[paparazzi-commits] [paparazzi/paparazzi] 8aeaa5: [Makefile] find correct lablgtk2 init

[GitHub]

  Branch: refs/heads/master
  Home:   https://github.com/paparazzi/paparazzi
  Commit: 8aeaa5d63033fb49974b87be32f86d11a742a96a
      
https://github.com/paparazzi/paparazzi/commit/8aeaa5d63033fb49974b87be32f86d11a742a96a
  Author: Felix Ruess <address@hidden>
  Date:   2013-04-25 (Thu, 25 Apr 2013)

  Changed paths:
    M sw/ext/libopencm3
    M sw/ground_segment/cockpit/Makefile

  Log Message:
  -----------
  [Makefile] find correct lablgtk2 init


  Commit: f299d701fec0bfc2618fb4f48b0f00752e787bfc
      
https://github.com/paparazzi/paparazzi/commit/f299d701fec0bfc2618fb4f48b0f00752e787bfc
  Author: Felix Ruess <address@hidden>
  Date:   2013-04-25 (Thu, 25 Apr 2013)

  Changed paths:
    M sw/supervision/pc_aircraft.ml

  Log Message:
  -----------
  [paparazzicenter] also check PRINT_CONFIG for upload button


  Commit: 84ab3bde4c05c207fbbdcaaa6591e0ed96ee7b8e
      
https://github.com/paparazzi/paparazzi/commit/84ab3bde4c05c207fbbdcaaa6591e0ed96ee7b8e
  Author: Felix Ruess <address@hidden>
  Date:   2013-04-25 (Thu, 25 Apr 2013)

  Changed paths:
    M Makefile
    M sw/ground_segment/tmtc/Makefile

  Log Message:
  -----------
  [Makefile] ground_segment.opt target to build native gcs/server


  Commit: 360bf6965f518b8c1c8321689bd2be13e6a3f2de
      
https://github.com/paparazzi/paparazzi/commit/360bf6965f518b8c1c8321689bd2be13e6a3f2de
  Author: Felix Ruess <address@hidden>
  Date:   2013-04-25 (Thu, 25 Apr 2013)

  Changed paths:
    M sw/airborne/firmwares/rotorcraft/autopilot.c

  Log Message:
  -----------
  [rotorcraft] fix FAILSAFE vertical setpoint

This was a regression, thx Michal for catching this!!
The vertical speed setpoint was set to 0.5m/s descent rate, but upon
guidance_v_mode_changed it was set back to zero so FAILSAFE was essentially 
alitude hold.


Compare: 
https://github.com/paparazzi/paparazzi/compare/eecac3e67d09...360bf6965f51