32.static --enable-static --disable-shared make
Don't worry about a warning like this:
configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used.
Everything will be just fine.
If you have a CMake project, you can use the provided toolchain file:
cmake ... -DCMAKE_TOOLCHAIN_FILE=/where MXE is installed/usr/i686-w64-mingw32.static/share/cmake/mxe-conf.cmake
If you have a Qt application, all you have to do is:
/where MXE is installed/usr/i686-w64-mingw32.static/qt/bin/qmake make
Note that Qt 4 is in the "qt" subdirectory. Qt 5 is in the "qt5" subdirectory and its qmake can be invoked similarly.
If you are using Qt plugins such as the svg or ico image handlers, you should also have a look at the Qt documentation about static plugins.
Note the sql drivers (-qt-sql-*) and the image handlers for jpeg, tiff, gif and mng are built-in, not plugins.
If you have a handwritten Makefile, you probably will have to make a few adjustments to it:
CC=$(CROSS)gcc LD=$(CROSS)ld AR=$(CROSS)ar PKG_CONFIG=$(CROSS)pkg-config
You may have to add a few others, depending on your project.
Then, all you have to do is:
make CROSS=i686-w64-mingw32.static-
That's it!
Using static OpenSceneGraph libraries requires a few changes to your source. The graphics subsystem and all plugins required by your application must be referenced explicitly. Use a code block like the following:
#ifdef OSG_LIBRARY_STATIC USE_GRAPHICSWINDOW() USE_OSGPLUGIN(<plugin1>) USE_OSGPLUGIN(<plugin2>) ... #endif
Look at examples/osgstaticviewer/osgstaticviewer.cpp in the
OpenSceneGraph source distribution for an example. This example can be
compiled with the following command:
i686-w64-mingw32.static-g++ \
-o osgstaticviewer.exe examples/osgstaticviewer/osgstaticviewer.cpp \
`i686-w64-mingw32.static-pkg-config --cflags openscenegraph-osgViewer openscenegraph-osgPlugins` \
`i686-w64-mingw32.static-pkg-config --libs openscenegraph-osgViewer openscenegraph-osgPlugins`
The i686-w64-mingw32.static-pkg-config command from MXE will
automatically add -DOSG_LIBRARY_STATIC to your compiler flags.
If you need further assistance, feel free to join the mailing list where you'll get in touch with the MXE developers and other users.
To obtain the current version, run:
git clone https://github.com/mxe/mxe.git
To retrieve updates, run:
git pull
You can also browse the web repository.
In addition, feel free to join the mailing list and to propose new packages.
MXE requires a recent Unix system where all components as stated in the table below are installed. It also needs roughly 2 GiB of RAM to link gcc and at least 700 MB of disk space per target (counted with only gcc built).
Detailed instructions are available for:
| Autoconf | ≥ 2.67 |
| Automake | ≥ 1.11.3 |
| Bash | |
| Bison | |
| Bzip2 | |
| CMake | ≥ 2.8.0 |
| Flex | ≥ 2.5.31 |
| GCC (gcc, g++) | |
| Git | ≥ 1.7 |
| GNU Coreutils | |
| GNU Gettext | |
| GNU gperf | |
| GNU Make | ≥ 3.81 |
| GNU Sed | |
| Intltool | ≥ 0.40 |
| LibC for 32-bit | |
| libffi | ≥ 3.0.0 |
| Libtool | ≥ 2.2 |
| OpenSSL-dev | |
| p7zip (7-Zip) | |
| Patch | |
| Perl | |
| Perl XML::Parser | |
| Pkg-config | ≥ 0.16 |
| Python | |
| Ruby | |
| SCons | ≥ 0.98 |
| UnZip | |
| Wget | |
| XZ Utils |
apt-get install \
autoconf automake autopoint bash bison bzip2 cmake flex \
gettext git g++ gperf intltool libffi-dev libtool \
libltdl-dev libssl-dev libxml-parser-perl make openssl \
p7zip-full patch perl pkg-config python ruby scons sed \
unzip wget xz-utils
On 64-bit Debian, install also:
apt-get install g++-multilib libc6-dev-i386
On Debian Jessie (8) or Ubuntu Utopic (14.10) or later, install also:
apt-get install libtool-bin
Only the latest Debian stable series is supported.
yum install \
autoconf automake bash bison bzip2 cmake flex gcc-c++ \
gettext git gperf intltool make sed libffi-devel \
libtool openssl-devel p7zip patch perl pkgconfig \
python ruby scons unzip wget xz
On 64-bit Fedora, there are issues without a 32-bit compiler.
pkg_add -r \
automake autoconf bash bison cmake coreutils flex \
gettext git glib20 gmake gperf gsed intltool libffi \
libtool openssl p5-XML-Parser p7zip patch perl \
pkgconf python ruby scons unzip wget
Ensure that /usr/local/bin precedes /usr/bin in your $PATH:
For C style shells, edit .cshrc
setenv PATH /usr/local/bin:$PATH
For Bourne shells, edit .profile
export PATH = /usr/local/bin:$PATH
On 64-bit FreeBSD, there are issues without a 32-bit compiler.
N.B. FreeBSD is no longer fully supported
to build the remainder of MXE, run:
gmake EXCLUDE_PKGS='gtksourceviewmm2 ocaml% openexr pcl qtbase'
to see a list of all dependent downstream packages that will be excluded, run:
gmake show-downstream-deps-'gtksourceviewmm2 ocaml% openexr \
pcl qtbase'
pacman-g2 -S \
autoconf automake bash bzip2 bison cmake flex gcc \
gettext git gperf intltool make sed libffi libtool \
openssl patch perl perl-xml-parser pkgconfig python \
ruby scons unzip wget xz xz-lzma
On 64-bit Frugalware, there are issues without a 32-bit compiler.
emerge \
sys-devel/autoconf sys-devel/automake app-shells/bash \
sys-devel/bison app-arch/bzip2 dev-util/cmake \
sys-devel/flex sys-devel/gcc sys-devel/gettext \
dev-vcs/git dev-util/gperf dev-util/intltool \
sys-devel/make sys-apps/sed dev-libs/libffi \
sys-devel/libtool dev-libs/openssl app-arch/p7zip \
sys-devel/patch dev-lang/perl dev-perl/XML-Parser \
dev-util/pkgconfig dev-lang/python dev-lang/ruby \
dev-util/scons app-arch/unzip net-misc/wget \
app-arch/xz-utils
Install Xcode 5
Install MacPorts, then run:
sudo port install \
glib2 intltool p5-xml-parser p7zip gpatch scons wget xz
Install Rudix you can make it with following command
curl -s https://raw.githubusercontent.com/rudix-mac/rpm/2014.6/rudix.py \
| sudo python - install rudix
then run:
sudo rudix install glib pkg-config scons wget xz
After installing pre-requirement run from within the mxe directory:
make build-requirements
You may be prompted to install a java runtime - this is not required.
Mac OS X versions ≤ 10.7 are no longer supported.
zypper install -R \
autoconf automake bash bison bzip2 cmake flex gcc-c++ \
gettext-tools git gperf intltool libffi-devel libtool \
make openssl libopenssl-devel p7zip patch perl \
perl-XML-Parser pkg-config python ruby scons sed unzip \
wget xz
On 64-bit openSUSE, install also:
zypper install -R \
gcc-32bit glibc-devel-32bit libgcc46-32bit \
libgomp46-32bit libstdc++46-devel-32bit
Certain packages contain native tools that are currently 32-bit only. In order to build these on a 64-bit system, multi-lib support must be enabled in the compiler toolchain. However, not all operating systems support this.
To build the remainder of MXE, specify the affected packages to exclude:
make EXCLUDE_PKGS='ocaml%'
All build commands also download the packages if necessary.
In a BSD userland, substitute "make" with "gmake" as all commands are based on GNU Make.
settings.mk
LOCAL_PKG_LIST := foo bar .DEFAULT local-pkg-list: local-pkg-list: $(LOCAL_PKG_LIST)
make will only build those packages (and their
dependencies, of course)
settings.mk and defaults to the number
of CPUs up to a max of 6 to prevent runaway system
load with diminishing returns - see the
GNU Make manual
for more details on parallel execution
See something missing? Feel free to create a new package.
| a52dec | a52dec (aka. liba52) |
| agg | Anti-Grain Geometry |
| alure | alure |
| apr | APR |
| apr-util | APR-util |
| armadillo | Armadillo C++ linear algebra library |
| aspell | Aspell |
| assimp | Assimp Open Asset Import Library |
| atk | ATK |
| atkmm | ATKmm |
| aubio | aubio |
| autoconf | autoconf |
| automake | automake |
| bfd | Binary File Descriptor library |
| binutils | GNU Binutils |
| bison | bison |
| blas | blas |
| boost | Boost C++ Library |
| box2d | Box2D |
| bullet | Bullet physics, version 2 |
| bzip2 | bzip2 |
| cairo | cairo |
| cairomm | cairomm |
| cblas | cblas |
| ccfits | CCfits |
| cegui | Crazy Eddie’s GUI System (CEGUI) |
| cfitsio | cfitsio |
| cgal | cgal |
| check | check |
| chipmunk | Chipmunk Physics |
| chromaprint | Chromaprint |
| cmake | cmake |
| cminpack | cminpack |
| coreutils | GNU Core Utilities |
| cppunit | CppUnit |
| crystalhd | Broadcom Crystal HD Headers |
| cunit | cunit |
| curl | cURL |
| dbus | dbus |
| dcmtk | DCMTK |
| devil | DevIL |
| dlfcn-win32 | POSIX dlfcn wrapper for Windows |
| eigen | eigen |
| exiv2 | Exiv2 |
| expat | Expat XML Parser |
| faad2 | faad2 |
| fdk-aac | FDK-AAC |
| ffmpeg | ffmpeg |
| fftw | fftw |
| file | file |
| flac | FLAC |
| flann | FLANN |
| flex | flex |
| fltk | FLTK |
| fontconfig | fontconfig |
| freeglut | freeglut |
| freeimage | FreeImage |
| freetds | FreeTDS |
| freetype | freetype |
| freetype-bootstrap | freetype (without harfbuzz) |
| fribidi | FriBidi |
| ftgl | ftgl |
| gc | gc |
| gcc | GCC |
| gcc-gmp | GMP for GCC |
| gcc-isl | ISL for GCC |
| gcc-mpc | MPC for GCC |
| gcc-mpfr | MPFR for GCC |
| gd | GD (without support for xpm) |
| gdal | GDAL |
| gdb | gdb |
| gdk-pixbuf | GDK-pixbuf |
| gendef | gendef |
| geos | GEOS |
| gettext | gettext |
| giflib | giflib |
| glew | GLEW |
| glfw2 | GLFW 2.x |
| glfw3 | GLFW 3.x |
| glib | GLib |
| glibmm | GLibmm |
| gmp | GMP |
| gnutls | GnuTLS |
| gperf | GNU gperf |
| graphicsmagick | GraphicsMagick |
| gsl | GSL |
| gsoap | gSOAP |
| gst-plugins-base | gst-plugins-base |
| gst-plugins-good | gst-plugins-good |
| gstreamer | gstreamer |
| gta | gta |
| gtk2 | GTK+ |
| gtk3 | GTK+ |
| gtkglarea | GtkGLArea |
| gtkglext | GtkGLExt |
| gtkglextmm | GtkGLExtmm |
| gtkimageview | GtkImageView |
| gtkmm2 | GTKMM |
| gtkmm3 | GTKMM |
| gtksourceview | GTKSourceView |
| gtksourceviewmm2 | GtkSourceViewmm |
| guile | GNU Guile |
| harfbuzz | HarfBuzz |
| hdf4 | HDF4 |
| hdf5 | HDF5 |
| hunspell | Hunspell |
| icu4c | ICU4C |
| id3lib | id3lib |
| ilmbase | IlmBase |
| imagemagick | ImageMagick |
| intltool | Intltool |
| isl | Integer Set Library |
| itk | Insight Segmentation and Registration Toolkit (ITK) |
| jack | JACK Audio Connection Kit |
| jansson | Jansson |
| jasper | JasPer |
| jpeg | jpeg |
| json-c | json-c |
| json_spirit | json_spirit |
| jsoncpp | jsoncpp |
| lame | lame |
| lapack | lapack |
| lcms | lcms |
| lcms1 | lcms1 |
| lensfun | lensfun |
| levmar | levmar |
| libaacs | libaacs |
| libarchive | Libarchive |
| libass | libass |
| libbluray | libbluray |
| libbs2b | Bauer Stereophonic-to-Binaural library |
| libcaca | libcaca |
| libcdio | Libcdio |
| libcdio-paranoia | Libcdio-paranoia |
| libcomm14cux | libcomm14cux |
| libcroco | Libcroco |
| libdca | libdca (formerly libdts) |
| libdnet | libdnet |
| libdvbpsi | libdvbpsi |
| libdvdcss | libdvdcss |
| libdvdnav | libdvdnav |
| libdvdread | libdvdread |
| libepoxy | libepoxy |
| libevent | libevent |
| libf2c | libf2c |
| libffi | libffi |
| libftdi | LibFTDI |
| libftdi1 | LibFTDI1 |
| libgcrypt | libgcrypt |
| libgda | libgda |
| libgdamm | libgdamm |
| libgee | libgee |
| libgeotiff | GeoTiff |
| libglade | glade |
| libgnurx | libgnurx |
| libgomp | GCC-libgomp |
| libgpg_error | libgpg-error |
| libgsasl | Libgsasl |
| libgsf | libgsf |
| libharu | libharu |
| libiberty | libiberty |
| libical | libical |
| libiconv | libiconv |
| libidn | Libidn |
| libircclient | libircclient |
| libjpeg-turbo | libjpeg-turbo |
| liblaxjson | liblaxjson |
| liblo | liblo |
| liblqr-1 | liblqr-1 |
| libltdl | GNU Libtool Library (libltdl) |
| libmad | libmad |
| libmicrohttpd | GNU Libmicrohttpd |
| libmikmod | libMikMod |
| libmng | libmng |
| libmodplug | libmodplug |
| libmpcdec | libmpcdec |
| libntlm | Libntlm |
| liboauth | liboauth |
| libodbc++ | libodbc++ |
| liboil | liboil |
| libpano13 | libpano13 |
| libpaper | libpaper |
| libpng | libpng |
| librsvg | librsvg |
| librtmp | librtmp |
| libsamplerate | libsamplerate |
| libshout | libshout |
| libsigc++ | libsigc++ |
| libsndfile | libsndfile |
| libssh2 | libssh2 |
| libsvm | libsvm |
| libtool | GNU Libtool |
| libunistring | libunistring |
| libusb | LibUsb |
| libusb1 | LibUsb-1.0 |
| libvpx | vpx |
| libwebp | libwebp |
| libwebsockets | libwebsockets |
| libxml++ | libxml2 |
| libxml2 | libxml2 |
| libxslt | libxslt |
| libzip | libzip |
| llvm | llvm |
| log4cxx | log4cxx |
| lua | Lua |
| luabind | Luabind |
| luajit | LuaJIT |
| lzo | lzo |
| m4 | GNU M4 |
| make | GNU Make |
| matio | matio |
| mdbtools | mdbtools |
| minizip | minizip |
| mingw-w64 | MinGW-w64 Runtime |
| mman-win32 | MMA-Win32 |
| mpc | GNU MPC |
| mpfr | mpfr |
| mpg123 | mpg123 |
| muparser | muParser |
| mxml | Mini-XML |
| ncurses | Ncurses |
| netcdf | NetCDF |
| netpbm | Netpbm |
| nettle | nettle |
| nlopt | NLopt |
| nsis | NSIS |
| ocaml-cairo | cairo-ocaml |
| ocaml-camlimages | camlimages |
| ocaml-core | ocaml |
| ocaml-findlib | findlib |
| ocaml-flexdll | flexdll |
| ocaml-lablgl | lablgl |
| ocaml-lablgtk2 | lablgtk2 |
| ocaml-native | ocaml |
| ocaml-xml-light | xml-light |
| oce | Open CASCADE Community Edition |
| ogg | OGG |
| old | old |
| openal | openal |
| openblas | OpenBLAS |
| opencore-amr | opencore-amr |
| opencsg | opencsg |
| opencv | OpenCV |
| openexr | OpenEXR |
| openjpeg | OpenJPEG |
| openmp-validation | OpenMP Validation Suite |
| openscenegraph | OpenSceneGraph |
| openssl | openssl |
| opus | opus |
| opusfile | opusfile |
| pango | Pango |
| pangomm | Pangomm |
| pcl | PCL (Point Cloud Library) |
| pcre | PCRE |
| pdcurses | PDcurses |
| pdflib_lite | PDFlib Lite |
| pfstools | pfstools |
| physfs | physfs |
| picomodel | picomodel |
| pire | PIRE |
| pixman | pixman |
| pkgconf | pkgconf |
| plib | Plib |
| plibc | Plibc |
| plotmm | PlotMM |
| plotutils | plotutils |
| poco | POCO C++ Libraries |
| polarssl | Polar SSL Library |
| poppler | poppler |
| popt | popt |
| portablexdr | PortableXDR |
| portaudio | portaudio |
| portmidi | portmidi |
| postgresql | PostgreSQL |
| primesieve | Primesieve |
| proj | proj |
| protobuf | protobuf |
| pthreads | POSIX Threads |
| qdbm | QDBM |
| qhttpengine | qhttpengine |
| qjson | QJson |
| qscintilla2 | QScintilla2 |
| qt | Qt |
| qt3d | Qt |
| qt5 | Qt |
| qtactiveqt | Qt |
| qtbase | Qt |
| qtconnectivity | Qt |
| qtdeclarative | Qt |
| qtenginio | Qt |
| qtgraphicaleffects | Qt |
| qtimageformats | Qt |
| qtlocation | Qt |
| qtmultimedia | Qt |
| qtquick1 | Qt |
| qtquickcontrols | Qt |
| qtscript | Qt |
| qtsensors | Qt |
| qtserialport | Qt |
| qtserialport_qt4 | Qt |
| qtservice | Qt Solutions |
| qtsvg | Qt |
| qtsystems | Qt |
| qttools | Qt |
| qttranslations | Qt |
| qtwebchannel | Qt |
| qtwebengine | Qt |
| qtwebkit | Qt |
| qtwebsockets | Qt |
| qtwinextras | Qt |
| qtxlsxwriter | QtXlsxWriter |
| qtxmlpatterns | Qt |
| qwt | Qwt |
| qwt_qt4 | Qwt-qt4 |
| qwtplot3d | QwtPlot3D |
| readline | Readline |
| rubberband | Rubberband |
| rucksack | rucksack |
| sdl | SDL |
| sdl_gfx | SDL_gfx |
| sdl_image | SDL_image |
| sdl_mixer | SDL_mixer |
| sdl_net | SDL_net |
| sdl_pango | SDL_Pango |
| sdl_rwhttp | SDL_rwhttp |
| sdl_sound | SDL_sound |
| sdl_ttf | SDL_ttf |
| sdl2 | SDL2 |
| sdl2_gfx | SDL2_gfx |
| sdl2_image | SDL2_image |
| sdl2_mixer | SDL2_mixer |
| sdl2_net | sdl2_net |
| sdl2_ttf | SDL2_ttf |
| sed | GNU sed |
| sfml | SFML |
| smpeg | smpeg |
| smpeg2 | smpeg |
| sox | SoX |
| speex | Speex |
| sqlite | SQLite |
| suitesparse | SuiteSparse |
| t4k_common | t4k_common |
| taglib | TagLib |
| teem | Teem |
| termcap | Termcap |
| theora | Theora |
| tiff | LibTIFF |
| tinyxml | tinyxml |
| tinyxml2 | tinyxml2 |
| tre | TRE |
| twolame | TwoLAME |
| vamp-plugin-sdk | Vamp Plugins SDK |
| vcdimager | vcdimager |
| vidstab | vid.stab video stablizer |
| vigra | vigra |
| vmime | VMime |
| vo-aacenc | VO-AACENC |
| vo-amrwbenc | VO-AMRWBENC |
| vorbis | Vorbis |
| vtk | vtk |
| vtk6 | VTK6 |
| wavpack | WavPack |
| wget | wget |
| widl | Wine IDL Compiler |
| winpcap | WinPcap |
| winpthreads | MinGW w64 pthreads |
| wt | Wt |
| wxwidgets | wxWidgets |
| x264 | x264 |
| xapian-core | Xapian-Core |
| xerces | Xerces-C++ |
| xine-lib | xine-lib |
| xmlrpc-c | xmlrpc-c |
| xmlwrapp | xmlwrapp |
| xorg-macros | X.org utility macros |
| xvidcore | xvidcore |
| xz | XZ |
| yasm | Yasm |
| zlib | zlib |
| zziplib | ZZIPlib |
The package should be a free software library that is really used by one of your applications. Please also review our legal notes.
BTW, we're always curious about the applications people are porting. We maintain a list of projects which use MXE. No matter whether your project is free or proprietary – as long as it has its own website, we'd be happy to link to it.
Also, feel free to link to us. :-)
Grep through the src/*.mk files
to find a project that is most similar to yours.
(Really, grep is your friend here.)
For instance, when adding a GNU library, you should take a package like gettext.mk or libiconv.mk as the base of your work. When using a SourceForge project, you could start with a copy of xmlwrapp.mk. And so on.
The GNU Make Standard Library is also available (though it should be unnecessary for most packages).
Adjust the comments,
fill in the $(PKG)_* fields.
To fill the $(PKG)_CHECKSUM field, use a command such as (for file gettext.mk):
make update-checksum-gettext
or:
openssl sha1 pkg/gettext-x.y.z.tar.gz
if you have already downloaded the package
Be especially careful with the $(PKG)_DEPS section.
The easiest way to get the dependencies right
is to start with a minimal setup.
That is,
initialize MXE with make gcc only,
then check whether your package builds successfully.
Always list the dependency on gcc explicitly:
$(PKG)_DEPS := gcc ...
Add your package to the list of packages.
Each package gets its own table row element with table cells specifying your package name, official name and website:
<tr>
<td class="package">gettext</td>
<td class="website"><a href="">gettext</a></td>
</tr>
Always look for the SSL version of a website, that is,
prefer https:// URLs over http:// URLs.
Write your $(PKG)_BUILD.
If your library has a ./configure script,
enable/disable all dependency libraries explicitly
via "--enable-*" and "--disable-*" options.
You might also have to provide a patch for it. In that case, have a look at other patches such as sdl2-2-libtool.patch. In particular, each patch file should be named as:
PACKAGE-PATCHNUMBER-DESCRIPTION.patch
and should start with:
This file is part of MXE. See index.html for further information. This patch has been taken from: https://...
where the URL points to the bugtracker entry, mailing list entry or website you took the patch from.
If you created the patch yourself, please offer it to the upstream project first, and point to that URL, using the same wording: "This patch has been taken from:".
Depending on the feedback you get from the upstream project, you might want to improve your patch.
If you find some time, please provide a minimal test program for it. It should be simple, stand alone and should work unmodified for many (all?) future versions of the library. Test programs are named as:
PACKAGE-test.cor
PACKAGE-test.cpp
depending on whether it is a C or C++ library. To get a clue, please have a look at existing test programs such as sdl-test.c.
At the very end of your *.mk file
you should build the test program in a generic way,
using strict compiler flags.
The last few lines of
sdl.mk
will give you a clue.
You could also try to provide a $(PKG)_UPDATE section.
However, that requires some experience and "feeling" for it.
So it is perfectly okay if you leave a placeholder:
define $(PKG)_UPDATE
echo 'TODO: write update script for $(PKG).' >&2;
echo $($(PKG)_VERSION)
endef
We'll fill that in for you. It's a funny exercise.
Check that you don't have "dirty stuff" in your *.mk files,
such as TAB characters or trailing spaces at lines endings. Run:
make cleanup-style
to remove these.
Have a look at random *.mk files
to get a feeling for the coding style.
The same holds for your test program.
However, patch files should always appear in the same coding style as the files they are patching.
When patching sources with crlf line endings, the patch
file itself should also have the same eol style. Use the
convention of naming the file as *crlf.patch
to instruct git not to normalise the line endings (defined
in .gitattributes).
Finally, in your $(PKG)_BUILD section,
please check that you use our portability variables:
bash | → | $(SHELL) |
date | → | $(DATE) |
install | → | $(INSTALL) |
libtool | → | $(LIBTOOL) |
libtoolize | → | $(LIBTOOLIZE) |
make | → | $(MAKE) |
patch | → | $(PATCH) |
sed | → | $(SED) |
sort | → | $(SORT) |
wget | → | $(WGET) |
Check whether everything runs fine.
If you have some trouble,
don't hesitate to ask on the
mailing list,
providing your *.mk file so far.
Issue a
pull request
to propose your final *.mk file to us.
If you have trouble with pull requests,
send your file to the mailing list instead.
Either way,
don't forget to tell us
if there are some pieces in your *.mk file
you feel unsure about.
We'll then have a specific look at those parts,
which avoids trouble for you and us in the future.
(contact via the project mailing list)
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Modern legal systems are like any other large, complex, and evolving body of code you're likely to encounter.
They have their own language with quirky parsers, compilers, and interpreters (though these tend to be human). Their issue trackers are a backlog of court cases. They have bugs. They have traps for the uninitiated that may potentially do more than waste your time.
We currently limit ourselves to:
--enable-languages='c,c++,objc,fortran'
so nothing mentioned here or on the mailing list should be taken as legal advice. :-)
The best starting point for any legal questions would be the
FTF (Freedom Task Force of the FSFE (Free Software Foundation Europe)).
They have been very helpful in the past, and maintain an extensive network of legal contacts, both within and outside Europe.
Your local jurisdiction may be a signatory to various international agreements, so be sure to mention where you are in any correspondence (much like any detailed bug report really).
Additionally, you should also do some background reading from the FSF (Free Software Foundation) and Wikipedia to familiarise yourself with some of the potential issues (and experience some context-switching overhead).
Contributions are always welcome!
Ownership of all contributions (bug fixes, new packages, doc updates, etc.) remain with the author. All we require is a real name (no l33t handles, please), and that you release your work under our licence.
If you prefer not to be credited with a contribution, please notify the committer.
Each package is individually licensed under terms specified by the authors of that package. Please see the respective source tarball and/or project website for details.
Packages that are non-free or ambiguous will be removed or rejected.
The definition of free must be one of:
Please contact the mailing list if you notice a package that doesn't meet these guidlines.
In addition to the usual considerations (copyrights, patents, trademarks, export regulations etc.), building statically linked libraries for Windows exposes some edge cases that you may not have encountered before.
According to freedom 0 and our own licence, you can use mxe in countless different environments, each with it's own special legal considerations. The configuration options of certain packages (e.g ffmpeg) allow the use of non-free software and/or combinations that cause license violations.
For these packages, we will provide sensible defaults aimed at achieving the following goals:
Note that this does not prevent downstream violations, or affect any further obligations a licence may impose on you.
Review the FAQ
Review the Differences from the GPL section of the Wikipedia article mentioned above.
See conflicting accounts from the FSF and the OpenSSL project.
A similar situation also exists for package fdk-aac.
The stable branch was retired as it did more harm than good. Everybody is using the master branch, because it is always recent and well enough tested. For historical reference, the last commit to the stable branch was 0c6cc9c, which was fully merged into master as usual.
Added support for shared toolchains for over 50% of all the packages.
Unfortunately, a number of factors have forced us to drop support for MinGW 3 (i.e. "MinGW.org"), in favor of the MinGW-w64 toolchain. This decision was made in a large part because of the dropping of support for MinGW by GLib and Qt5, which arguably are two of the most important packages in MXE. Other considerations have also been taken, like the lack of maintainership in MinGW and potential legal challenges that comes with using supplemental DirectX headers in MinGW in order to support Qt4. Worse yet, having to support the unsupported MinGW toolchain impedes adding or updating packages, as shown in the pull request of updating GLib.
Please note that dropping support for MinGW DOES NOT MEAN dropping support for the 32-bit architecture. MinGW-w64 also supports 32-bit target through i686-w64-mingw32.
To ease migration to the supported MinGW-w64 target, we have
finished porting all packages that were MinGW-only to at least
i686-w64-mingw32 (32-bit target of MinGW-w64). Hence your existing
commands should work out-of-the-box assuming the
MXE_TARGETS environmental variable is set correctly.
The stable branch was updated to the current development version after a thorough testing phase.
Current users are strongly encouraged to start with a clean tree as the toolchain has been updated and requires a full rebuild:
git pull && make clean && make
Most packages were updated to their latest version.
Many new packages are supported: alure, apr-util, apr, armadillo, cegui, cfitsio, cminpack, flann, gtkglarea, gtkimageview, harfbuzz, hdf4, hdf5, hunspell, icu4c, itk, lensfun, levmar, libf2c, libftdi, libgda, libgdamm, libglade, liblqr-1, libmodplug, librtmp, libzip, log4cxx, mdbtools, ncurses, netcdf, netpbm, ocaml-cairo, ocaml-camlimages, ocaml-core, ocaml-findlib, ocaml-flexdll, ocaml-lablgl, ocaml-lablgtk2, ocaml-native, ocaml-xml-light, opencv, opus, opusfile, pcl, picomodel, plib, plibc, poppler, portablexdr, portmidi, protobuf, qdbm, qt5, qtactiveqt, qtbase, qtdeclarative, qtgraphicaleffects, qtimageformats, qtjsbackend, qtmultimedia, qtquick1, qtquickcontrols, qtscript, qtsensors, qtserialport, qtsvg, qttools, qttranslations, qtxmlpatterns, qwt, sdl_gfx, sfml, sox, teem, twolame, vtk6, wavpack, wget, winpthreads, xapian-core, yasm
Added support for mingw-w64 based toolchains targeting 32 & 64-bit architectures.
With the addition of Qt5, there is no longer a prefixed version of qmake, see the Qt section of the tutorial for the new way to invoke qmake.
FreeBSD is no longer fully supported. Qt5, ocaml*, and 8 other packages are excluded from the build.
The release tarballs have been replaced with a stable branch that conforms to the new branch concept:
The project has been renamed from mingw-cross-env (MinGW cross compiling environment) to MXE (M cross environment).
Most packages were updated to their latest version.
New packages are supported: agg, cgal, eigen, file, gta, json-c, libgnurx, libharu, libircclient, libssh2, libxml++, llvm, lzo, mpfr, nettle, opencsg, qjson, qwtplot3d, vtk, and wt.
Minor bugfixes in several packages.
Almost all packages are updated to their latest version.
Packages gtkmm and gtksourceviewmm have been renamed to gtkmm2 and gtksourceviewmm2.
New packages are supported: libass, poco, and t4k_common.
This release fixes a download error caused by the pixman project (a sudden change of their URL scheme without proper redirects). That sort of thing should never happen!
The download mechanisms are improved.
A CMake toolchain file is provided to simplify cross-compiling projects which use CMake.
Support for Debian/Lenny is dropped.
Package gtk is renamed to gtk2.
Almost all packages are updated to their latest version.
New packages are supported: dbus, graphicsmagick, libical, liboauth, physfs, and vigra.
Note for boost::filesystem users:
Version 3 is a major revision
and now the default in 1.46.
This release fixes a checksum error caused by the atkmm project (a sudden change of their current source tarball). That sort of thing should never happen!
This release provides some improvements of the build system such as an automatic check for most of the requirements.
All packages are updated to their latest version.
New packages are supported: bfd, blas, cblas, dcmtk, ftgl, lapack, lcms1, mingw-utils, mxml, suitesparse and tinyxml.
This release provides lots of improvements to the build system as well as the documentation.
Support for OpenSolaris is dropped.
Almost all packages are updated to their latest version.
Many new packages are supported: atkmm, cairomm, cunit, faac, faad2, ffmpeg, gdk-pixbuf, glibmm, gtkglextmm, gtkmm, gtksourceview, gtksourceviewmm, imagemagick, lame, libiberty, libsigc++, libvpx, matio, openal, opencore-amr, pangomm, pfstools, plotmm, sdl_sound and x264.
This release fixes download errors caused by the Qt project (a sudden change of their current source tarball).
Almost all packages are updated to their latest version.
This release fixes download errors caused by the MinGW project (a sudden change of their URL scheme without proper redirects). That sort of thing should never happen!
Almost all packages are updated to their latest version.
New packages are supported: libarchive, libgee and xvidcore.
This release switches back from TDM to the official GCC, thus supporting the current GCC 4.5.
The set of DirectX headers is improved and more complete.
The deadlock issues with Pthreads-w32 are fixed.
A static build of GDB is provided, i.e. a standalone "gdb.exe" that doesn't require any extra DLLs.
More packages are backed by test programs.
Many "sed hacks" are replaced by proper portability patches.
Almost all packages are updated to their latest version.
Many new packages are supported: fribidi, gc, gdb, gmp, gsl, gst-plugins-base, gst-plugins-good, gstreamer, gtkglext, guile, libcroco, libffi, liboil, libpaper, libshout, libunistring and xine-lib.
This release fixes some minor build issues, and contains a first small set of test programs to check the package builds.
The build rules are simplified by calling generators like Autotools and Flex, instead of patching the generated files.
Almost all packages are updated to their latest version.
Many new packages are supported: aubio, devil, directx, exiv2, fftw, freeimage, gsoap, id3lib, liblo, libpano13, librsvg, libsamplerate, muparser, openscenegraph, portaudio and sdl_pango.
This release contains a packaging bug. Please use release 2.12 instead.
This release adds support for many new packages: flac, libmad, libsndfile, sdl_net, speex, postgresql, freetds, openssl, plotutils, taglib, lcms, freeglut, xerces and zziplib.
Almost all packages are updated to their latest version.
In addition to the libraries some command line tools such as psql.exe are built, too.
The placements of logfiles, as well as many other build details, have been improved.
This release adds support for Qt, VMime and libmng.
The target triplet is updated to i686-pc-mingw32.
OpenMP support is enabled in GCC.
Almost all packages are updated to their latest version.
This release comes with a better look & feel by providing a highlevel overview of the build process.
The detailed build messages are stored into separate log files for each package, so parallel builds don't intermix them anymore.
The download URLs of SourceForge packages are adjusted to ensure that the selected SourceForge mirror is really used and not circumvalented via HTTP redirects to other mirrors.
Almost all packages are updated to their latest version.
The whole mingw-cross-env project has moved to Savannah. So all URIs have changed, but the old URIs redirect to the new locations seamlessly.
Everyone is invited to join the freshly created project mailing list.
This release provides an improved version recognition for SourceForge packages. SourceForge changed their page layout in a way that makes it much harder to identify the current version of a package.
Additionally, almost all packages are updated to their latest version.
This release contains some portability fixes which allow it to run on a wider range of systems such as Frugalware.
The documentation and website are completely revised.
New packages such as CppUnit, libUsb, NSIS, Popt, SQLite and Theora are supported.
Almost all packages are updated to their latest version.
A new command "make download" is implemented.
This release fixes a download error caused by the MinGW project. They suddenly changed the names of their source tarballs. That sort of thing should never happen!
This release also contains some bugfixes which allow it to run on a wider range of systems.
All downloaded files are now verified by their SHA-1 checksums.
New versions of various packages are supported.
This release provides many new libraries such as wxWidgets, GTK+ and OpenEXR.
In addition, new versions of various packages are supported.
This release fixes some serious build problems on FreeBSD and MacOS-X.
The Makefile has a new target "clean-pkg" and allows to be called from a separate build directory via "make -f .../Makefile".
Some new versions of the packages are supported, especially GCC-4.3 by switching from MinGW GCC to TDM-GCC.
This release fixes some minor build problems.
It also supports some new packages and some newer versions of the already supported packages.
Parallelization is now disabled by default.
This release fixes a download error caused by the GDAL project. They suddenly changed their download URLs. That sort of thing should never happen!
In addition, some newer versions of various packages are supported.
There is also a small compatibility fix for OS X.
The shell script has been rewritten as Makefile and supports partial builds and parallel builds.
As usual, this release also supports some new packages and some newer versions of the already supported packages.
This release now includes a tutorial by Hans Bezemer and has improved compile options of FLTK. As usual, it supports some newer versions of the libraries.
At the request of its author, libowfat is no longer supported from this release on.
The script now uses a specific SourceForge mirror instead of randomly chosen ones, because the download phase often stumbled on some very slow mirrors.
A sudden change in the download URLs of GEOS made the automatic download fail. Such changes should never happen! But it happened, and this quick release is an attempt to limit the damage.
This release also supports some newer versions of the libraries including support for fontconfig-2.5.0.
This release is a switch from gcc-3 to gcc-4. It also supports a new library and some newer versions of the already supported libraries.
This release is the result of the public attention the release 1.0 got. It contains many improvements suggested by its first users, and adds support for many new libraries.
Thanks to Rocco Rutte who contributed many code snippets.
This first release has been created in a 7-day-sprint.
glib-1-fixes.patch
Description: Binary data
pango.mk
Description: Binary data
pango-1-fixes.patch
Description: Binary data
gtk3.mk
Description: Binary data
gtk3-1-fixes.patch
Description: Binary data
gtk3-test.c
Description: Text Data
gtkmm3.mk
Description: Binary data
gtkmm3-test.cpp
Description: Text Data
| [Prev in Thread] | Current Thread | [Next in Thread] |